When I try to save a selection to other than a New channel, the Save Selection box only allows saving to a New channel and grays out the other options. How do you save a selection to another channel and/or activate the other options?
View 2 RepliesI thought that I could just use Quick Mask to manually paint with 100% black or 100% white to adjust the boundaries of the selection and then save that final selection as my alpha channel.
However, I'm discovering that when I do this, I end up getting a weird grey-ish artificat (which incidentally, I can't figure out how to remove it). How I should be properly modifying the selection prior to actually saving it.
I made a complicated selection, which I saved to a channel. Then I inverted the selection and tried to delete the inverse (hopefully to transparency, but deleting to a background color would be better than not deleting at all). However, nothing happens when I press the delete key, or when I select "Clear" from the edit menu. Trying to use the Cut command doesn't work, either.
After deselecting, I can get the selection back through the channels dock, by right-clicking and then choosing "Channel to selection" or "Add to selection." It appear to replace the selection from the channel properly. I just can't delete anything.
I am trying to select the aplha channel (and make it a selcetion ) by using the command +mouse click but I only get the black selected not the white. So i have to invert selection, which is annoying. Am i missing something? this worked 2 weeks ago and now it has changed.
View 3 Replies View RelatedCS5, OS 10.6.6, 2.93 GHz Quad Core Intel Xeon
Making a mask from a selection the not-selected area is 95% black, not 100%.
So the not-selected area IS affected if the mask is applied, say using an adjustment layer.
Is there a preference somewhere, or a key command that was inadvertently applied?
I have photoshop cs6, and I was just wondering how to save a selection in channel mode.
So for example (below), If i wanted to only copy the part of this picture that has white and the plant in the picture how would i do this? I've tried colour range but it didn't work so I am very stuck.
I have a series of files in which I improperly modified the selection set prior to saving the selection, and now around the intended viewable area there is a hazy artifact that seems to correspond to where I manually edited the selection using Quick Mask (prior to saving).
In other words, within the area of the alpha channel that should be invisible, there is actually a visible, unwanted grey-ish artifact, and I think it's related to how I was using the brush to edit the selection in Quick Mask before saving.
Now I am unable to edit the alpha channel, although Adobe's own website says that in order to edit an alpha channel, all I need to do is select the alpha channel (which I am doing) and then paint at 100% black or white with a brush to either include or exclude parts of selection set.
When I choose the brush and start painting at 100% black or white, nothing happens and I can't figure out what is happening.
The exact steps that I'm taking are below:
1) click on alpha channel (visible and ready for editing), all other channels only visible not active.
2) selecting the brush at either 100% black or white
3) attempting to paint to alter the alpha channel (I've tried painting on the actual alpha channel in Channels, and I've tried painting on the alpha channel as it appears in Layers, and neither works for me).
CLARIFICATION:
I actually am able to "edit" the alpha channel HOWEVER I cannot remove the hazy artifact. I can use 100% black or white to remove the pink/light red areas on either the actual alpha channel (in the Channels area) or as it appears in Layers, but I cannot remove the areas that are grey-ish (well I can paint them white but I can't paint them black, i.e. fully pink).
A teacher showed me a quick fix process that basically involves activating the alpha channel, inverting the selection, and then deleting everything outside of the alpha channel, and then resaving the file. That worked at one point, but now that quick fix is not working either (I am just ending up with a completely visible, white space around the intended visible area, rather than an invsible area).
EDIT (07:22 3.20.13) Also, if you look at what Photoshop is registering as the actual alpha channle, it doesn't match with what I'm seeing above, that is the black and white alpha channel appears to be as expected, and there is not the weird distortion that I'm seeing above in the pink/grey image.
I have a selection in a Photoshop RGB document. I would like to add a constant value (say +16, for example) to all of the red values for each pixel in the selection.
View 4 Replies View RelatedIs there a 'Load channel as selection' icon in Photoshop Elements 11?
View 1 Replies View RelatedSaving selections and alpha channel masks?
View 2 Replies View RelatedWhen I save an OIL PAINT file created in Photoshop CS6, it saves with red and blue shapes over the image. Before saving, the image looks fine. I'm running windows 8. Is it me or a CS6 bug?
View 1 Replies View RelatedOne project I use Photoshop CS4 for is painting aircraft used with Microsoft Flight Simulator X (FSX). Each aircraft is downloaded as a "Paint Kit".I paint and add layers onto the kit until the aircraft resembles the design I chose. The paint kit includes a background, base parts usually in white, and an assortment of layers adding physical wear, shading, lines and rivets you see on actual aircraft.
Additionally, the kit includes an RGB Alpha Channel and Specular Maps. In this application, the Alpha channel provides the reflectivity or gloss on the aircraft paint. The Specular maps provide a sheen much like the subtle reflections you see from a metal flake paint job when the sun hits it directly.
Once all painting and manipulation is complete, the kit is "cut" into specific sizes. Once the kit is cut, each section is saved as a DDS file using NVidia tools. The resulting DDS files are placed into folders within the main FSX program folder. The FSX program "assembles" the sections and processes the different layers and channels resulting in aircraft that are incredibly detailed and realistic.
My problem is I don't know how to properly integrate and preserve the Alpha channel during the "Flatten Image" and when saving the file as a dds file. As you can see in the "Layers" section in the picture, the Alpha channel is already made. I just don't know what to do with it to preserve it and ensure the reflectivity it provides is visible in the final product.
what I need to know isn't what the alpha does, but how to properly integrate it into the final product. I've searched for this info for the last several days, but I've had no luck in finding specific information on how to do that. URL....
This question is more theoretical, as I have found a work around. On a layer, I have a gray color, which I sample, and it becomes the desired Foreground color.
I would like to Fill a Selection in an Alpha Channel with this gray color.
However, when I view the Alpha channel, my forground color is lost to black/white, which I understand, as the Alpha channel is a gray scale image.
But, I am able to sample a gray Swatch to make a Foreground color, but how can I preserve my chosen Foreground gray selected from a Layer? The only way that I know would be to make a new Swatch, and then use that when I am in Channels.
I am making selections of models off of a white background. I use the quick select tool and refine to make a clean selection. I go in and use the clone tool to remove the "halo" that is still there to make a super clean selection with no light bleed on the model. I put a black layer underneath to make sure that I got all of the remnants. I save the selection and turn it into a channel. I apply the layer mask and everything looks good. I flatten the image and put it on a white background (this is the desired form of delivery for client) Image saved and closed. When reopened, I make a selection using the channel and there is a distinct halo effect still present. I have tried making the selection and going over it a couple times with the brush at 100% and it works a little bit, but not entirely. I have already spent a lot of time going through cloning things out so it looks good, delivering the images, then they are sent back because of the halo.
View 8 Replies View RelatedI've come across a weird problem. Whenever I select a channel in the channel box ("Translate X" for example) it is immediately unselected. This prevents me from selecting a channel and middle-mouse dragging in the viewport to adjust its value.
This only happens in particular scenes. But if I start a fresh scene, I do not have the problem. Is there a button somewhere that I need to deactivate to fix this?
I have removed the background from a photo using selection deleting to transparency via alpha channel. My dog was left. I then exported to png. When I try to upload the dog to use in a label, (Open Office), the back ground turns to white.
What am I doing wrong?
Confirm that the alpha channel is not saving correctly for TGA files using PSPro X4?
1 Create an image with an alpha channel.
2 Save image as a TGA.
3 Close and re-open the TGA then load a selection from alpha channel.
When I save a render as PNG and then open it in Photoshop, it doesn't have the alpha channel, just R,G & B channels. The PNG Configuration Setup when saving the image has of course Alpha channel box checked, but is not available when I open the file in Photoshop.
Note: I was able to do this in 2008 version.
I have another question about GREY images.
Example: CTRL+click on grey channel theoreticly (by my theory) make selection from white depending on its value. So cuting out must leave transparent greyscale image. But it don't (okey, it do, but changes black value):
The same selection inverted and filled with 100%K gives correct result: Is my "theory" about CTRL+click selection wrong? Becouse for my point of view, both ways should give same result.
I am trying to save a selection from a photo to open in Dreamweaver. I am able to mask the selection and eliminate the background, but when I open up the image in Dreamweaver I have white where the background was. How do I eliminate everything around my selection to have just the selection appear?
View 6 Replies View RelatedI have a picture a i've cut some part of it. Now i would like to save this cut/selection in a new .jpeg file.
how i can save a selection to a .jpeg file?
I am a screen printer and I print my separations from Photoshop. I routinely work with multi channel files or RGB files with additional spot color channels. I have created actions to place my registration marks, re-size images, etc to get ready to print but I manually have to create the text labels for each screen if they are missing from the original artwork.
The files I work with have channels named as "Base White, Red, Green, 284 Blue" etc indicating the ink color. What i would like to be able to do is click an action that would copy the text from the channel name and insert it into a separate or each/all channels near the top of the file so that when I print each positive it has a corresponding label for ink color.
I am not sure if this is even possible, and I am limited on my knowledge when it comes to actions and have pretty much got lucky in the past getting them to do what I want without unnecessary steps.
On my registration target action it creates a new channel with each individual reg mark then combines them into one separate channel in which I just copy the contents and select all the ink channels and fill with black to make them appear, i'm happy with the steps it takes as it isn't too much trouble and if this could do the same with labels I would be happy with that.
My question is this (its pretty easy so I hope its just a stupid oversight on my part) but anyway...
I just got into messing around with photoshop lately and in a tutorial in a magazine I read for a certain step I read the following:
1) "We need an accurate selection of the figure, so go to the Channels palette and click on the Red channel. Choose the Brush Tool and select a hard round brush from the Brush Preset Picker . Hit Q to enter Quick Mask Mode and paint over the figure...after completing the Quick Mask, hit Q again to exit Quick Mask and save this selection via Select>Save Selection naming it Outline. Click on the RGB channel, before returning to the Layers palette."
Now that was simple enough to understand and the first time I went about it it worked fine...as soon as I clicked "Q" again to leave quick mask mode the portion i just colored in in quick mask was selected by a dotted line...
My problem is that now it doesn't do that anymore. No matter what .jpg file I use...after i leave quick mask mode there is no selected outline and no option to "save selected"...the only thing that is selected is the entire square outline of the canvas...IT COMPLETELY IGNORES WHAT I COLORED IN QUICK MASK
Just made sure updates for the video card and all the hardware were current and still getting this problem where when I go to adjust a channel of video a random frame from the below channel will insert itself into the clip that I just moved as if it was married into the source footage.
Adobe Premiere Pro
Running an nVidia 660 with 331 drivers installed
Win7 64 bit ultimate
How can I get the channel subassembly to attach to the assembly insertion point at the channel flowline marker? I need the flowline to follow my profile elevations.
View 4 Replies View RelatedI have a selection of various components in an assembly model in Inventor which I want to use to demote. When I click off these components the selection set is lost. Is there a way that Inventor can remember a selection set of components so that I do not have to re-select all the components again ? Similar to the 'select-previous' command in ACAD ?
Product Design Suite Ultimate 2013
64-bit HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Anthony Goodwin ~ Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I have several customers that I do only laser engraving work for, is there a way to somehow open their files and have the printer default to the laser instead of my printer? I have tried everything I could find in settings and defaults, but they seem to be program centric instead of file centric.
View 3 Replies View RelatedI was wondering if there might be a way to add the option to save a selection to the disk? when i work i create many selections with complicated shapes and areas.
since i need to use them more then once i was wondering if a feature for saving only the selection can be implemented ? this would enable me to load the selections to new projects and use them there making the same "print" every time.(my work around for this is saving a B/W picture of the shape then uploading it every time i need it , then copy and paste to a new layer
in the new project then selecting the shape area then flatting the image with the selection and deleting the internal area or the invert ) its long but works.if you can add "File Open into a NEW layer", this would save the need for part of my work around. i would then just load the save to the new layer and use it directly :-)
* This would be a great new feature anyway "File Open To a New layer" ... :-)
I saw this the save/load selection feature the other day in a photoshop presentation and was shocked that it's real :-)So if such feature can be added to paint.net even in version 4.0 it would be great and time saving too.
I have been continually annoyed, when creating a vector mask-heavy document, with trying to select vector mask points by dragging a rectangle only to find that it instead selects a layer higher up which has a larger vector mask.
The only workaround is to manually select the points of my mask or to drag a rectangle from outside the canvas, meaning I have to zoom out or scroll to the edge - sometimes annoying if I am zoomed in quite far.
I know that the move tool can be set to automatically select a layer, depending on what part of the image is clicked, but why is there not an option to turn this off for vector editing?
If you look closely in the attached picture, there is a spot of light blue on the player's helmet, that looks like a mistake (think it should look like the grass behind it)...though it actually may be part of his helmet.
Regardless, I'd like to take it out. My idea was to select the blue with the quick selection tool, then bring that selection out to the grass, select the grass with that size/shape of selection, copy/paste and then bring the grass selection into the blue part so it looks like grass in what was the blue part.
The problem is I don't seem to be able to move the selection without taking the blue with it (so it's not an empty selection and therefore can't select a piece of the grass.)
I have Photoshop CS5 on a Mac OS 10.7.4 My problem is that when I am using curves or a slider, my selection does not stay in the same place. For example, I chose the number 8 on a slider, after I release my selection it will either go one number after or before my selected number. I have had this problem since I got my computer, December 2011, but it has only recently started to frustrated me because of having to use Photoshop a little more than I usually do.
View 2 Replies View Related