Photoshop :: Using Photomerge Without Mixing Colors?
Dec 21, 2005
I would like to use photomerge to blend two pictures together. The only thing is, when I put them together, the colours mix, which I do not want to do. Basically, there is a red image and a blue image that I would like to join together, where in between them, there is a gradual change of colour. Is there a way of doing this?
I am pretty sure that I am using the wrong method of doing it, and that there is an easier way of doing it. could someone please enlighten me on this?
View 6 Replies
ADVERTISEMENT
Apr 12, 2013
How to mix colors in Photoshop like you would mix colors in real life to get that "in between" look. I have tried smudging and blending options but could not find anything. Here are some pictures of what I am looking for.
View 8 Replies
View Related
Oct 31, 2013
What I'd like to do [in photoshop] is treat 4 pantone colors just like CMYK channels. What I mean by that is that I would like to replace Cyan, Magenta, Yellow and Black with my own colors [pantone colors] and have them mix and act exactly like those channels. As in, when I open a full color image, and my pantone [or any color] channels or color profile is active, the full color image will react to those colors [with the blending of the colors].
Instead of 45% Cyan, 55% Magenta, 83% Yellow, and 2% Black in a given spot, it would be a mix of the 4 chosen colors [example: 45% pantone A, 55% Pantone B, 83% Pantone C, 2% Pantone D].
or to put it another way, if I were to color the background in, say, a blue, I would be able to use the "Info" panel to see how much of each pantone color was mixed to create that color. Obviously there would be a limit to the colors I could create based on the pantone colors I select.
I don't want to do anything printing wise with this technique. I am looking at it solely as an on screen viewer or perhaps use it in some manner for screen printing.
View 6 Replies
View Related
Oct 4, 2012
Is there a way to mix an off-white color to a green color? I'm not referring to adjusting the brightness and adding white, I'm referring to taking a green and adding some other custom off white color?
View 3 Replies
View Related
Mar 27, 2012
I've tried looking this up but just get the mixer brush on every hit or. What I want to do is to take two colours, use the colour picker and mix the two colours to make a third.
I know I can arbitrarily change the opacity or by steps with the number keys but I don't to do it this way. I don't want to use a blur too or a filter. This is mixing colours basics. The mixer brush looks like it mimcs painting in one respect but its also creating muddy values.
View 4 Replies
View Related
Jan 25, 2008
how to mix images as in the below header?
In the header they mix image with yellow background.
how to make this type of effect?
View 1 Replies
View Related
Aug 4, 2004
I want to know how you can mix colors in PS6.
I have sampled 2colors from an image one greyish and other earth color .
I want to mix these 2 colors so that with the result color I can paint on a new layer?
View 2 Replies
View Related
Sep 26, 2007
II want to ask information how to mix 2 different color to make one color.
For example like mixing two paints, yellow and blue, whether you put yellow first or blue first, the results is the same green. You put white and black, the result is gray.
But from what I try in Photoshop, mixing yellow and blue in different layers, produce different green, depends on which is latter.
View 9 Replies
View Related
Nov 12, 2003
how images are mixed together.
View 1 Replies
View Related
Sep 17, 2002
I have 2 pictures wich i want to put in one new picture. I want them to fade into eachother. So left is one picture and right is the other. I want a fadeline in the middle, but not vertically, but diagonally.
View 4 Replies
View Related
Feb 20, 2004
I want to create cd covers by mixing images from different photos. Collage if you will.
I found a tutorial that describes the selection process and so forth. I also read something about how Image Ready makes it easier to cut up pictures for rearranging. How so?
Also I wonder if I can use photoshop to make images appear "ghostly". Like the ghosts in the Haunted House film. Or the librarian ghost in Ghostbusters.
View 4 Replies
View Related
Aug 21, 2009
We would like to experiment mixing a spot colour in a normal CMYK image in order to expand the colour palette. Our problem is the fact that we cannot get Photoshop to show us the actual image once we have added the spot colour.
The spot channel shows as if it is being printed on top of the CMYK colours instead of being mixed with them. This makes it very difficult to judge what adjustments have to be made to the image. Of course, saving the file as a DCS2 and placing it in InDesign shows us what we want, but this is too much jumping back and forth between programmes to be efficient. We are runnnig CS3 on Windows XP Professional.
View 4 Replies
View Related
Aug 17, 2008
would like to use it to start making my pics stand out more. My first experiment is to make a colour pic into black and white, THEN bring back the original colours in certain parts of the pic. ie i have a pic of an old steam train, and i want to leave the surroundings in colour, but turn the steam train in the picture to black and white. I have been advised on less photoshop specific forums, to turn the whole pic to B&W, then use the history brush to bring back the colour to the parts of the pic i want to be in colour.
View 6 Replies
View Related
Aug 31, 2006
I was trying to make a signature with cool effects mixing filters, adding layers, gradients, etc. only thing i know to do is mix filters and add gradients.
I wanna have your opinions about my signature, and some tips on how to get better and better working on photoshop.
View 1 Replies
View Related
Mar 19, 2014
I have two Sony full HD camcorders: my new one will do 50p whilst my old one with only do 50i (UK Pal for info). Just wondering, if you were doing a multi-camera project would you film in 50i and 50p or both in 50i?
Also, what are the ramifications of editing mixed formats? I'm using Premiere Pro CS6.
View 4 Replies
View Related
Jan 12, 2013
I created a DVD with is made of video and and a slideshow. The slideshow works fine within VideoStudio but once burnt on the DVD it does not work, the music plays on a black screen. The rest of the footage works fine, what could have happened?
View 2 Replies
View Related
May 4, 2012
I have a project that was filmed in DVCAM and captured as an AVI file. I want to mix in some footage that was filmed in HDV, on the same camera. Presumably I can capture it as an AVI too and just add it to the project? The project is:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
View 1 Replies
View Related
Mar 27, 2013
I have video files of the same performance from two cameras, and want to cut and match between the two. In the past what I've done is lay the firstone on the main timeline and then cropped where necessary to allow cutting to the overlays in tracks 2 and/or 3 as needed. This however proves to be rather time consuming and occasionally I get timing issues.
is there a facility in VS X4 to lay both tracks side by side (losing the audio from one of them) and then block out sections as required by (eg) making the overlay transparent, and thus keep the timing the same all through a piece...?
View 1 Replies
View Related
Jun 27, 2011
I had a time where I shot some home videos on my old Sony DV camera (type2 DV 29.97fps) and also some on my other digital cameras of various models which recorded in mjpeg (20fps), h.263(30fps), mpeg4sp (29.97fps), and even a few .asp. I want to combine all these in chronological order on DVD. But I worried about which format to choose when rendering such a mixture, since I've heard that type 2 DV should be lower filed first. Will that mess up the way the other files are rendered? I was wondering if i should render the DV out to DVD compliant mpeg2 first and then add in the others in another project.
View 2 Replies
View Related
Jul 13, 2012
When I split audio and then create the sound file, that file and the audio in project also lost.
I can add audio file normally but when I mix many clips, I just can hear sound whenever I choose the clip only. If I choose the whole project, the sound will be lost although the background sound still exist.
When I replace X5 by X4, there is no problem. But I prefer X5,
View 5 Replies
View Related
Mar 5, 2013
Is it possible to link / reference data from other drawings via labels? For instance, if I have a pipe network from a utility file and reference to a grading file. Could I add labels in that grading file that are from the utility drawing?
I want the pipe diameter minus the surface and maybe list an area of a parcel in one label?So I guess if you can take parts of the Civil 3D objects and tie that back to a general label type.
View 1 Replies
View Related
Jan 21, 2013
I have a question relating to the Pantone standard color that I will obtain if I mix the following paints together:
1. 9.5 oz of Pantone Black C
2. 15.875 oz of Opaque White ( I know there is no pantone standard for white)
I will need to specify that derived Pantone Color for a gloss vinyl paint that we would use to silkscreen and pad print information on ABS or PC injection molded plastic parts.
View 1 Replies
View Related
Aug 20, 2013
Here is the background.
A "MODEL" drawing exists that contains only the surface model. The surface model is data referenced into a "LABEL" drawing that contains the surface style (contours), contour labels, and spot elevations. This "LABEL" drawing is xref-ed into a "SHEET" drawing that contains the title block and some other xrefs containing the proposed layout, ex cond, etc..
When I open the "LABELS" drawing, the data reference works. My problem is that when I open the "SHEET" drawing, the contour labels and spot elevations cannot find the referenced surface and just contain a string of 20 or so characters.
I already have a workaround. If I open the "SHEET" drawing, then open the "LABELS" drawing and save it, I can reload the "LABELS" drawing within the "SHEET" drawing and the problem is solved.
HOWEVER, I have a bunch of sheets that I want to publish, and publish does not work when you have to open the file and re-reference everything. Is there anyway to get this reference working correctly so that I do not have to open multiple drawings to get my data correct?
FYI, I have already tried resetting my data shortcuts project folder, validating data shortcuts, etc. in the "LABELS" and "SHEET" drawings.
Civil 3D 2012, SP 2.1
View 2 Replies
View Related
Oct 16, 2011
Why not allow paint.net to have the feature of blending pictures in order to create motion blur as it is was in 3d space.
View 2 Replies
View Related
Jun 28, 2012
I recently installed CS5 on my laptop after first removing it from my previous machine.All licences were validated so no problems there.Now when using paint bucket in Photoshop, the colors that I select in the color picker are not the colors that result when I use the paint bucket.
If I create a new black canvas then the colors selected in color picker work with paint bucket.But if I attempt to recolor the background in an existing image that I import into Photoshop, I get the mismatch with colors when I use paint bucket. My method for selecting colors is the same in each case, I select 'set foreground color' and set the color using html values entry at the bottom of the panel.
View 11 Replies
View Related
Jul 7, 2013
Just wanted to print a new photo and realized that the colors in print preview do not match the colors in soft proofing. In both cases I selected the same icc profile and rendering method. The print colors matched the colors in print preview. I never had a problem so far. All new prints will be checked with soft proofing and adjusted when necessary. I never paid attention to the color rendition in print preview and all prints perfectly matched the colors from the soft proofing. I was surprised when my print came out of the printer and the colors weren't matching the soft proofing colors, but that of the print preview.
I don't understand why Photoshop renders the colors differently in the first place. See attached screenshot for the difference in the blue/cyan colors. I don't care if the print view colors will match the print, but I do care when soft proofing is not working.
View 2 Replies
View Related
Nov 9, 2008
I took a series of photos (9 shot vertically) of the lobby of AKL. I made adjustments in Bridge (3.0.0.464) then choose Photomerge through tools in Bridge to process the pano in CS4 (11.0). The images were processed for the natural light. Follow the link to see what CS4 came up with. The files were .dng processed with CS3. I have made many other photomerges using this combo, but this is first to achieve this type of result. In CS4, I used the vignette and distortion options.
View 18 Replies
View Related
Nov 18, 2008
I'm using Photoshop on Vista 32. When I try to do a photomerge either from PS or Bridge, it does its stuff, then closes everything immediately. Reboots / changed options make no difference.
View 17 Replies
View Related
Feb 1, 2009
When i run a Photomerge (using jpegs) i have even tried using the sample jpegs that come with the software of the SF skyline.
I select my images, and it runs the usual sequence of starting the layers and merging then when it ends its just dissappears looking like the software has just opend with nothing happening.
Ive tried every combination to make them work and nothing.
i never get to see any results.
I am using CS4, and ive also tried in CS3 again which is still installed on my partition. and its not working in that either. it used to work with no problems bit not now.
View 15 Replies
View Related
Feb 17, 2009
Just created a panorama out of 4 jpegs (together about 33MB) and saved it as jpeg.
Now I want to create another panorama out of 10 jpegs (together about 73MB), it worked fine, but I can't save it in jpg format. CS3 only offers .psb, raw or tif.
View 3 Replies
View Related
