Lets just say I have this image of this woman. I've painted her completely in greyscale for density means. What ways are there to add skin tone over the greyscale quickly? Is it that I could do several overlay layers of different kinds of skintones over the greyscale image in order to get fleshy tones?
View 3 RepliesI've been working on trying to find the best way to export a variety of different Civil3d objects into 3ds max. The one object type that seems to continue to evade me are pipe networks. Any good way to export these to 3ds max? I don't care about having them dynamically linked so much as rendering the part materials in model as they show up in Civil3d.
View 3 Replies View RelatedI am looking for a variety of camouflage texture fills.
View 2 Replies View RelatedI covered how to transform a image in a variety of ways using different tools and effects and dockers.I felt that I should share some of her talent with her permission.
View 14 Replies View RelatedWhenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies View RelatedI am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies View RelatedI've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies View RelatedI have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies View RelatedHow do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies View RelatedAdobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies View RelatedAny method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies View RelatedI am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies View RelatedI have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies View RelatedWindows 7 and Gimp 2.8.2 in single window mode.
I am trying to to use Colour to Alpha by picking a specific colour from an image. But I can't get the colour picker to work.
The image has an alpha channel.
I choose Colour to Alpha, then click on the From swatch. The Colour to Alpha Colour Picker window appears. I click on the eyedropper. But when I move the eyedropper over the image, the cursor changes to the previous tool that was used. For example, if I used the zoom tool, the eyedropper changes to zoom as the cursor leaves the Colour to Alpha Colour Picker window, and zoom becomes active.
How do I pick a colour from the image?
I would like to be able to select a colour like you can in photoshop. The swatches are very limited. I would like to select it from the colour 'wheel', where you can move up and down the slider to select the value and then move over the circle to select your colour? Or where can I find a huge swatch of colours?
View 4 Replies View RelatedI have found what I can only assume is a bug. I have a PSD file that when opened in CS5 looks as it should. When I open it in CS6 any shape with a gradient overlay displays as black. When I choose Save for Web it displays correctly in the save window, but the file displays the shapes as black in the regular Photoshop view.
View 2 Replies View RelatedI used to use Ps normally, but since I've reinstalled my Windows recently so I had to reinstall Ps as well. However, when I used Gradient Overlay, it didn't work out correctly as it's supposed to do: no matter how I configured the option, it just filled a solid color instead of a gradient (as number 1 in picture). When I clicked reverse, it filled with the other solid color. Number 2 I used Gradient Tools to make it easier to compare.
View 3 Replies View RelatedWe just upgraded at work to CS6 and overlay blending isn't working like it did in CS5.
Overlay used to multiply values below 50% and add screen above 50% regardless of what the layer underneath looked like. I'm not sure what's going on now.
Am I the only one seeing this? Is there a setting somewhere to get it back to working the way it was? I haven't seen any documentation on the change and a search of the support shows no one else complaining about the same issue. But me and my coworkers are all seeing the same issue.
[URL]....the above background photo has those lines over the photo to soften the image's presence as a background photo. how do i do that?
View 2 Replies View RelatedI want to overlay structural drawings at a scale of 1:200 over the site plan which is at a scale of 1:500.
How can I do this and is Photoshop the best software to use? I have the drawings saved in pdf format.
Trying to make Gold text like examples on Google. All use Gradient Overlay. Cannot find it.
View 3 Replies View RelatedI have some text on a transparent background. I want to apply an image over the text so that the image is only within the text lines.
View 2 Replies View RelatedI am trying to over lay an image,
I have one main image and what i now want to do is have a much smaller image, that will overlay the main one and place it in the corner say of the main image, so you can see both images,
I am working with DVDit pro 6.0 and I am trying figured out how to make a background menu and the overlay layer that goes with it.
I am able to make an overlay layer with the following path: Layer/New/Layer and choosing Overlay in the Mode section. The thing that I don't understand is how to work with this Overlay layer .
I understand that the overlay is the subpicture but i'm a little lost. For example, if I have a button which is a picture and I want that the overlay color would be yellow. How to make this work?
Is it possible to create an image that I can then use to overlay images on my website, to give them the apperance of being set to opacity 50%?
View 2 Replies View Related