What are the correct settings for saving as optimized any web site design. I've tried several different settings but no matter how I save it, it always loads the site on internet a piecs at a time, very strange. Never the entire site even when I save Css.
View 3 RepliesWhen saving images for the web, I know that it is best to..
file>save for web>save it as a jpeg high 60, depending on what kind of image> and make sure the optimized button is checked...
I was told that there is not point in saving images just as...
file>save as> and then choosing 12 on the quality bar which is titled 'image options' under the JPEG OPTIONS pop up which appears when doing this.
1. What is the difference. Why does saving for web make the image size so much more smaller. I tried test and it doesn't seem the quality changes so what makes the image smaller in size when saving for web?
2. Is saving like this
file>save for web>save it as a jpeg high 60, depending on what kind of image> and make sure the optimized button is checked...
the same thing as saving like so
file>save as> and then CHOOSING 8 on the quality bar (this is also jpeg high) which is titled 'image options' AND CHOOSING BASELINE OPTIMIZED UNDER THE SECTION WHICH IS TITLED 'FORMAT OPTIONS'....
baseline optimized being the most important part.
i made a button using gregs plasma effect when i go to save it i can't get rid of the white around the edges and i saved it in the highest settings i could what can i do to get rid of the white
View 9 Replies View RelatedWhen using the "Save Optimized" dialog in Adobe Acrobat X, we can see that Acrobat strips out a LOT of stuff from the document to make the size as manageable as possible. But I can't for the life of me find the checkbox corresponding to whatever it is that strips LINKS from the document.
When I use the "Save Optimized" option, then try to view the document in Reader, I can see the cursor change to a hand when it hovers over what SHOULD be a link, but there's no url attached to the link anymore. Clicking does nothing. "Save Optimized" kept the link there, but stripped the info of where the link is supposed to take the user.
what to uncheck to make sure links remain intact after a "Save Optimized"?
problem with ImageReady saving the optimized output as .gif file. I create a psd file in PhotoShop then edit in Adobe ImageReady. I create the slices from guides, set my output setting, then when I do File, Save Optimized Settings and try and change the Save as type, it will not let me save as .gif. Only .html or .jpg. How do I make it save as .gif
View 1 Replies View RelatedI created i a rollover image in photoshop for a web site and i imported it into imageready i set up the different states for it and it works right know the probalm i'm having is that in order to get the image into dreamweaver i need to Optimize the image. What happens is the image gets very contrast and fuzzy looking.
View 1 Replies View Relatedhow to accomplish creating a web optimized graphic with a smooth gradient using PS7.
it seems that you will not be able to generate such a graphic using the default settings in photoshop.
I am right now using the maximum number of colors allowable in the 'save for web' optimization tool (which is 256 for both jpg and gif apparently) I know JPGs are the file type for the job generally speaking, but without optimization the JPG is too large to use for a web page header.
while the catalog was optimized, LR4 seems like frozen.
View 1 Replies View RelatedI'm working on a print document and do not understand the behavior of Designer Pro X9 concerning image optimizing. When I drag an image from explorer onto my document, I'm being prompted (as expected) to decide, whether I want to import the original size image or a resized version. Choosing the high resolution version gives me the full size bitmap to work with on my page.
But as soon as I drag the same image from the bitmap gallery onto my page, I get a downsized version of 1920 x 1280 pixels, which also immediately appears as a copy in the bitmap gallery. Why this happens and if and where I can prevent X9 from doing this?
I am updating a customers website now and have added a couple of items to a page and I now receive a pop up error - OUT OF MEMORY.I have optimized the photos and saved/closed/restarted but still not removing the error -
View 9 Replies View RelatedI am facing problem while using Save / Save As / Save for web options in my Photoshop. On clicking Save / Save As commands, my photoshop gets closed abruptly and I am losing all data. If I choose Save for Web option, the file Save dialog box appears and when I click on the 'Save' button, the application gets closed abruptly.
It was working fine yesterday. My version is bundled in the Technical Communicator suite 3.5 and I faced some problems with Adobe Acrobat, for which my IT team took support from Adobe and got it resolved just two days ago. (Case ID - 184809966)
I use autocad architecture 2013 and it works just fine until the save turns to qsave whenever i want to save a drawing by save, save as and ctrl+s it works as qsave..how can I turn it back to SAVE ?
View 9 Replies View RelatedI am having a catastrophic error in Inventor 2013.
When I attempt to save a drawing I have completed, I cannot save!
Can't save, save as or any other variation of save.
This is my issue every time I click save.
URL....I am using PSE 12 as a photo editor for Aperture 3.5.1 and the photo is duplicated (as a tiff) in Aperture and PSE editor opens with the image. When I close the file and say to save the file it brings up the save as window.
I tell PSE 12 to "on first save -- save over current file" it now brings up the "save as" window and won't save over the file (changes the file type from .tiff to .tif)
I've created an action that uses the save for web dialogue to optimise images for the web. When I use the batch command to process a full folder of images, even though I have "Override action "save as" command" checked, it ignores this and still uses the location that was used when the action was created.
Apparently this is a known issue in CS6 and previous versions but whether this has been fixed in Photoshop CC?
I have Photoshop CS6 and Elements Premiere 11 and both were showing estimated file sizes properly up until a couple of weeks ago, and both stopped at the same time. Using Image, Mode I have verified on both that the images I am trying to save are 8 bit and not 16 bit images. I am on Window 7, 64bit.
View 9 Replies View RelatedFrom the start, I wasn't able to save to jpeg without getting a dcm extension (no jpg extension). However, if I saved to Multi-picture Format, I would get the familiar .jpg and everything worked fine for a while. This morning I cannot find a file format in "save as" that results in the .jpg file extension.
View 2 Replies View RelatedAfter designing, i try to save the image by clicking save as, but it does not trigger any thing. even if i click save alone. it's still the same thing. Until i try to close the interface, then it will pop-up a dialog message that do i want to save before i close or not, then i click yes but it does not display png,jpeg and the likes as file extension. it only displays psd and some uncommon extensions.
View 3 Replies View RelatedI cannot save images from Photoshop CC as a dialogue box opens with "cannot save image.....as you do not have write access
View 2 Replies View RelatedWhen I first started using CS6 I would edit my photos and when I used "save as" to save my photos then open them in a different photo viewer they would have lost a lot of color and contrast. When I reopened them in CS6 they still had no color. This is all occured on my PC. I used to use PSE 7 (on my PC) and the "save as" function to save them and they turned out fine. I recently got an iMac and when saved on there the same way and reopened in a different viewer they'd have the correct color,
but when opened on my PC the color would be lost again. Also tried opening the images I saved on my PC in CS6 on the iMac and they still had no colo/contrast. So that would mean it's not a monitor calibration thing. I'm trying to figure out how to save my photos so they have the best quality they can have for printing and also the correct color for clients to view on their computers.
PS: I did use the "save for web" option on my PC and the photos have the correct color that way! But those aren't the proper size and stuff for printing. Also I'm very new to iMac and full photoshop so I'm not sure what sizes/pixels/color modes/etc are normal or what photos are supposed to be.
I'm running Windows XP with Photoshop CS6. Since the "Save" button runs off the edge of my monitor, I can't click Save. I also can't move the dialogue box up far enough to get to it before running out of screen space. I tried just hitting the enter key, but nothing happened. I end up having to do a control-alt-delete to get out of Photoshop altogether.I've never had this problem before when I had CS2 or with the CS6 I have at work.Is there a way around this?
View 2 Replies View RelatedI'm only on CS5. Is there a way to save a crop as one might save a non destructive layer?
View 4 Replies View RelatedI need to convert a large number of images to png and need to later sort them by the original date created. "Save as" results in the current date/time as the date created. CS5.
View 4 Replies View RelatedI have a PSD file (16bits/prophoto RGB) with some layers. I combine the layers to ONE and change the bit depth to 8 bits.
Then I do one of two things:
(a) I save the file for the web in JPEG 90% high-quality and with sRGB ... filesize 340 602
(b) I change the color profile to sRGB and save the file as JPEG in the highest quality (10) ... filesize 174 549
I am at loss here. How on earth is it possible that the second file is almost half the size as the one saved for the web?What effect causes this? It is very easy to save for yhe web but as long as the JPEGs are that bigger it's no option.
so photoshop totally disappointed me yesterday, i spent HRS creating a graphic and i went to save it to PNG, it said i could only save it as a copy; so i clicked ok....my graphic wasn't saved AT ALL!...what am i doing wrong???
View 2 Replies View Relatedwhen im about to save my file *project* nothings happen
View 2 Replies View Related[CS6 Extended]I want to click with the mouse on a symbol (normally it should be I disk symbol I think) to save mychanges instead of use of File->Save or Ctrl+S.
But the problem: I can't find a disk/save symbol in Photoshop andalso don't know how can I get it.On "Window" menu I can't get a word "Save" to checkmark it.How can I get a "Save" symbol in Photoshop CS6 Extended?
Every time I save I get an "Adobe Save For Web Error" that says "Could not complete this operation. An unknown error has occurred." Below is the system info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Mac OS 10.9.0
System architecture: Intel CPU Family:6, Model:23, Stepping:6 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1
Physical processor count: 2
Processor speed: 2400 MHz
Built-in memory: 4096 MB
Free memory: 2139 MB
Memory available to Photoshop: 3490 MB
[code]....
I upgraded to Maverick (Apple OSX) about 2.5 weeks ago. But this problem didn't start until about 3 days ago, so surely that's not the issue.
I have created an action where I do some stuff with the picture and then I save the file to a shared network drive while using the "Save for Web" function. While recording the action everything works fine but when I run the action I got a error that Photoshop can't save the file because the Path does not exist / Is unavailable. It is stuck while he want's to run the "Save for Web" part of the action.
I tried the mapped path (Z:files...) and the UNC path (\fileservusersdjametfiles...) but both did not work.I am using Photoshop CS5 and Windows 7 Professional (64Bit).
Why my photoshop CS6 64 bit in windows 8 can't SAVE and SAVE AS any files?
it's ok for my Photoshop cs6 32bit,but there is not reaction when i use command file->save or file->save as ,also CTRL +S and SHIF +CTRL+S in Photoshop 64 bit
I'm trying to make an action that would perform some operations on images and save them to two different folders (as PDF and as JPG). Here's what my action looks like:
I make a droplet out of this action, and run it on a directory with a bunch of jpg files. However, all files are saved the same two locations: "archivepages_c.pdf" and "archivejpeg600pages_c.jpg".