I selected an object (a hand) using the magic wand tool and filled it in, black. I want to select everything else in the image (other then the hand I just filled in), and fill it in white. What is the bes way of going about this? Can I fill in the hand white, and so some kind of inverse of the image? (The background is of an office, so lots of different colors and objects).
View 4 Replies
How do you select an object with a complicated background. For instance if I want to select a pine tree in forest and the tree is in the foregrond and there are trees of the same color in the background, I have found it hard to select because of the similar colors...all of the tutorials I have seen all have a single color back ground ie a girl with hair and doing a refind edge is pretty straight forward....but how do you do that with a busy background..(for instance ) I want to select a pine tree with all of it componets and plant it in the middle of the desert.
View 4 Replies View RelatedI am having a problem with a delay in selecting an object and selecting a command.
When I select an object the pointer has at least a 3 second delay before it starts moving around normally again. It is the same with selecting a command. This has started to get tedious. It has worked fine in the past so I don't think it is a RAM/graphics card problem.
I was trying to select merley the bribe without this ugly bachground.My intention is to replace this background with something else. Can someone lit my way to do it fast and effective because I got like 20 pictures like that and it takes forever to select this background.
View 4 Replies View RelatedI edited a .jpeg in Photoshop, and removed the baground. I have a picture of a snowflake. It is on a blue rectangular background. I ONLY ant the snowflake in Publisher, so I edited the picture in Photoshop and now I have JUST the snowflake with softened edges in Photoshop. But when I go to paste it into Publishe, I always get an image with a white rectagular background, which defeats the purpose of the editing in the first place.. How do I get JUST the snowflake layer to paste into the flyer?
View 3 Replies View RelatedWhen I open a picture in photoshop, any picture, I see the picture and all around it is a background color. It has nothing to do with the picture or any work being done on the picture. This has to do with the color that comes up on the screen regardless of the picture. It was black and I hit something and it is now blue. I want this to go back to black.
I tryed clicking on the link below, selecting black for a background color and clicking and nothing changes.
I have a daughter who has curly hair and I'd like to select her from the background (the background is not usually a plain colour),
View 3 Replies View RelatedI have a gif with a image and my ultimate goal is to save the image only, change the color of this image and put it on a background image in a repeated pattern. I've been looking at the tile tutorials for the pattern, but the image comes out horribly distorted and without space in between. The background itself is a gradient color (another 2 hour adventure) so I need the image without any background.
View 3 Replies View Relatedis there a way to color an object black without selecting it. on one layer?
i also have a gradient shape on top of a black shape and im supposed to press delete to get a kind of line shape underneath but i cant do it.
there's an invisible 10px border around each object/shape. it's so frustrating when i'm working on small icons or whatnot.i'll try and give an example the best i can... say i have two squares overlapping and are offset from each other by a 5px or so. if i want to select the back square, i'd normally... click on the part of the square i can see. in cs6, if i just click on the visible part of said square, it would select the front square. i have to click at least 10px out from the back square to select it.
View 10 Replies View RelatedWhen extracting a subject from one image to another using the Quick Selection Tool and Refine Edge:
1. When is it better to make a selection of the background, make a layer mask of it, invert it, load the mask and use Refine Edge VS. just making a selection of the subject and using Refine Edge?
I recently saw on TV that someone had 2 nearly identical images - one with just the background, another one from exactly the same point of view featuring an object before the background.
He was then able to subtract the background so only the object in front remained. Is that possible with Photoshop as well? I have version CS3.
How to disable border highlighting when selecting a smart object in the layers panel? Designing pixel-to-pixel is cumbersome when the highlight appears and temporarily extends the size of the shape by 1 px.
View 14 Replies View RelatedI created two lines.
Before this problem appears, if I select one line then another line one-by-one, they are all selected.
But now, when I select one line then another line one-by-one, only last one is highlighted as selected (dashed line, two blue endpoints, and one blue middlepoint), the other one is not.
How do I switch back to the previous one?
I am trying to select End point of line for drawing rectangle and trying to select rectangle in PressPull command but i am not able to select in one side on other side i can do very nicely.
I am using AutoCAD 2012. first i draw floor plan in 2D . Then i switch to 3D Basic mode and i like to PressPull windows so i like to place and draw rectangle for PressPull but not able to do.
I am Attaching temp.dwg file.
I have a transparent PNG file that I want to overlap onto a background and be able to fill the transparent areas of the PNG with the background. I know you can do it for text but I can't figure out how to do it for images.
See my examples. M1.png is my transparent file. (not sure why the image is showing in black) I want to overlay this PNG on a background and have it come out looking similar to image m.jpg
To view these files [URL] .......
I have a very simple picture in jpeg format. The picture is all in white on an orange background.I would like to use Paint.net to select the white picture and place it on no-colour background.
View 4 Replies View RelatedI am using autocad 2012 new.. i hav problem with MOVE!
i am selecting an object to move but rather than moving it alone its moving like stretch!
Virtually all coordinate entry as well as many other tools and operations reference the current UCS. 2D tools.
Absolute and relative coordinate entry Absolute reference angles Definition of horizontal and vertical for Ortho mode, polar tracking, object snap tracking, grid display,and grid snap Orientation of horizontal and vertical dimensions Orientation of text objects View rotation using the PLAN command
Moving or rotating the UCS can make it easier to work on particular areas of a drawing. However when selecting an object or a portion of the dwg. crossing - window , (a good exemple is stretching) the selection of the area is still 'rectangular' from the ortho of 0° or 90°. This cross-window selection should follow the direction of the ortho angle selected. Is there a command or a setting in order for this operation to take place? IF NOT for future autoCad releases or a update for current releases should be reviewed and implemented
Whenever I switch renders layers I get the following error
/ Error: ...cameraMaskChange(unifiedRenderGlobalsWindow|rgMainForm|tabForm|mentalRayTabLayout|mentalRayCommonTab|scrollLayout|commonTabColum //
// Error: Invalid use of Maya object "unifiedRenderGlobalsWindow|rgMainForm|tabForm|mentalRayTabLayout|mentalRayCommonTab|scrollLayout|commonTabColumn|rgRenderableCamerasFrame|renderableCamerasSW|mayaSoftwareCameraLayout|columnLayout27|columnLayout28|columnLayout29|checkBoxGrp71". //
[code]....
Error: Invalid use of Maya object "persp"..it will happen for every camera in the scene until I close and re-open the scene! I do not know what causes it but it seems like whenever I delete a render layer it starts happening and it is driving me positively bonkers!
I created a legend in paperspace with a white background hatch. I want to move all of the text and symbols. When I select everything at the same time, it also grabs the hatch fill underneath. I can't do a window select to grab everything and shift select to subtract out of the hatch underneath.
View 8 Replies View RelatedI just upgraded to X5 the other day and started working with it. All seemed pretty normal until I drew a rectangle with a hairline and no fill. I typed in some text and went to click off of it to start a separate line of text only to find out when clicking inside this shape, and any other shape I made, it would select the shape.
View 8 Replies View Relateddrop shadow group.cdr
I've asked this in the X5 board before, gave up, and it's still bugging me with X6.
[URL].......
So I group a few objects, apply drop shadow to the group, and now I want to select one of the object in the group (to move it or resize it, etc).
I just can't find an effective way to do this without discarding the drop shadow, edit, and reapply the drop shadow. There have been many suggestion that seems to work for certain people, i.e. Ctrl+Click, Ctrl+Alt+Click, Ctrl+Alt+Shift+Click, but none works as desire.
In the attached example, I try to select the red square. If I Ctrl+Click, it selects the whole group. If I Ctrl+Alt+Click, it either selects the yellow circle, or edits the drop shadow.
If I Ctrl+Alt+Shift+Click, the result is random. It either selects the blue background square, or selects the yellow circle, or edits the drop shadow, and once in a blue moon successfully selects the red square.
Is there a way to keep the visual style when i select a object.
Example, when i want to align 2 blocks the block i select to move get in to 3d wired ... but the blocks are so complex that i no longer can find the right align points.
so i want to keep then in "conceptional are realistic", don't know if this is possible.
When you draw a marquee around several objects and you want to eliminate one thing from the selection, is there a way to unselect just one object from being selected without having to unselect and reselect everything else?
View 9 Replies View RelatedI'm trying to complete the code to select a p-line on layer G-POLY-GSF w/o asking for input. this (setq ent (ssget "X" (list (cons 8 "G-POLY-GSF"))) dosen't seem to work. What I'm I missing here?
(defun cf8 (/ ent dist obj)
(vl-load-com)
(setq ent (car (entsel "
Select line to offset: "))
;(setq ent (ssget "X" (list (cons 8 "G-POLY-GSF")))
[Code]....
In coreldraw x6 selecting text for editing show light blue background. How can I change it to gray as it is in coreldraw x5.
View 7 Replies View RelatedIs there a way to assign just specific vertices to a bone by selecting a separate part of an object? Like for example, I have a model of a gun which I'm trying to rig now and this gun has two barrels, one obove the other, and each of this barrel needs to be assign to a different bone. Those bones are there, but the problem is that certain parts (vertices) of second barrel are assigned as well to the second bone, which is incorrect. How do I select only part (an element) of an object and assign it to the bone?
View 5 Replies View RelatedYou know how when you're painting, you can hold ALT and it will pick a colour from the canvas? Well, for some reason, mine still picks up the colour but it sets it to the background colour instead of the foreground colour.
And when I actually select the colour picker tool, it will only select the background colour but when I hold Alt, it selects the foreground colour. Basically it's flipped where it's supposed to select.
How do I extract an object from its background in Photoshop cs 4? How do I change to a custom color in gradient?
View 3 Replies View RelatedI can't remove the background from a logo I have created. I am using Photoshop Elements. I bought a book and I searched the help index's and I could not find how to do this. I'm somewhat new to Photoshop but not a very beginner. I created the logo on a transparent background, but when I save it there is always a square border around the logo, usually white. I just want a .jpg of the logo itself.
View 2 Replies View Related
