Photoshop Elements :: Use Two Screens In 11?

Jul 30, 2013

How do I use two screens in Elements 11

View 7 Replies


ADVERTISEMENT

Photoshop Elements :: Why Does 11 Have Poor Resolution On Retina Screens

Sep 2, 2013

On my Macbook Pro Retina photographs that look stunning viewed in Preview, PhotoMechanic or iPhoto are all pixellated and blurred when viewed in Photoshop Elements 11.

View 4 Replies View Related

Photoshop :: Screens

Dec 19, 2008

When the newsletter was printed in 1 color (blue) the photos were a bit dark. The text was ok. The printer suggested that I "screen back 60%" the next newsletter.

Well....the time has come to print another newsletter. I don't understand what "screen back 60%" means and I certainly don't know how to do it.

View 3 Replies View Related

Photoshop :: How To Apply Screens In CS5

Mar 9, 2012

Am new to CS5 and I discovered something quite accidently.  In Essentials under styles I learned of these little boxes with dots around them and you could drag that over to your picture and a nice screen would appear over your photograph--much like the comic book effect if you did sketch and stamp and sketch and half tone, but this was an already made screen. 

I went down the styles looking for how those dots formed into a screen where it would lay over your entire photograph.  I'm not sure how I was able to get that effect, but any of those boxes I clicked on would have that screen with different sized dots.  How do you do that with some skill? 

View 8 Replies View Related

Photoshop :: Black Screens

Oct 20, 2008

I just purchased and installed Adobe Illustrator CS4. The first day I used it I had no problem, but now when I open images I get a black screen. Nothing I do causes the image to show. Event though I can see the images in the Layers control panel.

View 6 Replies View Related

Photoshop :: Get Screens That Have A Reply Button

Mar 5, 2012

What do I have to do to get screens that have a "Reply" button in my question and in the replies to them?

View 9 Replies View Related

Photoshop :: Green And Blue Screens

Sep 11, 2007

I was thinking of purchasing a chroma key/green screen backdrop because I have a lot of digital backdrops. What is the best way to swap out the background. To date I have used the magnetic lasso tool to cut subjects out and paste them on to another background, but the finished product looks like thats exactly what I did. I have seen other software that simply replaces the background. I have read everywhere that Adobe Photoshop is the "Industry Standard", therefore I refuse to purchase new software. What is the best method of making this work using Adobe Photoshop 7?

View 2 Replies View Related

Photoshop :: Graduated Screens Not Uniform In Color

Sep 24, 2008

I have made a foreground to background linear graduated screen in PS6 / windows xp and although the color selector shows black, foreground shows black, and background shows white, I get an almost rainbow like assortment of various color bands across the page. I have made the screen with the rectangle tool and also with a new fill layer and get the same results.

I try to change the color... red, green, pink just to see what happens, but nothing changes. It also prints the same way. I put a second new fill layer with a pattern fill to hide the effect, but the page still has faint bands of the wrong color running across it. Any ideas on this issue?

View 3 Replies View Related

Photoshop :: LCD Screens (iMac) And Color Management

Jan 14, 2004

Need your experience with LCD screens and color management. I'm thinking of getting an iMac, but have read that the color and viewability on LCD screens differ from CRT screens and that color management is more difficult.

View 3 Replies View Related

Photoshop :: Resizing Images For Large LCD Screens

May 18, 2009

I want to output jpg  files as a slide show (not video) to various large LCD screens. Can someone advise me of the best image pixel dimensions and ppi for this? I have tried 4256 x 2835 at 300 ppi as generated by the psd file and it looks dreadful on a large screen. I don't have ready access to large screens, so I am not able to experiment myself. Also, when resizing images (both increase and decrease) is it best to have the "resample" box in "image size" ticked or not?

View 4 Replies View Related

Photoshop :: Black And White Newspaper Line Screens

Mar 13, 2003

I am working on a big project that involves black and white photography for newspapers. I haven't had any experience with using line screens over my images and am wondering how to do them correctly. I tried help in Photoshop but I didn't have very good results with the Bitmap and then 85 line screen setting. Everything looked very noisy (worse than a printed newspaper) when I printed the file out.

View 4 Replies View Related

Photoshop :: Print Screens Of Windows Open On Your Computer?

Mar 8, 2008

How do you take print screens of windows open on your computer?

View 2 Replies View Related

AutoCAD LT :: Choose Splash Screens That Pop Up

Jun 27, 2013

Is there any way to choose which splash screens pop up in AC?

I spend way too much time every day, every week, every year telling the program that yes, I'm aware that I've just turned off the current layer, and yes, I want the program to do what I've just told it to do, etc.

View 9 Replies View Related

VideoStudio :: Capture Screens From Digital Media

Dec 29, 2012

Much of my Archived video is on DVD as a direct copy of the raw footage. I wanted to download a section from the DVD and to get VSx5 to split it into scenes. This facility is available when capturing from a DV camera but I cannot find the equivalent when capturing from digital media.

I can use the "Split by Scene" option but this only works on the Timeline and does not generate a Library of shots.

View 4 Replies View Related

AutoCAD Inventor :: Split Session In 2 Screens?

Aug 23, 2010

Is it possible to split your inventor session in 2 screens?

Without having to use 2 sessions ofc.

View 4 Replies View Related

Edge Animate CC :: Make Project Fit All Screens?

Nov 7, 2013

I'm having trouble making my project fit all screens.
 
This is my project link: [URL]
 
I've made this project 7000px wide - scrollable horizontal - with a fixed object (the shopping cart) to make it feel like you are pushing the cart along the street. I then set height to about 1200 px, to prevent the bottom of the screen to go white.
 
I want this project to look good on mobile, iPad, laptop and PC/Mac - both orientations.
 
I thought I was in the clear with theese settings, but checking it on a small screen (laptop), the bottom of the stage fell out of the screen. And we can't have that...
 
I tried setting the height to 100%, tried having a smaller height (800px) and setting the background color to green, tried hiding and showing the overflow, but I can't seem to hit the perfect settings for this to work.
 
My inspiration comes from this project:[URL] Now, this works - as far as I can see - on all screens, both orientations.

View 2 Replies View Related

Premiere Pro :: Why Is DVD One Size In Encore But Cut Off On Flat Screens

Dec 1, 2013

My title shows fine in the Premiere timeline, fine in a burned H264, fine in Encore when I scrub, fine in Encore when I play the preview BUT when I burn a dvd and play the burned dvd in dvd players the title is cut off (all four sides are cropped off).
 
BUT when I play the dvd with Windows Media Player on the computer, the title is fine on the computer monitor.
 
My flat screen has four aspects: Normal, Zoom, Wide and Cinema. I am using Normal. The other three settings crop it much more harshly.

View 1 Replies View Related

VideoStudio :: S-Video Input And Bothersome Overlay Screens

Aug 2, 2012

I must record some ultrasound machine output for some research I am doing. I discovered that your software would allow me to specify s-video as the source and so I was successful in capturing that output as well as the sound that went with it.

However, there are three vexing little problems that would make the program far easier to handle for this purpose:

1. Many actions in the program cause it to reset the source to the default internal camera instead of staying with my s-video selection. Is there a way to set the s-video as the default source?

2. When we begin the capture, Ulead displays an overlay every time telling us that the video quality is substandard and would we like to continue. Give the noisy signal that every ultrasound machine produces, this question comes up every time and has to be answered yes or no. Can the program be set to not show that overlay and cost us time?

3. After we answer the question posed by that overlay, if the machine doesn't "hear" any input, it defaults to an error within 1 second. So, before we answer the overlay question that we wish to continue, we have to have the person with the microphone talk continuously or the program will cancel the capture automatically. Again, is there a way around this time-consuming action?

View 2 Replies View Related

CorelDRAW Graphics Suite X6 :: Possible To Disable Nagging Ad Screens

May 7, 2013

When I'm starting any X6 program, from time to time a nagging screen appears asking me to buy a premium membership.

Although there's a checkbox that reads something like "don't show this message again", it's impossible to check that control because the window closes immediately when the checkbox is clicked.

I've paid for CorelDRAW suite and believe that should be sufficient. So is it possible to disable these nagging screens?

CorelDRAW Graphic Suite X6.4  @  Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012 .

View 3 Replies View Related

CorelDRAW Graphics Suite X6 :: Splash And Install Screens Go Black

Aug 5, 2013

After installing windows upgrades on win 7 (64-bit) my Corel X6 products have gone mad.When i try to open Draw or Paint the program loads to the splash screen and locks.the splash screen is black and the program does not respond anymore.I tried to uninstall the X6 Graphics suite but the uninstall screen is Black as well..I tried to uninstall every windows update to the date the problem started, but no luck.I have too much info on my computer to do a whole install of all programs.

View 12 Replies View Related

AutoCAD LT :: Constant Blue Screens When Working Between Drawings 2014

Aug 29, 2013

We have a persistant blue screen. Stop Error 0x124 and 0x122.

PC spec:

Core i7 3.4Ghz

16GB RAM

GeForce 560Ti GTX

Intel DX79SI main board

Ever since we installed CAD LT 2014 we have persistant BsoDs on two PC's.

I have tried the GFX Hotfix. Seem to work for 2 weeks and now again a stop error 0x122.

The PC drivers are up to date, latest BIOS, all possible updates that are availible are install, even tried to disable the InfoCentre.

We did do clean Installs, swopped hardware. It keeps happening on 2 of the 8 PC's we have.

Would watching movies in the background have an effect? I am at the end of my diagnosis. 

There are no hardware failure when running benchmarks or burn in tools. Only in CAD

View 4 Replies View Related

AutoCad 2D :: Program To Change Size / Shape Of Command Screens?

Oct 7, 2012

I'm running ACADLT 3102 on a new Dell xps and the monitor is set to the recommended 1366x768 screen resolution. When certain menus like hatch open up, the bottom of the menu area is off the screen, there's not scroll bar and no way to move the menu up to hit the ok or cancel buttons. I've been getting around this by going into the control panel and changing the screen resolution, then finishing the hatch command, and waiting for the default screen resolution to take over again!

Is there anywhere in the program to change the size/shape of the command screens?? Can't find anything in Options>Display....

View 8 Replies View Related

AutoCAD Inventor :: Adding Folder To Save And Open Screens

Jul 1, 2013

I often save drawings in DXF format elsewhere on another server for the sheet metal guys to be able to open them and work with them. It is a completely different folder and server than where my working folder is (and Vault as well). Is there a way to get that folder as a shortcut on the left where it shows my working folder? Difficult to drill down through all the necessary folders every time I save a DXF 100 times a day.

View 5 Replies View Related

CorelDRAW Graphics Suite X6 :: Resulting Web Page Doesn't Fill Different Size Screens

Jun 8, 2012

I am using Corel draw x6 to build a new website for my company. I have tried everything I can find but after exporting to html The resulting web page does not fill the different size screens in the office.

View 7 Replies View Related

Lightroom :: Title And Time / Date Appearing Over Photo In Develop Or Library Screens?

Jan 7, 2013

I must have done this when I was trying to do some other keyboard shortcut and got the wrong one - and now I can't figure out how to get rid of it. But a few weeks ago, I did something and now the file name, date/time and image size appear in white text over the top-left of any photo I have in the Develop or Library screens:

So you can see "_MG_0955.CR2" and the other details in the clouds there. How to get rid of that? I can't find anything in any of the menus. I'm on Lightroom 4.3 for Mac OSX Mountain Lion.

View 2 Replies View Related

Photoshop :: "Use Adobe Dialog" In Open/save Screens...

Oct 21, 2008

I just upgraded to photoshop cs4 from cs2, and I noticed that a feature which I really, really loved is now gone, and that is the Use Adobe Dialog option in the open/save/save as file browser.

I don't see any option for this anymore...was it taken out in CS4 or CS3? Or is there an option to enable it that I'm just missing?

View 8 Replies View Related

AutoCAD 2013 :: Setting Up One Drawing In Multiple Screens With One Session Of 2013

Nov 21, 2013

I recently added 2 monitors to my set up to bring my total to 3. I am trying to figure out the best way to work on one drawing, with 2 differant veiws on each of the 2 main screens.

I would like my main screen to have the plan view and the second monitor to have an isometric veiw (or whatever I need at the time) of the same drawing. Is there a way to have the same drawing opened up in another window, in one session of Autocad 2013. One on the main screen and one on the secondary. 

View 1 Replies View Related

AutoCAD Inventor :: Touch Screens And Inventor

Dec 3, 2012

Inventor on a touch screen style PC, and if so... does it work?  This hardware looks like it would be fun to work with, but I don't know if it's quite there yet for CAD work. 

View 7 Replies View Related

Photoshop Elements :: Why Do Media Elements Disappear From Timeline And Slide Sorter

Oct 8, 2012

I have not renamed or moved original elements, yet when I recently opened an on-going project in Photoshop Elements 4.0, about 1/4 of the media elements were gone. Why? Is there a way to troubleshoot this? Anyway to recover these slides? Can't see that any photos, etc in the Organizer have broken links.

View 1 Replies View Related

Photoshop Elements :: Import Images From Scanner In Adobe Elements 11 Organizer

Sep 1, 2013

Why can I import images from my scanner in Adobe Elements 11 in the organizer but not in the photo editor? I have Windows 8 64 bit.

View 2 Replies View Related

Photoshop Elements :: Getting Separate Movable Text Elements In Single Layer?

Dec 20, 2013

Is there any way to have more than one text placement inside of a single layer, but be able to maintain and move each of those separately from the others?   From what I have seen, each new Text item gets its own new layer.   If I want to document an image with seven points of reference, it's absolutely crazy that I have to maintain seven layers, each with an integer 1, 2, 3, 4, 5, 6, or 7.   What would be much more maintainable is to create ONE layer and name it "MAP-NUMBERS" and then have seven integers placed into that one layer.   I would then want to be able to move - say - "2" around separately from "4".   Then making all of the numbers appear or disappear becomes as easy as hiding or showing one layer.
 
Is there a way to do this with any version of Photoshop?

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved