I have just started to use an Epson GT 1500 scanner and immediately met with a problem in that I can not work out how the preview function operates and as Epson don't appear.
View 9 RepliesI cannot import files from an epson scanner V750 pro. The screen reads unable to read preview. I am scanning B/W negatives using 16 bit Grayscale and tiff image format?
View 2 Replies View Relatedhow do i crop a photo to these dimensions 1500 X 1500 -It's Version Photoshop Elements 9 - (I don't know if they are asking me to crop 1500 mm or Pixels).
View 3 Replies View RelatedFor PS CS6 what plugin do I need to import into PS from my Epson V750 scanner? Does Adobe provide the plugin?
View 4 Replies View RelatedI am on a MacPro....OS X 10.6.8. I am running Adobe Photoshop CS5. I need to be able to run my EPSON 2450 flatbed scanner through Photoshop. But when I go to File > Import > it's not there.
Explain where I can find the TWAIN plug-in, where to load it and how to make it so it shows up under, "Import" so I can operate the scanner through Photoshop.
Just loaded CS5 on Mac 10.7. I downloaded and installed the latest OSX Epson 1640xl scanner software, and also copied the Twain plugin from the Adobe Goodies CD to the Photoshop > Plugins > Import/Export folder.
Rebooted the computer, power off and unplugged my USB scanner, fired it back up, restarted Photoshop, etc. It no longer shows up in Photoshop>File>Import
But Photoshop doesn't see my scanner at all. In fact, the TWAIN plugin doesn't even show up in the plugins folder list. Everything worked perfectly with Mac 10.6 I also took the scanner into a Epson dealer and the scanner works perfectly.
my cs6 does not show my epson scanner in the dialog box as photoshop 7 died.
View 1 Replies View RelatedWhy I can't use my scanner ( Epson Perfection V600 Photo )
View 3 Replies View RelatedI am doing a scan, stand alone, but once the popup comes up to save the scan someplace, there isn't a 'save' button to save it! I have to close the popup and the scan isn't saved. CS4, and epson perfection 4490 Photo.
View 3 Replies View Relatedhaving problems with his Epson Perfection 3200 Photo scanner. He is using Photoshop 7.0. With Photoshop open he goes to 'import' and then clicks on 'Epson 3200 Photo' and he gets the following message
"Could not complete the import command because of a problem with the acqusition module interface"
and then it closes Photoshop. I have uninstalled all of the scanner software and reinstalled it and the same with the Photoshop 7.0 software but I still get the same error message.
I've just loaded debian 7 wheezy with gnome 3.8. When opening the gimp I go to CREATE but only find sane showing the cam ... I think the thing I need is called something like quiteinsane in order for gimp to see the epson stylus XS230 ...
View 11 Replies View RelatedHow can I access my Epson Perfection 2400 Photo scanner after upgrading from PS CS4 to CS6? There is no Photoshop File/Export/Epson scanner listed anymore. I downloaded a TWAIN plug-in and loaded it in the PS Plug-in folder.
View 1 Replies View RelatedI am unable to link my Epson 3200 photo scanner to PS Elements 11 on my new iMac. I have tried downloading the software from the Epson website, but when I load it the nothing shows up. I moved the the Optional Plug-ins > Import Modules TWAIN plug in to the Plug-ins. That had no affect at Photoshop Elements 11>Support Files>Import.
On my old iMac I could link and download files from the Scanner.
Using PS Elements 10 on my Mac OS 10.6 I cannot import images from my Epson CX 7450 scanner. Have had no such problem with PS Elements 8. When I select file, import, the options are limited and the scanner is not listed.
View 3 Replies View RelatedHow do I get Adobe Photoshop CS to show my Epson 3200 Scanner in the list under File Import?
View 2 Replies View RelatedIt did show the Epson Perfection 4870 Photo Scanner.
This is the window that comes up after clicking on File.> Import>WIA Support
The old scanner Epson 4870 Perfection Photo was listed above WIA Support and is still listed on Photoshop Elements 6, which also shows the V600, but, not Photoshop Elements 9 ?
Ps.This is a little frustratimg, it appears Premiere Elements 6 although older works far better, in the monitor and shows the V600 immediately in Pro mode ,just as well it was a free addition with the Epson Scanner.
I converted my operating system from Windows XP to Windows 7 and I cannot get my Epson Perfection 4870 photo scanner to work with it. I downloaded the driver and it took, but my scanner does not appear in Elements 11 as an import. I used Elements 3 and 7 before and these worked fine with the scanner.
View 4 Replies View RelatedI just upgraded from Photoshop Elements 6 to Elements 11 on a brand new iMac running OS X 10.8.2, but Elements 11 will not recognize my Epson Perfection 4990 PHOTO Scanner as an option to import from when I click on "File" then "Import." Is there a Plug-In that may be missing for this to operate as it used to in Elements 6 running on an older G5 Non-Intel processor? I don't have the new Elements 11 Disk to copy anything from, since I downloaded the program directly from Adobe.
View 1 Replies View RelatedCorel X4, still installed on my PC, has no problem at all.But Corel X6 (CorelDRAW as well as CorelPHOTOPAINT) crashes after the preview scan with Epson Scan (EPSON Perfection V330 Photo) in professional mode. When I use the simple mode (which does all automatically: preview scan, border recognition, best guess about resolution and color mode and the final scan) there also is no problem.
But I wonder what the TWAIN driver does with Corel X6 after having finished the preview scan ..I already tried to uninstall and reinstall the (latest) driver suite from EPSON without success.
I'm working on my dialog for editing iproperties again and I'd like to make it preview the output of a function. We like using functions in the description for calling out material sizes using parameters. So I have my dialog get the function in the description iproperty, but if you don't know what parameters are what it can be hard to work with.
I'd like to show the evaluated description function so it's easier to work with.
Description function
=<G_H> x <G_W> x <G_T> S.S. TUBE x <G_L>
Evaluated description shown in BOM
4.00 in x 2.00 in x 0.19 in S.S. TUBE x 21.00 in
I know it'd be possible to set the iproperty and get the evaluated version after setting it. But if the user cancels out of the dialog that change would have to be undone, which would require storing the original value and resetting it on cancel. Is there a way to evaluate the function without setting it first?
I'm trying to change the Hue on 80 layers but have had no luck anywhere.
I have all layers linked,
I have all layers grouped,
I have all layers selected,
I have all layers in their own folder,
I have all animation frames selceted,
and the ONLY thing it will let me GLOBALY change is the gamma.
I have been trying for over a week to install Elements 12 for more than a week. I keep getting error code 1500. I will return Elements 12.
I have found Adobe products to be particularly sensitive to almost any anomoly that a computer, internet connection, or software conflict creates will cause their products (many versions of Elements and Adobe Acrobat) to hickup and not work.
I haven't used AutoCAD for seven years and when I did use it, it was for mechanical engineering purposes. Now I am using AutoCAD LT for architectural reasons. I've signed up to my local night school to get back into things.
I am making a location plan for a planning permission application to the local authority. I bought a 4 hectare or so location plan from the Ordinance Survey. I've drawn in the location of the proposed building and changed the relevant site boundaries to red and blue.
Now I want to use two layout tabs with a drawing border at a scale of 1:1250 and 1:1500 respectively. The existing scales appear to be in imperial units.
How can I change this?
When I run my production sheets I'm only seeing 1300 feet of my profile and I like to see 1500 feet of my profile at 50 scale. Is there a way to show 1500 feet of profile?
View 9 Replies View RelatedThis seems absolutly silly.
(setq p1 (getpoint))
(setq p2 (getpoint))
(setq Dist (distance p1 p2))
Why does this not work?
I'm trying to build a command to replace AutoCAD's "DI" command, to give distance and delta x, y, and z values in decimal and imperial, and keep the angles in XY plane and out of XY plane.
I'm trying to be able to have a function run another function with the secondary function being passed as an argument to the first. I'm trying to create a recursive function and the recursive part works great. I just need to be able to have the recursive function run other functions to actually do stuff.
Here is something I found that should do what I need, mainly run a function from a function name in a variable.
Sub test() Dim ftnName As String Dim argument As String Dim result As String ftnName = "myFunction" argument = "cat" result = Application.Run(ftnName, argument) MsgBox resultEnd SubFunction myFunction(inString As String) As String myFunction = inString & " has " & Len(inString) & " letters."End Function
However I get the error "object required" on the "result = Application.Run(ftnName, argument)" line. So I'm guessing the Inventor VBA doesn't like this method of doing this. I'm just hoping there is a way to do this or this function will be useless or reduced to hardcoding functions which still defeats the purpose.
A feature notably absent from the Oil Paint filter is any way to temporarily disable the effect (e.g., not preview it).I happen to like using Oil Paint to make refllections in the surface of water smoother and more "liquid" (which involves turning off the "Shine"), and it would really be nice if I could easily gauge the amount of the effect easily by blinking back and forth between original and processed image with a quick "disable preview" functionality.
With most standard filters, one can either uncheck a [ ] Preview box, and/or click the mouse button down on the image to temporarily show what the image is like without the effect.Yes, I know I can turn the Stylization down to 0.1 and see how a very minimal amount of the effect can be applied. And I can look at the original image in Photoshop proper, but of course that can't be zoomed while the Oil Paint filter is active.
Also, the zooming / panning seems kind of stiffly implemented.In summary, the more or less standard and expected filter features I'd like to see added to this (new class of) GPU-accelerated filters are:Preview/No Preview capability. It doesn't have to update Photoshop, just the preview display in the filter itself. I suggest a [ ] Preview checkbox and/or an on-mouse-click temporary effect disable.
Modal click and drag Zooming vs. Panning - i.e., based on a Zoom or Pan function selected (e.g., via an icon along the left) vs. having to hold modifier keys down. I personally would want it set to Zoom by default, not Pan. Since the filter has scroll bars (a Good Thing), I would have thought Zoom would have been a better default as it is. I have implemented these things in my own GPU-accelerated plug-ins, so I know that all the infrastructure Adobe needs to support them is already in there. These changes are controls only and should be trivial to implement.
the Adobe products in question are CS3 & CS4 PhotoShop - i upgraded my Mac from 10.5.8 to 10.8.2 - i use a Epson Perfection 1640SU stand alone scanner - in 10.5.8 my scanner would always show in the Menu (Menu > File > Import > Epson Prefect 1640) - after i upgraded - it disappeared - i went to Epson’s site to get their latest driver for 10.8.2 - it direct me to go to Apple’s Store for their latest updates - i had no new updates listed at Apple Store - i called Apples help line - they directed me to one of their sites for the latest Epson driver for 10.8.2 - i installed the update - went to PhotoShop 3 & 4 - and again the scanner didn't show when I went - Menu > File > Import > (No scanner listed) - i called Apple back - told them the problem - they said for me to contact you (Adobe) since it was your software to see if you have any Plug-Ins for Epson Scanners running on OS 10.8.2.
View 1 Replies View RelatedI recently bought a Nikon D7100. I took some test shots and imported the images to Lightroom 4.4, then generated 1:1 previews for all the images.
Previews zoomed to 1:1 in Library Mode are noticeably soft. The image below is a screen shot of the Library preview:
Moving to Develop View produces a higher-resolution 1:1 preview. The image below is a screen shot of the Develop preview:
Look at the bricks and window screens to see the difference.
This difference occurs immediately after import (with a User Preset applied during import). Once any Develop work is done, the Library preview updates and displays at full resolution.
This problem makes doing initial editing/selection of images time consuming, because I can't determine the sharpness/quality of imported images until I've done some kind of Develop adjustment on each image.
I'm trying to edit a set of titles made in Premiere in After Effects, and after I import the file (as a Premiere file) then load the sequence into the timeline; the preview is just a black screen throughout the entire preview. The titles never show up.
View 2 Replies View RelatedI've tried installing a CanoScan Lide 200 scanner to be used with Photoshop CS6 but can't seem to make it work. I downloaded the two latest drivers available on Canon's website and installed them but it hasn't worked.
View 1 Replies View Related