How do you apply filters, settings, levels etc. to a photo in 1 step?
When I edit photos I'm going through a long process by going through each step or modification that I use. Is there a way to gather up all settings that I save (i.e. level, selective color, channel mixer, curve settings, etc.) and just apply it to the photo without having to go through the long process of adding these adjustments one by one for every picture I edit?
I just installed Photoshop CS3 on Win XP Prof and when started using it I could not apply any filters to layers.
Created an 8 bit RGB file went to Filter Gallery, chose a filter, saw the results, pressed OK and nothing happend.
Logged in as Administrator and Filter Galleries worked fine so I assume there is a permission problem but could not find which file to change permission for.
I want to change permissions so a "Users" account can use the filters.
Running CS3 on Vista 64bit.
When I try to apply a filter (in this case distort-glass) on a regular RGB 8bit layer(1 or above), it wont work. If however, I draw something on the base (background) layer and apply the filter to that, it works fine. Seems it does not like transparent backgrounds.
I run photoshop 13.0.4 through Creative Cloud, and I've just discovered that I cannot apply certain filters (such as blurs or liquify) to a smart object, even though I am told that this was "fixed" in a recent update.
View 5 Replies View RelatedSteps to reproduce
open new image
add noise
now try to add unsharpen mask or curves (there are other that dont apply as well but.....)
you can see the effects in preview
click OK and the changes do not apply
I am using gimp 2 to make a cartoon/rotoscope video. I used a separate program to remove each individual frame (2400+ frames) from a video as still images that can then be edited in Gimp. What I do is open the image, add two filters, then I save the image. The problem is repeating this over and over for each frame is getting to be very cumbersome and annoying. Is there a way to have the filter apply themselves automatically each time I open a new image? It would make things a lot easier and it would make the process go by much faster. It's annoying having to choose the filters from the drop down list every single time, especially when i keep applying the same 2 filters with the same exact settings every time. The same goes for the size of the image. Is it possible to just set gimp to a certain size and have it open at that same size every single time? It keeps asking me what size I want every time I open a new file. Gimp does remember the last size I typed in, but it still asks me to confirm it every single time i click new.
View 14 Replies View RelatedWhat are the steps to apply filters to all my video clips in Corel Videostudio? I am able to drop each each filter to each of the clip. But when I try - Select all clips - Drop a filter to the selections, it does not work as expected. Instead the filter gets applied only to one clip.
Is there any other way to achieve what I am doing - Automatically fix exposure and colour levels to all clips?
I need to apply filters to hundreds of images at once. Is there some type of Batch plugin to do this? I found the Bulk Image Processor but this does not apply filters, at least as far as I can see.
View 4 Replies View RelatedI would like to be able to apply developement settings to an image and commit to them, so that the sliders would go back to zero and I can use them again.
I know I could export a develped image, then import it and continue developing this image at its intermediate stage.
But is there a way to actually render the selected dev. settings while remaining in the develop module so that I can carry on using the sliders all over again?
I'm creating/selecting plot settings and apply them to my layouts.
The problem is when I open the plot dialog, the name of the page setup is not displayed. when I select the page setup name just created from the combobox, the setup is applied but the name still missing.
But this issue only combined with the new plot settings created in program. The existing page setups manually added from plot dialog are ok.The difference between the two type of plot settings is the .ISMODIFIED property is true for new settings but false for existing settings.
How can I make the plot settings not modified.
what to copy from my home installation of Coreldraw 12 so I can put it on the installation I use at work. I want to save EVERYTHING, hotkeys, default new documents, default and custom palletes, macros, command customizations were I have applied certain hotkeys like ctrl+m or whatever to run those custom made macros/vba scripts, things like snap to grid, snap to object, wether or not to save backups and if so how often, etc... Bascialy ABSOLUTLEY EVERYTHING.
I tried copying CorelDrw.ini, coreldrw.env, and GlobalMacros from my home computer from the folder:
C:Program FilesCorelCorel Graphics 12Draw
and then pasting it into the same folder on my work machine, clicking OK when asked if I want to replace the already existing files there. Some things worked, some things seemed not to. For example, the macros i wrote copied over fine, but the hot key association i made for them didnt, i had to set that up again in Customization.
I would love to find out how I can really back up all my settings so I can simply copy them over to my work machine instead of taking a couple hours to re-enter everything in. Also, I think all serious corel users would want to keep a backup copy handy in case they ever have to re-install corel or if they buy a new computer, etc.
It appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies View RelatedI have hardly ever used filters for any of my work as I have preferred using Xara's native tools and effects to get what I wanted. But recently, I was inspired by some animation work which used backgrounds painted in Photoshop. They used a lot of textures which enhanced the look of the animation and so I thought I'd try to simulate it within Xara.
It works very well and I can export it as a PSD retaining the layers and Alpha channel. But here come my questions.
1. How can I remove the two Alien Skin demo plugins as I already have the full versions.
2. Why don't the native Photoshop plugins--Artistic, Sketch, etc.--seem to work?
In CS3 you could change something to make all filters act like smart filters, even though they won't. I found this worked very well, now I have CS4 and would like to do the same but can't remember what to do to make it work.
View 6 Replies View RelatedI just downloaded a bunch of filters and I dragged them into the filters directory under plugins, but when I open photoshop, none of the filters are there.
View 4 Replies View RelatedI downloaded and installed GIMP 2.8.8 in Windows XP. The Filters menu option shows only Repeat last, Re-show last and Reset all filters.Nothing else in there. Where are the filters?
View 1 Replies View RelatedI am working on a dormitory project and need to provide a required light and ventilation schedule. I have figured out how to create a schedule for each level, but I want to isolate only the Dormitories and the Kitchenette (weed out all the other rooms such as corridor, elevator, storage, toilets, showers, stairs, trash, electrical, etc.).
I tried using seclusion filters, but there are too many items to exclude and cannot fit them all into the 4 filter categories. I am trying to just get the rooms that begin with 'D' and 'K'. I tried providing the variable 'Begins With' for D and in the next line 'Begins With' K, but then nothing shows up.
Is there a way to provide information to the filter that would allow it to show only rooms beginning with D AND K? I cannot seem to get it to work. I have been playing around with separation values within one filter category (i.e. 'Begins With' D, K) but apparently you cannot add multiple variables within one of the filter items.
I have a hatch pattern in one of my objects. I want to apply exactly the same hatch pattern to other objects but I don't remember the settings for original hatch.
There is a command in ACAD to apply properties of one object to others (brush icon in toolbar). I tries to use this command but it seams that it doesn't work for hatch.
What is easiest way to apply a hatch pattern from an object to the other one?
Photoshop CS5 v12.1.
Mac OS 10.6.
I'm printing to an Epson R1800 printer.
Print. Choose Color Management. Choose Document. Choose "Photoshop manages color". Choose the correct printer profile that matches the paper I'm using. Choose Relative Colorimetric.
THEN, I click Print Settings...under the 4th drop downu I choose "Print setting..." again. Under "Basic" "color" and "Color settings" are grayed out as are some of the "Media Type" options.
Is this normal? The problem is my black and white prints are printing really badly. They have color tones. I've cleaned the nozzles on my Epson printer, done everything the print utility suggests. All the test prints look fine.
how I can to reset all the settings back to default settings...
View 3 Replies View Relatedi recieved a prom pic from my daughter and i was going to print it and frame it, but 2 things happend.
The first one was that when i tried to print it it said it was tooooooo big 40inx60in so i resized it to 8.5x11 and it got very blurry, after about an hour i figured out how to get it sharp again (by accident) and forgot how i did it DOH!!! It was some kind of compairson with 4 of the same photo and resizeing the file from 9.5M to about 400kb and actualy adding some blur.
The next problem is when i printed it, it was so washed out it looked like an old 70's poloroid but on screen it looks great. Now I've read the color settings section but i think i might have set some settings wrong [U]and i don't think i fully understand what i'm reading . I know there are settings to either let photoshop take care of the printing or let the printer.Personaly i think i would like to let photoshop do it that way any email's or photo's i shoot will have a common baseline. The printer i'm using is an hp psc 2410 and the camera is a minolta dimage7i, is this a good camera / printer. I'm in adobe rgb(1998) mode and i think i saw somwhere in the printer software to choose between adobe rgb or the hp printer.Do these have to match.
Put simply how can i print it the way i see it on screen
I know ....long winded but i try to give all the info i can
software: adobe photoshop cs2
Card: nvidia geforce ti 4600
crt: compaq mv 940 17in regular screen 1024x768
Printer HP psc 2410
Camera: Minolta Dimage 7i
I’m a long time Photoshop user but recently picked up LR4 to try to fine tune my workflow. I’ve noticed that after importing new files (RAW, I haven’t tried with jpg) into my library as I scroll through them (1-up, not in grid) the preview comes up and then after a second or so the WB changes to a much colder image.
Does LR4 initially preview at specific settings and then change to the individual image settings? Even if so, the final images seem very cool and I feel like I have to up the temp more than I should have to. My previous workflow was to sort in Bridge and then use ACR to import to Photoshop. I feel like I did much less tweaking of my WB this way. I feel like I’m starting from square one with LR4.
Can Photoshop CS6 Camera Raw picture settings be synced with Lightroom 5 picture settings?
View 2 Replies View RelatedI downloaded the Pixel Bender toolkit for my mac. The file are under utilities..how to get the filters in PS CS5.
View 13 Replies View RelatedPS CS5 filters are not all available. re-installed software, same result
View 4 Replies View RelatedWhen I'm editing a file in PS CS5, when I want to used Artistic Filters it's greyed out, as are most of the options in the Filters menu. This happens whatever type of file I'm working on, and it doesn't matter whether I'm working in layers, a flattened image or a fresh image that's completely unedited and am using the background layer.
View 2 Replies View RelatedI frequently use the BPelt Flatten and Multifill plugins and they have always worked perfectly until today. Now I get the following error: "Could not complete the [Multifill/Flatten] command because of a problem with the filter module interface."
I use Photoshop CS6 Extended with the Creative Cloud membership, and just recently updated to version 13.1.1 x64. I believe this may be related, as the plugins worked before the update and nothing else has changed.
Im makin this home page graphic...and im using a few PS filters. Is ther a way u can put a filter in a new layer on a transparent background so that u can edit it....(emboss....distort it?)
View 3 Replies View RelatedI'm working on a Logo for my college projest right now and was wanting to put some texture into it, so I tabbed into Filter tab and it wont allow me to click on "Texture", nor will it let me use "Artistic", Brush Strokes" or "Sketch"...
View 1 Replies View Relatedwhen i go to photoshop filters ;my screen of the filtersis to big it doesn't fit on my screen neither the settings numbers,
View 3 Replies View RelatedI need to know how i can use all filters when working with a rastarized layer in Photoshop CS2.
Often it's only very limited selected filters i can use!