Photoshop :: Wacom Mouse And CS4 Incompatibilities
May 9, 2009
I'm a CS3 user, but just downloaded CS4 for trial. Unfortunately based on my experience so far it's unuseable. The problem is that Clone, Healing, Brush tools do not respond to my Wacom Mouse (I can move brushes around, but can not apply any corrections).
 If I use the Wacom pen, it works fine. I've seen a few posting on the Internet from others with the same problem, but can't see any solutions identified. I have Vista Ultimate 64, Intuos Tablet/Pen/Mouse, 8GB Memory and latest tablet drivers.
I am 65 yrs young and use the Lasso Tool,Polygonal and Magnetic tools with a mouse.I just cannot control the outline area definition as precise as shown in all the tutorials. The "walking ants" are always screwed up and all over the place! Also, holding down the mouse button and scrolling the track ball is very hard for my hands. Â Will a Wacon tablet w/pencil provide a better manipulation of PS(CS5&6) functions for outlining areas to be modified?
When I start Photoshop my mouse works fine. Then I use the wacom pen of my clintiq hd that works also fine. But using the mouse again, the mouse clicks got a on second delay now. After restarting photoshop the mouse works normal again til I use the wacom pen. One use, and the mouse function is damaged. Â Mouse and Pen work best together in other programs like Paint or InDesin. This one second delay of mouse clicks is a Photoshop-Cloud problem. I did not have it in CS3 Â I deactivated openGL, installed the newest wacom driver, installed the newest graphic card driver.... The whole System is new setted up with Win7.... Nothing worked. It is a Photoshop-Cloud-bug!
Is there a way to set Photoshop back to the start without restarting it? It would be useful to do it with one Click, when I need the mouse after using the wacom pen.
I get a LOT of Photoshop CC (64 or 32bit) mouse lag. I do NOT have a wacom tablet or driver (I've searched these forums for solutions). All the other Adobe products work fine.
I own a Wacom tablet and I've used it for about a year now.. and now that I mostly use my Laptop, I use the wacom tablet as a mouse pad (using the mouse that comes with it). I opened up photoshop today on my laptop and I was trying to erase some things using the brush command and it didn't work.. after an hour of panic and googleing I had the idea of using the pen.. which works.
I've deleted preferences, reset tools, and everything.. but its not working. No brush commands work (Clone, Brush, Eraser, etc.) but everything else will work.
I don't get it.. Is it something with pressure maybe?
Thats the only difference between mouse and pen.. pen adds pressure sensitivity.
I can't use the pen for pixel editing as well as I can use a mouse.
When I move my mouse over the drawing area, the brush simply freezes at the corner next to the rulers, the regular cursor continues to move and I can click on the buttons, tools and menu, but my mouse is not functioning in the workspace, I can use my wacom tablet fine, but I still need my mouse to be functional for lassoo tools etc.
It is a very recent install, I may have some how buggered the mouse input when configuring my wacom.
I'm looking to get a wacom tablet, but I'm not really sure what tablet it best for digital art and animation type stuff. I'll be using it with Photoshop CS6 and probably Toon Boom or some other animation software. I'm just not sure what the difference is between the tablets.
how to turn off the mouse function when the mouse cursor moves over a feature, such as an edge, point, or surface, and highlights it. I don't want it highlighting the features automatically. I want it to highlight once I click over a feature. My colleagues and I are very distraught by this feature, and will be discontinuing our use of your products that do not allow us to turn this feature off. I'm not sure why you'd want to weed your customer base like this, assuming that I can't turn this option off from the research I've done pouring through the hundreds of complaints related to this issue. I haven't been able to find any posts recently, or regarding Inventor 2013 specificially on this issue, so I was hoping this version had the option of turning it off. Does any of Autodesk's software, such as AutoCAD, have the option of turning it off?
I followed the tutorial on this page: [URL]. However, my animation auto plays and mousing over has no effect. I have searched and sreached to no understandable (to me) avail. Here's a link to the file: [URL]
I just got my wacom intuos A5 USB a couple of days back and its working perfectly on my mac. No issues at all but I tried using it on my desktop and im having 2 major issues. 1. I have only "other dynamics" checked and opacity controlled by pen pressure. If i am making light strokes with the pen i get a few low opacity strokes is i should but I suddenly get a full pressure (100% opacity) stroke even though im hardly applying and pressure. These are sudden pressure spikes and are completely random. 2. The pen tilt is not working. I set color dynamics to pen tilt but the color doesn't change as i tilt the pen All this works perfectly on my mac so I know theres nothing wrong with the tablet but how do I solve these issues. Im hoping someone here will help me out. P.S. - I have an Intel 2.5 Quad Core, gigabite Mother board, 4gb ram, nvidia GeForce 6600GT - 256mb. I also have a beetel router connected to my desktop.
which is better, the intous tablet or the graphire tablet? judging from the price, i guess intous would be better, but i want to hear from people who have actually used them. also, can you use them with photoshop?
I am on the creative cloud and have down loaded and successfully installed PS6. I am a professional illustrator and use the Wacom tablet. My concern is with the pen pressure effect not staying on. I have went to option on PS6 and checked for updates and down loaded them with no results and called support as well .
I went to the Wacom sit as well to check to if my drivers are updated and they are, and called their support as well with no results. I understand that PS6 is a new product and that I may have to wait for patches, that is fine.
I need some input on buying a Tablet, I am looking at the Graphire2 and the Intuos2, I understand that the Intuos2 is better but does the Graphire2 work good with photoshop?
I have a chance to get a small Wacom tablet, its a older version ,screen size 4x5, It comes with all the software, Also has Elements 2.0 My question is,can I also use it with CS3?
I was using a wacom tablet in adobe cs3 just fine, now I get no tip sensitivity. As in, the pen will always draw a think line no matter how light I use the pen.
I apologize if this is posted in the wrong forum, but it seems to apply to techniques, so...I'm looking at Wacom tablets and hoping to buy one soon. My primary use would be for digital painting in Photoshop and the 6x8 size seems to be about right. Can anyone make any suggestions about whether I should go with Intuos or Graphire? I'm leaning toward the Intuos3 6x8, but that can get a bit pricey, even with academic discounts.
So I guess I have two questions. a) Does the Graphire series have what it takes to allow high-quality digital painting? b) Is there some way to find tablets for a lower price (I qualify for most academic discounts)?
I can't get pen tilt working in Photoshop CS4. If I choose pen tilt option in brush shape for shape dynamics it works as if the control would be set to pen pressure sensitivity. Diagnostics in driver options show tilt is detected. Tilt only works for angle control in CS4. And I'm using the latest update for CS4. In spite of this, i tried my intuos4 in corel sketchpad and it works great, just as expected. It detects pressure, tilt angle and tilt direction. I don't know what could be the problem. Can someone confirm having tilt working in CS4?I'd like to use tilt for roundness control.
I use my Wacom Saphire CTE 430 for all my software. Recently I decided to move from Corel PhotoPaint to CS3. However, I am experiencing a very strange problem. If I use the mouse none of the photo shop paint tools work. If I use the pen the paint tools work but others do not. At first I thought is was my ignorance of PS and that I just needed to configure something. I eventually discovered that if I disconnect the tablet Photoshop works fine. I have downloaded and installed the latest Wacom Vista drivers as suggested by Wacom but it has not fixed the problem. PS is the ONLY program experiencing problems with the tablet. I run AutoCad 2008, Sketchup Pro and CorelDRAW X3 suite and they work flawlessly.
I'm currently using Adobe Photoshop CS3 on Windows XP with an Wacom Intuos 3 tablet.
The problem I'm having is that when I use the tablet pen to click anywhere in Photoshop, the cursor essentially locks in place and does not move. On the canvas, this means I can only place dots. This happens whether I'm clicking on tools, scrollbars, etc...
I used to be able to use it fine in CS2, but then it stopped working on day, and I thought that maybe upgrading would solve the issue. However, this has just left me with the same issue.
The pen does work normally in all other programs, such as in MS Paint or when clicking and dragging to select icons on the desktop. Also, clicking and dragging with a mouse works normally.
I'm using CS2 and a Wacom pressure sensitive graphics tablet that's about ten years old. I've noticed that the pen's pressure sensitivity only works on brushes that have a hardness control slider. I would love to use the smudge tool with certain brushes but I can't because most of the brush shapes don't have pressure sensitivity with the Wacom pen, Is this normal? Is there any way to get all my brushes to have pressure sensitivity with my Wacom pen?
I just got a wcom bamboo capture and I'm trying to use it with photoshop 5 and when i try to draw with the tablet it only draws straight lines. When I draw on the laptop touch pad it'll do any curved line i want.
The tablet recognizes that im moving the pen in a curved motion but no matter whati do it only produces straight lines.
Using Wacom Bamboo CTL-460 on my i Mac and have noticed strange Photoshop CC (and CS6) behavior since the first beta of OSX 10.9 Mavericks. After a couple of actions with brushes, colors, moving layers and zooming in/out, my PS gets stuck. It shows brush tool, which can move, but I can do nothing till I switch to another app and then get back to PS. Shortcuts don't wort either.
There are some messages on Adobe forums about PS shortcuts not working properly on 10.9. I thought it might be a bug in OS with it's all-new memory processing, correlating with PS engine somehow, until I plugged my mouse in... everything worked just fine with it! Double-checked this on i Mac and Mac Book Pro: all the same on both machines. Â So Wacom driver is definitely causing the issue. The latest driver update does not solve it.
50% of time I do this the style menu come up instead. Â With mouse, no problem, with Wacom pen, this happens. Â I don't see a right click option to change a layer name, maybe I don't see it?
I recently became a subscriber to the creative cloud as well as recently getting a wacom intuos 5. The problem is, my new photoshop cc, does not show that I have a pressure sensitve tablet.
Is there a new driver from adobe that I need to install? I checked the Wacom site and as far as I can tell I have the newest driver available. Also, I do have photoshop cs5.5 could these two versions of photoshop be causing a problem when it comes to the tablet?
Whilst drawing in either photshop or SAI, the pen pressure sensitivity would just randomly fail and draw solid thick lines as if drawn with the mouse.See image:
What I also learned, is that once the pressure sensitivity falls out, it doesn't recover until I lift the pen away from the tablet, and then back again, as seen in the following pic:Sometimes it would fail on the 2nd brush stroke, others on the 100th. It's completely random. Â What I have tried to fix the problem: Â Complete removal of drivers and Bamboo dock, then fresh install from the bundled disc. Complete removal of drivers and Bamboo dock, then fresh installation from the lates driver download (PenTablet_532-1) Updated nVidia drivers. Updated motherboard drivers. Tried differnet USB ports.
I have Wacom Bamboo Fun with latest drivers, use Vista 64 and run PS in 64bit mode. I uninstalled CS3 before installing CS4. The tablet worked in CS3 as expected, but CS4 ignored pen pressure - it always worked like mouse - with maximum pressure. In order to fix this problem I uninstalled and reinstalled Wacom drivers and cleared PS preferences by starting PS with Alt-Ctrl-Shift. Now Photoshop ignores the tablet completely - the cursor won't move and I need to use mouse to navigate in Photoshop.
I am starting to have system instability....BSOD 0x00000024 / 0x0000001E, warm boots before the login screen, and weird behavior like the NTFS file system not working ( causing corrupt saves ), superfetch shutting down, Photoshop minimizing - maximising then windows shutting down........Odd
A virus is not out of the question but before I reformat etc I was wondering if the Beta Wacom drivers has caused any issues on other systems. Looking at the reliability records the graph is pointing downward exactly at and after the date I installed the drivers.
Just troubleshooting....
OS Vista Ultimate x64 SP1 CPU intel q9650 3ghz Motherboard Asus p5q deluxe Memory 16gb (4x4gb) OCZ PC6400 C5 Graphics Card Nvidia 8800GTS 640mb Sound Card on board Monitor(s) Displays Eizo CG301w, Dell 2407 Screen Resolution 2560 x 1600 + 1920 x1200 Keyboard apple slim aluminum jobbie Mouse intellimouse PSU ocz 600w Case coolermaster stacker Cooling many fans Hard Drives Raptor 74gb, Raptor 150gb, 500gb x2, 320gb. Other Info Wacom A3 tablet, Epson 3800
