I'm trying to find a way to incorporate a brush into my action without actually having to stop and using the brush and then continue. More specifically, I would like to apply the art history to the entire image as a step within an action, but I want it to automatically be applied without me having to actually brush it.
Could anyone advise me if it is possible, and if so how to create an action with a brush.
I've created a brush which is just my copyright information that I want to stamp in the bottom left of every photograph when it is converted to a JPEG.
My convert to JPEG action works fine, but I can't seem to record an action that uses the brush.
I'm trying to record a brush mode setting (eg clear,normal, behind) in an action.
But photoshop doesn't record anything when i click on the brush mode setting (it does record the brush when i click on it in the tool bar) Tools like the color picker also do not record, so the problem goed farther then just the brush mode setting.
I'm running Photoshop CC on a Wacom Cintiq Companion on Windows8.
What I would like to do is to get the stroke shape, pressure and maybe velocity after a `Brush Tool' drawing action is triggered by the user, i.e. after a simple drawing operation.
I have been using the ScriptListener plugin, but it does not record this type of operation: changing the brush parameters (e.g. size and opacity), yes, but the actual drawing action, no.
PSPx5. Tools. Smudge Brush. Size 40. Doesn't matter what size. Hardness 100. Doesn't matter hardness setting. Step 1. Density and Thickness 100. Rotation 0. Opacity.
Here's my problem. If I set it to 71 or below nothing happens. If I set it to 72 or higher I get a big smudge. I can't get an opaque smudge. 72 I get nothing and at 73 I get a lot of smudge. I can go with a higher setting ok but I can't get anything below 72.I can play with density but that' gives a different result. Not what I want.
you can see what i mean in the following picture examples.
Selecting a brush (any 1 pixel) brush
[URL]........
shows my selection . Drawing a straight line
[URL]........
Zooming in to the line (600%) you can see i can draw a marquee through half of it ...
[URL].........
No matter what 1 single pixel brush i use this will happen... no matter which computer i use cs6 on and different copies of the installation. Anyway have any insight into this? frankly... it's somewhat limiting that i can't use the brush for stroking a shape if i need a pixel line and yet soft curves that a pencil won't get you.
I'm a web developer but have little knowledge of Photoshop. I got a web design job to create something very similar to URL.... Firstly i want to know how to make a brush mild like the white brush on that website. It doesn't overshadow the blue background.
There are a few things I just don't get about brush settings. Sometimes it seems my brushes go all wonky.
When I change the settings for 1 brush... say I add some jitter to a smooth brush - then suddenly the other brushes get the same jitter applied to them.
How can I set the brushes so that each brush has a different setting that doesn't change when I change any other brush settings?
p.s. I also don't get why Adobe has you lock a brush by UNlocking it? Seems to me it should be the other way around?
I have contacted Adobe about issues with Photoshop brushes recently. My issue is that the brush size is smaller than the circle that represents the brush. In other words, when I hoover over the area that I want to paint or erase with the circle and then click, the painted or erased area is smaller that the circle. It's really frustrating when fine tuning an image, you never know how close you are to what you want to correct. This is only visible when you zoom in quit a bit. I worked with an Adobe tech for over an hour and he could not simulate the problem. Then he finally asked if I was using a retina display, (he was not).
the brush, stamp brush and eraser tools are giving me a hard time the actual working area from the tool is so much smaller than the outside frame of it URL....
i'm using cs6.the picture i'm working with was enlarged to 400%.the brush, stamp brush tool was at size: 12px, hardness 100%.opacity 100%
in the presettings i saw the brush was set to normal size.also i played with the jitter sizes, to no avail.
i am trying to build an action where the end product is a channel listing that has all the channel (R-G-B-L-C-Y-M-K (forget LAB a-b)). this will allow me to look at all the channels for contrast and subsequent extraction. i'm actually able to do this as i RECORD the action. but when i RUN the action, nothing happens.
in recording the action, i create a DUPLICATE IMAGE, then convert the new image to LAB. i then drag the "L" channel to the original image. it goes into the original image as an alpha channel which i rename to "Lightness." i then convert the duplicate image to CMYK and then one-by-one DRAG the individual channels to the original image. at the end of this process, i have all eight channels visible in the channels palette. this is what i want.
but then, when i RUN the action on a new image, the action fails to RECORD the "drag step and drop" step. the "L," "C," etc. channels are not dragged during the running of the action.
I tried defining a new brush but the sample doesn't recognize color and texture. Is there a way of sampling a small piece of a drawing and making a brush out of it? With the multi colors of the sample?
needs to overlay a grid over a photo and then save it as another file. In CS5.5 or earlier, no problem, but in CS6 it is not working for either of us.
The batch action (run from either Photoshop or Bridge) stops and prompts at the Save command every time no matter what format we save it in (psd, png, jpg, save for web, etc.).
I have been through the Web and the Adobe Forums and cannot find a work around for this. He cannot just hit enter everytime the popup window comes up because he has over 2700 photos to put this grid on.
When I use the healing brush is tends to "skip". It leaves a line of circles like a stamp would instead of a flowing line like it should leave. No matter how slow I move the brush it leaves a circle and then as I continue to draw nothing happens until I reach the edge of the first circle, it then drops another circle and it continues that way as long as I draw with it. The brush tool works fine, leaves a smooth line. The Spot Healing and Patch Tool work fine but the healing brush will not heal in a smooth stroke. It skips along a leaves a tail of circles the size of the brush. I am using a fast computer, i7 processor, 16bg ram and a SSD drive so I do not think speed is an issue. I upgraded from CS4 where the healing brush worked fine on this computer
Hi, I'm having some issues with my brush. It won't brush any other color, I select different colors on "set foreground" and "set background" colors and no matter what I select it brushes white. Does anyone know why?
Is there any way to add a favorite brush stroke to the list of brush strokes, or do you always have to open the original file to access the brush stroke?
I'm using a tablet with gimp and I want to be able to set the brush size for the paint brush and also for the eraser, separately. What happens now is that I'll set the paintbrush size to 10px, paint for a little while, turn the pen over to erase and the eraser will now be at 10px. So I'll adjust the eraser size to something like 50px, erase, turn over, and now the paintbrush is at 50px. Grrrrrrr... I tried creating new brushes for both the paintbrush and the eraser, but there's no brush size option. This is my first time using gimp so I'm probably missing something.
I'm having a problem with the Blob Brush tool where I can't change the basic brush to something else. Whenever I pick a brush I want and I try draw with the Blob Brush tool, the brush I picked reverts back to the basic brush. Here are screenshots:
I pick a brush that I like first
But when I start drawing with the Blob Brush tool, it reverts back to the basic brush automatically
Am I doing something wrong or is the Blob Brush tool only capable of using the basic brush?
I recently upgraded my computer to Windows 7 (32 bit) and installed CS5 on it. Everything seems to be fine, but using my wacom intuos 3 tablet i found that when making curved brush strokes every so often it came out as a straight line, the straight line being where i start and finish the curve (see pic below. The S stroke is what should happen. The straight line is what happens every so often with the same motion).
At first i thought it was the tablet and reinstalled the drivers to no effect. Since then i've discovered that the same thing occurs with the mouse. The problem occurs once every five or so strokes (i'm doing digital art, so there's a lot of strokes). It never happens if i do a stroke slowly, but will almost always happen if i do a fast stroke.
Testing other painting programs i've found them all to be fine (i grabbed trials of open Canvas, Sai and Gimp and had no such issues). However, getting out my old copy of CS2, i found it had the same problem. The problem does appear to be Photoshop + my computer based. I've since reinstalled them both but had no success there either. (My computer is a intel i3 btw with 8gb of ram, so i wouldn't believe it to be a performance issue)
From the Brush Presets Panel, I choose Basic Brushes from the drop down menu. Then Replace. The new choice of brushes appear in the Brush Panel and in the Brush Presets Panel.
But in the Brush Panel, additional brushes appear.
There are always more brushes in the Brush Panel than the Brush Presets Panel whenever I Replace. The Brushes Preset Manager is populated with identical brushes as the Brush Presets Panel. What determines the additional brushes that appear in the Brush Panel?
I'm comparing the CS5 & CS6 mixer brush, with moist, light mix, right now...At first I wondered why the CS6 mixer brush was slower, until I realized that it looks like the actual brush stroke in CS6 is more advanced. The CS6 stroke looks like it's calculating the overlapping brush strokes & it's interaction with the texture more accurately to real life.
I haven't read any articles on improvements to the CS6 mixer brush. Has it actually improved or are my settings just different in CS6 from CS5? since I'll probably need to work with "Sample All Layers" unchecked when working with the CS6 mixer brush.
I have downloaded a free page curl action for Photoshop CS5. Is there an easy way to run it without all the steps i.e. with one click if my image size is constant?