On CS6, Windows 7, when I have a transform box around a selected area and place the cursor on an anchor point and hold down the control key down, the anchor can be dragged about without moving any other anchor points... i.e. the box can be changed from a rectangle to whatever.
However, in CS6, the movements snap to something even though I have all snaps turned off. How to stop the unknown snapping?
I have supposedly disabled all the "snap" features in Photoshop, however, whenever I try to make minute transforms with the skew tool it always "snaps" (often closing a huge gap) to either it's previous vector, or one of the other points.
How do I stop this before I hit my head on the desk repeatedly in frustration?
Ctrl, etc., like with the move tool, does nothing differently.
It seems that in CC the Free Transform tool does not snap to grid when resizing (for example) a rectangle. If I have "Snap to Grid" turned on, it only is taking effect with new objects getting drawn. Am I understanding this correctly? If I draw a rectangle, and want to reshape/resize it to fit the grid, how do I do this? It's a bit embarrassing asking this question, but CC seems to have changed some things from CS6.
View 14 Replies View RelatedI just noticed there are two various of Text Transform. I have screen shot the them. First one is "text size changes when corner is dragged". However the second one is size remains unchanged when it is dragged.how to create the first one.
View 3 Replies View RelatedI have the latest updates for Adobe Photoshop CC. Using the advanced blur filters, such as Tilt Shift do not show any adjustment anchors. If I am lucky enough to run my mouse cursor over them, I get a changed mouse cursor to indicate I came move them. but the references lines, anchor points...nothing is visible to show me where to make the changes or boundaries for such adjustments. I had hoped this bug would be fixed, but apparently not. I am unable to find any other references to it on the forums so maybe it is just me.
I can run my old Photoshop CS6 and they show up just fine. to how to fix this?
How i get all anchors in drawing using VB.NET?
View 3 Replies View RelatedToday, the anchors are not showing when using the direct selection tool. I can only scale and rotate using the menu selections. How do I get the anchors back? I can move the object but that is all. I am not aware of what I did to change this.
View 2 Replies View RelatedIs there any way that can add or make the line tool to have 5 or 6 anchors in it..??
Attached Thumbnails
Instead of forcing users to download and instal external plugins in order to accomplish this, why dont you instead make your insanely expensive software do what it is supposed to? Thats my question. You charge enough for it, and that is an insanely obviouse piece of functionality that should be available.
View 3 Replies View RelatedLevel: Newbie OS: Windows 7 64bit Ia: Cs6
in short ...
I have made two objects, a vertical elongated ellipse with a circle placed on top that covers a bit of the ellipse and then i made a mask via Ctrl + 7
afterward I want to select the path of the circle and then use the Offset path twice to create two new paths but i want to Delete the first/original path.
however, no matter what i try i cannot seem to Delete the original path. ????
i have searched the manual, FAQ's and even used Google to try and find an answer.
I don't know if i am not asking the right question(s) or what but it seems as though a path cannot be deleted.
after doing ... say ... selecting the path in the layers panel and then clicking the trash can icon at the bottom of the layers palette the Edit menu will indeed say that the path has been deleted ... but ... when i hover over the area ~ the path is STILL there!!??
paths cannot be deleted? i would think if they could be that the manual would have some sort of info.
i find things like ... how to delete part of a path, how to delete anchors ... i mean everything but what i need to know.
I'm working on a logo and am having trouble erasing part of the path of a circle.
Here's what I did: I first made an elipse, then cut out a piece of it with scissors so that it looks more like a "C". Then I used the pen tool to draw an upside-down "v" intersecting with the circle. I am trying to erase a little bit of the top of the circle, to make it line up with the vertical line of the "v", but every time I try to use the eraser, it ends up drawing a line that connects the two end anchor points of the shape I just created.
Ps CS6
OSX 10.6.8
Problem: Transform applied to Smart Object fails to transform an attached Smart Filters Mask.
I mean a Transform, including Free Transform, as found in the Edit menu. A simple move by the Move Tool is OK.
A workaround until this bug is squashed is to encapsulate the Smart Object + Smart Filters + Filter Mask inside another Smart Object and transform that.However, that will not be a satisfactory solution in some cases. If a filter has size parameter(s), e.g. Gaussian Blur radius, a scaling or warping/distorting transform applied after the filter will obviously differ from the filter applied after the transform.
In any case, the workaround is inconvenient to subsequent editing and experimenting with filters and masks.
I am using a script to move anchor points on a path that I have. When I move the anchors, the handles remain in the same location and I am getting very poor results. I was wondering if there was a way to move handles WITH the anchor points. Basically keep them relative to the anchors.
Below is how I am moving the anchor. I know that you can use leftDirection and rightDirection to move the handles, but I would like them to move the same way they would if you moved the anchors when selecting them in Illustrator.
Set currentPoint = targetPathItem.PathPoints(13)
currentPoint.Anchor = Array(-1537.21, 2735.96)
Sometimes, i work with the Warp Mesh, and i need to make something with a smooth curve. I often end up with several lines following the curvy line i want but i would need to have them perfectly equidistant from one another. Is there a way to select s certain number of nodes and have them evenly space while the first and the last one stay as anchors?
View 2 Replies View RelatedUsing AutoCAD 2013 and TOL command to generate feature control frames. We set our lineweights based on layer assignments.
Problem is that when printing, AutoCAD seems to randomly assign a lineweight to the feature control frames. It can vary from what it's supposed to be (such as lineweight set for the dimension layer) or thicker than even what the object lines are set at. Seems to pick a random linewieght at time of printing for these elements (just the boxes, not the symbols/text itself).
Is there a setting we should be defining somewhere to force it to follow the lineweight of the layer that it has been assigned to? Known bug?
In illustrator, is there a way to reduce anchors points in a segment path without altering the path?
Is there a better and more efficient way to reduce anchors points than using the pen-minus tool?
If I put an outer stroke around an image, the guides won't snap to the edges of the stroke. Instead, the guides will snap to the edge of the image. How can I get the guides to snap to the edges of the stroke?
View 4 Replies View RelatedI have these small thumbnails on large white BG I need to crop out the white.
But when I crop, Ps does not snap to the edge of the thumbnails borders even though I have PS set to snap to layers and documents bounds.
I created a couple of psd files last night. A simple pricelist in photoshop and I developed a habit of saving every few minutes. I can't remember if I closed photoshop last night or not but when I woke up this morning, my pc had rebooted itself (re-started).
I open photoshop to start working on the files again and this icon appears but with the name that I saved my files as (8.5x11_pricelist) . I tried to open it in photoshop and I get the error: "Could not complete your request because it is not the right kind of document." I clicked on properties to see what is going on and it simply states 8.5x11_pricelist file and in the "open with" section it states: unknown.
I don't know what could've happened but I'm devistated. I've been working on this file for sometime now. get my file back?
I have some JPEG images, when I am trying to open these files , I am getting message "Cannot open this file unknown JPEG marker type found".
View 2 Replies View RelatedHow do I prevent files/photos from "snapping" together when I have multipul items open in photoshop CS6 at the same time and drag one close to another one. I work with a very messy screen and I like it that way. I HATE it when the 'snap' together.
View 2 Replies View RelatedI have a canvas which is 1680x1200 and i'm designing a website. I've added some guides around the canvas but here comes my problem. Everything i create which i want to snap to those guides - snaps ....
View 9 Replies View Relatedchange the default (permanent default from image to image) of snapping from off to on --
View 3 Replies View RelatedWhen adding a guide in CS2, it would usefully snap to the centre of the current layer. Sadly, cannot make this happen in CS3 except for text layers.
View 18 Replies View Relatedis there a way to turn off grid snapping with vector images? i have a point that is close to an edge and it keeps snapping to it when i try and move it. possible to turn it off?
View 1 Replies View RelatedI get an unknown graphics processor error when I try to use Oil Paint filter. I have been able to use this feature before and all my devices are up to date.
View 6 Replies View RelatedI'm working on an image to print onto t-shirts for our holiday.
When I upload it into vista print it says there has been a semi-transparent layer detected which may affect the quality of printing (as they are being printed on black t-shirts - they put a layer of white behind to ensure best print quality)
The problem is I can identify what the semi-transparent part is! I've checked all layers and they are set at 100% opacity.
Windows XP Pro
Adobe Photoshop CS3 Extended
Dell Latitude D810
i try to open Adobe Photoshop it gets through the loading screen and then comes up with this error message: "The exception unknown software exception (0xc06d007e) occurred in the application at location 0x7c812aeb" and it closes the program wether i hit "OK" or "CANCEL"
I have tried a number of different photoshop versions including CS2, and 7.0, and i have gotten the same error message every time. I have obviously tried installing and uninstalling. This error does not occur when i run my copy of Adobe Photoshop Premiere Pro 1.5
Just bought a mac and installed elements 4. When I open an image with finder I receive the following message:
Could not complete your request because an unknown or invalid JPEG marker type is found.
I can't just change the file format to .psd. I need to upload them to a website the requires .jpg format. I can't email them either.
I layout photos for albums and I just upgraded to CS4. Even though I have the snap to grids function selected my photos don't seem to be staying in line with the grid. I don't know what to do!
View 1 Replies View RelatedI would like to have my cursor snap TO guides at time but cannot find a way to make this happen. Is this an option in PS cs2?
View 2 Replies View Related