When the newsletter was printed in 1 color (blue) the photos were a bit dark. The text was ok. The printer suggested that I "screen back 60%" the next newsletter.
Well....the time has come to print another newsletter. I don't understand what "screen back 60%" means and I certainly don't know how to do it.
Am new to CS5 and I discovered something quite accidently. In Essentials under styles I learned of these little boxes with dots around them and you could drag that over to your picture and a nice screen would appear over your photograph--much like the comic book effect if you did sketch and stamp and sketch and half tone, but this was an already made screen.
I went down the styles looking for how those dots formed into a screen where it would lay over your entire photograph. I'm not sure how I was able to get that effect, but any of those boxes I clicked on would have that screen with different sized dots. How do you do that with some skill?
I just purchased and installed Adobe Illustrator CS4. The first day I used it I had no problem, but now when I open images I get a black screen. Nothing I do causes the image to show. Event though I can see the images in the Layers control panel.
View 6 Replies View RelatedHow do I use two screens in Elements 11
View 7 Replies View RelatedWhat do I have to do to get screens that have a "Reply" button in my question and in the replies to them?
View 9 Replies View RelatedI was thinking of purchasing a chroma key/green screen backdrop because I have a lot of digital backdrops. What is the best way to swap out the background. To date I have used the magnetic lasso tool to cut subjects out and paste them on to another background, but the finished product looks like thats exactly what I did. I have seen other software that simply replaces the background. I have read everywhere that Adobe Photoshop is the "Industry Standard", therefore I refuse to purchase new software. What is the best method of making this work using Adobe Photoshop 7?
View 2 Replies View RelatedI have made a foreground to background linear graduated screen in PS6 / windows xp and although the color selector shows black, foreground shows black, and background shows white, I get an almost rainbow like assortment of various color bands across the page. I have made the screen with the rectangle tool and also with a new fill layer and get the same results.
I try to change the color... red, green, pink just to see what happens, but nothing changes. It also prints the same way. I put a second new fill layer with a pattern fill to hide the effect, but the page still has faint bands of the wrong color running across it. Any ideas on this issue?
Need your experience with LCD screens and color management. I'm thinking of getting an iMac, but have read that the color and viewability on LCD screens differ from CRT screens and that color management is more difficult.
View 3 Replies View RelatedI want to output jpg files as a slide show (not video) to various large LCD screens. Can someone advise me of the best image pixel dimensions and ppi for this? I have tried 4256 x 2835 at 300 ppi as generated by the psd file and it looks dreadful on a large screen. I don't have ready access to large screens, so I am not able to experiment myself. Also, when resizing images (both increase and decrease) is it best to have the "resample" box in "image size" ticked or not?
View 4 Replies View RelatedI am working on a big project that involves black and white photography for newspapers. I haven't had any experience with using line screens over my images and am wondering how to do them correctly. I tried help in Photoshop but I didn't have very good results with the Bitmap and then 85 line screen setting. Everything looked very noisy (worse than a printed newspaper) when I printed the file out.
View 4 Replies View RelatedHow do you take print screens of windows open on your computer?
View 2 Replies View RelatedOn my Macbook Pro Retina photographs that look stunning viewed in Preview, PhotoMechanic or iPhoto are all pixellated and blurred when viewed in Photoshop Elements 11.
View 4 Replies View RelatedIs there any way to choose which splash screens pop up in AC?
I spend way too much time every day, every week, every year telling the program that yes, I'm aware that I've just turned off the current layer, and yes, I want the program to do what I've just told it to do, etc.
Much of my Archived video is on DVD as a direct copy of the raw footage. I wanted to download a section from the DVD and to get VSx5 to split it into scenes. This facility is available when capturing from a DV camera but I cannot find the equivalent when capturing from digital media.
I can use the "Split by Scene" option but this only works on the Timeline and does not generate a Library of shots.
Is it possible to split your inventor session in 2 screens?
Without having to use 2 sessions ofc.
I'm having trouble making my project fit all screens.
This is my project link: [URL]
I've made this project 7000px wide - scrollable horizontal - with a fixed object (the shopping cart) to make it feel like you are pushing the cart along the street. I then set height to about 1200 px, to prevent the bottom of the screen to go white.
I want this project to look good on mobile, iPad, laptop and PC/Mac - both orientations.
I thought I was in the clear with theese settings, but checking it on a small screen (laptop), the bottom of the stage fell out of the screen. And we can't have that...
I tried setting the height to 100%, tried having a smaller height (800px) and setting the background color to green, tried hiding and showing the overflow, but I can't seem to hit the perfect settings for this to work.
My inspiration comes from this project:[URL] Now, this works - as far as I can see - on all screens, both orientations.
My title shows fine in the Premiere timeline, fine in a burned H264, fine in Encore when I scrub, fine in Encore when I play the preview BUT when I burn a dvd and play the burned dvd in dvd players the title is cut off (all four sides are cropped off).
BUT when I play the dvd with Windows Media Player on the computer, the title is fine on the computer monitor.
My flat screen has four aspects: Normal, Zoom, Wide and Cinema. I am using Normal. The other three settings crop it much more harshly.
I must record some ultrasound machine output for some research I am doing. I discovered that your software would allow me to specify s-video as the source and so I was successful in capturing that output as well as the sound that went with it.
However, there are three vexing little problems that would make the program far easier to handle for this purpose:
1. Many actions in the program cause it to reset the source to the default internal camera instead of staying with my s-video selection. Is there a way to set the s-video as the default source?
2. When we begin the capture, Ulead displays an overlay every time telling us that the video quality is substandard and would we like to continue. Give the noisy signal that every ultrasound machine produces, this question comes up every time and has to be answered yes or no. Can the program be set to not show that overlay and cost us time?
3. After we answer the question posed by that overlay, if the machine doesn't "hear" any input, it defaults to an error within 1 second. So, before we answer the overlay question that we wish to continue, we have to have the person with the microphone talk continuously or the program will cancel the capture automatically. Again, is there a way around this time-consuming action?
When I'm starting any X6 program, from time to time a nagging screen appears asking me to buy a premium membership.
Although there's a checkbox that reads something like "don't show this message again", it's impossible to check that control because the window closes immediately when the checkbox is clicked.
I've paid for CorelDRAW suite and believe that should be sufficient. So is it possible to disable these nagging screens?
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012 .
After installing windows upgrades on win 7 (64-bit) my Corel X6 products have gone mad.When i try to open Draw or Paint the program loads to the splash screen and locks.the splash screen is black and the program does not respond anymore.I tried to uninstall the X6 Graphics suite but the uninstall screen is Black as well..I tried to uninstall every windows update to the date the problem started, but no luck.I have too much info on my computer to do a whole install of all programs.
View 12 Replies View RelatedWe have a persistant blue screen. Stop Error 0x124 and 0x122.
PC spec:
Core i7 3.4Ghz
16GB RAM
GeForce 560Ti GTX
Intel DX79SI main board
Ever since we installed CAD LT 2014 we have persistant BsoDs on two PC's.
I have tried the GFX Hotfix. Seem to work for 2 weeks and now again a stop error 0x122.
The PC drivers are up to date, latest BIOS, all possible updates that are availible are install, even tried to disable the InfoCentre.
We did do clean Installs, swopped hardware. It keeps happening on 2 of the 8 PC's we have.
Would watching movies in the background have an effect? I am at the end of my diagnosis.
There are no hardware failure when running benchmarks or burn in tools. Only in CAD
I'm running ACADLT 3102 on a new Dell xps and the monitor is set to the recommended 1366x768 screen resolution. When certain menus like hatch open up, the bottom of the menu area is off the screen, there's not scroll bar and no way to move the menu up to hit the ok or cancel buttons. I've been getting around this by going into the control panel and changing the screen resolution, then finishing the hatch command, and waiting for the default screen resolution to take over again!
Is there anywhere in the program to change the size/shape of the command screens?? Can't find anything in Options>Display....
I often save drawings in DXF format elsewhere on another server for the sheet metal guys to be able to open them and work with them. It is a completely different folder and server than where my working folder is (and Vault as well). Is there a way to get that folder as a shortcut on the left where it shows my working folder? Difficult to drill down through all the necessary folders every time I save a DXF 100 times a day.
View 5 Replies View RelatedI am using Corel draw x6 to build a new website for my company. I have tried everything I can find but after exporting to html The resulting web page does not fill the different size screens in the office.
View 7 Replies View RelatedI must have done this when I was trying to do some other keyboard shortcut and got the wrong one - and now I can't figure out how to get rid of it. But a few weeks ago, I did something and now the file name, date/time and image size appear in white text over the top-left of any photo I have in the Develop or Library screens:
So you can see "_MG_0955.CR2" and the other details in the clouds there. How to get rid of that? I can't find anything in any of the menus. I'm on Lightroom 4.3 for Mac OSX Mountain Lion.
I just upgraded to photoshop cs4 from cs2, and I noticed that a feature which I really, really loved is now gone, and that is the Use Adobe Dialog option in the open/save/save as file browser.
I don't see any option for this anymore...was it taken out in CS4 or CS3? Or is there an option to enable it that I'm just missing?
I recently added 2 monitors to my set up to bring my total to 3. I am trying to figure out the best way to work on one drawing, with 2 differant veiws on each of the 2 main screens.
I would like my main screen to have the plan view and the second monitor to have an isometric veiw (or whatever I need at the time) of the same drawing. Is there a way to have the same drawing opened up in another window, in one session of Autocad 2013. One on the main screen and one on the secondary.
Inventor on a touch screen style PC, and if so... does it work? This hardware looks like it would be fun to work with, but I don't know if it's quite there yet for CAD work.
View 7 Replies View RelatedVersion: Photoshop CS (1)
Computer: Pentium 2.4 gHz dual core
4 Gigs Ram
Nvidia 7950 video card Win XP Home
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies View Relatedwhen I got my first Macintosh IICX and all of my MacPaint clip art. I don't want to get rid of the clip art because since I'm still using a black ink printer and not upgrading to a color one, the clip art looks nice in newsletters and the like.
Up until this time I had been using SuperPaint which had the New Superbits editing plug-in to refine the pictures so they had the smoother and cleaner lines instead of looking jagged. With my new computer and printer, I'm also getting Photoshop CS packaged with Adobe Creative Suite Premium, which I have never used before. Since I have not received my order yet, I was wondering if anyone could tell me whether Photoshop has the capability of improving the older MacPaint clip art like SuperPaint did with the New SuperBits editing plug-in. Over the past two days, I have been trying like crazy to back-up my pictures with SuperPaint and then re-saving them with Graphic Converter. It's been so incredibly slow that I thought I would go ahead and ask you, the experts, if Photoshop can also improve the quality of my older MacPaint clip art or if I should continue to back-up my clip art like I have been doing.