I have extracted some images in PS. I had to go Adjustments>Shadow/Highlight to be able to see the outline properly, as the background was too close in color to the actual photo.
Now, how do I get it back to the original? I mean, after extracting it and saving as a psd, is there a way you can undo the Shadow/Highlight?
I found this excellent tutorial on how to change shadows, etc. It included the ability to change the amount, the tonal width and the radius, BUT, I cannot find it in my PS 7.
Is this function not available in Photoshop 7?
I get very washed out images when I use this. What is the best way to correct it?give it more punch?
View 5 Replies View Relatedi'm trying to emulate the shadow and highlight on this apple icon:-
i am trying to create this shadow on text, so have tried the various drop shadows, inner and outer shadows, glows etc but to nothing resembling the shadow / highlights on this icon.
I have a copy of Photoshop and perhaps the most common tools I use is the Highlight/Shadow adjustment on a single photo. In it you can open (lighten) the shadows and tame (darken) the highlights. I'd expect to apply this control globally to a video clip, not a frame.
Does VSP have this feature?
I just upgraded to lightroom 4.1 and the highlight and shadow recovery sliders have disappeared. It now looks like me old version 2. What happened to the new sliders?
View 3 Replies View RelatedI've created a bevel, and I'm happy with the basics. Is there a way to adjust the color of the shadow and highlight? I can't seem to find anything.
View 2 Replies View RelatedThere's a gap between the edge of my tonal information and the end of the histogram box on both sides of the graph. No matter how bright or dark I make the image it does not show clipping and the values do not slide to the far edges of the box like they used to. Also, holding down option when dragging the 'whites' and 'blacks' sliders no longer shows me clipped values no matter how bright or dark I make it.
View 16 Replies View RelatedI just downloaded LR4 as a trial. Everything seemed to install just fine, but when I open LR4, the new whites highlights shadows blacks sliders instantly turn back to the old LR3 recovery fill light sliders....I see them for about 3 seconds and they change right before my eyes.
View 2 Replies View RelatedI have a family picture where two of my family members got too much light. I downloaded the sahdow / highlight plugin but I just can't get it to work as I want to. changing the highlight and shadow of only certain faces in a single picture?
View 1 Replies View RelatedI was using these tool on a lot of images, because they often seemed to vastly improve them, making the colors pop on otherwise somewhat dull ones, and getting rid of unwanted color casts..
Later though I noticed that it is often at the cost of burning out hightlights in some areas beyond salvation.I also find shadow /highlight sometimes does this also.
Then I tried to protect some small areas with a mask before proceeding, but it seems that I can't find information on just painting a mask, but only videos with much more complex adjustment such as the Russel Crow or Lynda ones with maintaing hair detail while superimposing images, which is way beyond what I need in these cases.
If I try the wand to select and inverse I get unnatural looking divisions. Is it a matter of feathering to the right extent?
I think it'd be so cool to be able to replay your entire undo history of a picture, so you can see and show others how you proceeded on a picture you made. That way, it's never necessary to capture screen video for like 10 hours and stuff..
So first you'd need to add an option to save the undo history (so that you always keep the history from when you started). Then you'd need an option to playback the undo history.
Is there a way to undo without zoom as part of the undo?
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
I have a problem understanding how undo marks are added to the undo stack.In the code below a fan of lines are draw in a random location.If you run MTest a few times, the AutoCAD Undo command will remove the fans one at a time.
If you run MMulti to draw 10 fans, the AutoCAD Undo command will remove all the fans in a single step.I want to be able to remove the fans one at a time.I thought that a StartTransaction / Commit pair would act as markers for the undo stack, but this isn't working.
Tested on AutoCAD 2010 VS 2008
<CommandMethod("MMult")> _
Sub testmult()
Dim i As Integer
For i = 1 To 10
Call testdraw()
Next
End Sub
[code]....
I don't know if this problem was already there in earlier 3ds max versions, but i cant find anywhere on the internet how to create a shadow on a invisible plane like matte shadow could :
View 2 Replies View RelatedIn this diagram the box was created with the rectangular marquee tool, one pixel in width, and was stroked. The arrow was created with the line tool.
As can be seen the box is not as sharp and definite as the arrow. Is there a way to make to box look the same as the arrow? I'm using PS7.
Im using Photoshop CS and whenever I highlight something in a picture using the patch tool or something else I dont know how to get rid of the highlighted area after Im done.
P.S Are there any good FREE Photoshop video tutorials on the net? Or is there anyone of you I could add to MSN messenger and ask for tips and tricks?
I'm using oldschool 7 version and I'm very happy with it for my little needs. I'm trying to make something that is probably very simple for an expert:
As you can see the corner is fading gradually into white... while shrinking also in width (passes from 2px to 1px width).
I am looking at an image that I'd like to color manage... it's a tif image. No choices are highlighted so I can' t choose anything... nothing under filter, select is highlighted..
View 4 Replies View RelatedI have a colour wedding photograph that I want to make black and white, but leave the confetti in colour.
View 2 Replies View Relatedhow to get make a "sparkling chrome highlight"?
View 2 Replies View RelatedI've made the switch from Photoshop v7 to Photoshop CS2 (yay), but theres this one very annoying little nuisance! In v7, i could try some things out and experiment with things, and if i was unsatisfied with the results, i would just pres Ctrl+Z a couple dozen times, and voila! Back to where I would experiment some more. However, in CS2, i can't find out how to set so that i can UNDO more than once. It just toggles between UNDO and REDO. Its just a minor annoyance, but it really bugs me. Is there a way to undo more than once (or a whole lot ) by pressing Ctrl+Z or another keyboard shortcut, or am i stuck to using the history window?
View 9 Replies View RelatedI have some images I'm tyring to see if they have been photoshopped , and if its possible to 'undo' the photoshopping to restore the original image?
View 2 Replies View RelatedIn CS 6, when I go to "File" > "Browse in Bridge" on the drop down menu, "Browse in Mini Bridge" is always highlighted in blue, along with "Import" and "Automate" and "Scripts". Other options including "Browse in Bridge" are available, but not highlighted in blue.
Is there any way to remove the highlight on these options, (but NOT remove the options) ?
how to get rid of the hightlight around a shape when it's selected. In cs4, if you selected a shape in the layer panel, it would highlight around the shape, but if you clicked the shape twice, the highlight would go away. The layer would still be selected, but it wouldnt have the dark line around the shape.
I do a ton of design with photoshop and whenver I try and drop the opacity on a 1px line, I can't see the difference b/c of the dark outline on the line since it's selected. I have to change the opacity, select another layer so I can actually see the line, then select the line again and rinse and repeat until I am satisfied.
on my Photoshop cs3 some of the selections are highlighted with blue as shown by this picture
Before a few days ago those were highlighted purple. Is there ANY way that I could change those colors to my own choice or is it something to do with Photoshop or maybe my system preferences?
I have photoshop CS, I can't undo more then one action!! Is there a way to Undo more then one step? All it's doing for me now is Undo, Redo, Undo, Redo... im usd to bein gable to just hit undo undo undo and say for example undo three lines I had drawn... How do I have multple undos?
View 9 Replies View RelatedIn CS that I've just installed (yes, new to PS the ctrl-z only undo's 1 step backwards, what can I do to enable it to undo multiple times? Coming from PSP, you could undo for hundreds of steps....
View 4 Replies View RelatedWhenever i make a mistake i press Ctrl+Z but it only go's back one step. I cant find the setting to change it so i can go back about 10 or 20 steps. Is there such a setting?
Also, can anybody give me advice about making a (Simple) mouth. I can only make straight line. I tried to curve them with the smudge tool but it looked awful.
Undo method, under the Edit menu. The Undo turns into Redo, and you have to use the Step Backward command if more than one undo is required. Even Ctrl Z is both an Undo and Redo if pressed consecutively. Image Ready doesn't work like this, nor do most other apps, including other Adobe programs. Just seems a strange approach, particularly as it appears only Photoshop uses this method (Although maybe it's changed since PS 7?).
View 3 Replies View RelatedThey used to have this option that makes it so pressing undo twice does not does not undo your last undo. I think it also sets redo to ctrl+y. For the life of me, I can't find this option anymore. Does anyone know where they moved it?
View 1 Replies View Related