1/ On a non-English keyboard, some shortcut keys like [, ] and ~ can only be reached through the AltGR tab, and are therefore useless. Is it possible in CS to make one's own shortcuts for brush size etc?
2/ Does the histogram tool live-update when one uses tools like Levels or Curves?
3/ Are we still met by that backwards compatibility popup when we save?
4/ Do the precise pointers for brushes still hide on greyish works, forcing one to press the spacebar to see where the cursor is?
5/ How well is 16 bits really implemented? Case: Can I, in 16 bits in CS, duplicate an RGB image, switch the copy to LAB, copy the lightness channel to the clipboard and paste this in the original in an alpha or a layer mask or on a new layer?
6/ Do all filters work in 16 bits mode, and if third party ones don't, do they still work in PS? Filters like KPT3 (remember the problems with 7), Xaostools, ..
I have 90K items in my PSE11 organizer catalog. I'm running Win8 and I'm getting nervious that catalog size will become an issue. Backing up the catalog is cumbersome since it is 337G. If I need to break it up into smaller pieces, what is the best way to do this? Is there a bridge or link between catalogs?
I realize that there is no preset limit in the number of images that can be saved in a single (Lightroom 4) catalog but I need to know that given a well equpped PC (system with 2 sockets/8 cores, 8+GB of memory and plenty of fast hard drive), how many images can be _reliably_, and with acceptable performance, kept in a single catalog ?
So far I have been maintaining 1 catalog per year for my images but creating collections or galories that span over several years has become a pain so I am considering consolidating all the catalogs into one, which would then contain well over 500k photos.
I am a software type and am aware that the LR implementation does not impose internal hard limits on the individual dimensions it deals with but I would like to know:
- What are the sizes of the catalogs that the software is being stress-tested with before it is released (rough numbers would do)
- Is it possible that an internal _incoonsistency_ could be introduced in a part of the catalog that would go undetected (by the global consistency checking) and would only surface when you try to access that area which may not have been touched for many years (in other words is it possible for the catalog to become _partially_ corrupted and yet pass the (checksom-like ?) verification that takes place when the catalog is being backed up ?)
- and, in case it matters, there are mostly raw images, ranging form 10 to 50 mega pixels each (not that these should impact the size of the catalog.)
There are some questions I have about screen redraw in CS4. First off screen redraw without GPU acceleration is much slower than in CS3. In the "advanced options" of the GPU settings there is the option "color matching".
If I turn it off I don`t have the option to softproof anymore. That is turning softproof on or off doesn`t change the colors anymore. If I turn it on, I can softproof again but I get banding in a black to white gradient. Slight, but noticable. To see the diffenrence that the settings make you have to close and open the document again.
I have both ImageReady and Photoshop but have never got the chance to actually tinker with any of them. Now, however, after seeing how much the programs can do, I really want to go serious with the programs. So I have a bunch of questions:
1. Photoshop, is it a generally easy program to learn?
2. Do you need to buy a book/tutorial or any of that stuff to really handle Photoshop or can you just tinker with the program and in a few months be able to handle it like a pro?
3. How do you add a border to an image using Photoshop?
4. How do you add letter or even a sentence in an image using photoshop?
I have noticed some annoying things about initial interaction with PS that I wanted some quick feedback on:
* I know PS can not use layered PNG. Is there any tool out there that can convert these to PSD with layers intact? I have a ton of old work that is in that format and will cry if I have to recreate everything.
* I noticed that the select tool is very picky in PS. If I am working on a layer or object, I can not select out of that object to activate another layer or object. I have to confirm changes (annoying pop up) and select the object or layer from the layer panel....EVERY TIME. Is there a way to change this behavior?
* The text tool is defaulted to show in PT. Is there a way to change this to default in pixels? I am using Photoshop for the web in most cases, not print.
* The status bar (bottom left in Mac) can show document dimensions, but it is always in inches. Can I change this to pixels?
1) is there a way to "save for web" only user slices? without the auto slices? 2) is there a way to 'copy' the slices (all of them together) from one file to another?
With my new Wacom I'm really getting into more experimentation with brushes, which led to several questions I'm hoping you'll help with answers or clarifications.
1. Based on what I've read it appears that I can create any number of brush sets for myself using an existing set as a model. If this is correct then I'm assuming that I can create these setss for most used or any other category? Do I understand this correctly?
2. In creating the new brush set, I think I read that I need to "delete" the brushes in the set but that they will not really be deleted? Is that so or should I make a copy first?
My PS is starting to get a little out of control and I hope one of you guys can steer me in the right direction with this.
I do quite a bit of stuff in hi rez (300 dpi) switching back and forth between actual pixel view and fit on screen modes. Recently my "fit on screen" mode wants to keep getting bigger and bigger and no longer snaps back to the correct screen size. Does anyone know how I can fix this?
The other question should be pretty simple. I want to change the default blending options. Things like stroke, inner and outter glow color etc.
At the bottom of the document window, the information displayed seems to only be able to show one item, is it possible to show multiple items avoiding clicking on there to cycle through them all to see the information?
Why is my image showing 732K in the document information, but mousing over it while it is closed showing 69K. Am I misunderstanding the file reading size, i.e. 1048 bytes is 1mg?
Can you get certified on any version of photoshop or do you have to start at Photoshop 1.0? Once you're certified does your certificate "expire" ? Do you have to retake a test? If so how often?
I'm not well versed in color matching so I use an application called Color Wheel Expert to help me choose matching colors and what not. For awhile I've tried to figure out how I can accomplish the same sort of thing simply using Photshop's color Palette/Picker, but haven't been able to figure it out.
Is there a simple way to determine a color's complement, triad, etc while selecting a color? What about getting 'shades' of a particular color? I know you just add white to get shades, but how do you accomplish that inside the color picker?
I think I fully understand what levels are, and I no longer just mess with the sliders til I get what I want. I know what each does and how to use the ALT key modifyer to detect clipping. But I got some questions about other Photoshop (*choir sings*) features..
I don't understand what these are. Are they like levels for colors? I notice there is a Red, Green and Blue curve adjustment, but I'm not sure what it does and how to read the graph where I put dots and curves on to modify the Color Curve.
I am trying to create a web page with a header similar in shape to the one pictured below. I plan to use PS6/Image Ready to create the background and nav system , then slice it and add text w/tables and html. I've tried using the pen tool to draw the header, but then I can't fill it. Can anyone suggest a good tute or point me in the right direction?
I have a JPG image that I want to edit with photoshop 7. I know that if I edit directly the JPG image and save again as new JPG image, the quality of the new saved image will be degraded. Experienced user know that because JPG is a lossy format.
I want to retain the quality of the edited image. Then I heard that the TIFF format is a lossless format that support compression.
I am creating a quiz in edge with 10 levels - each level asks a question dealing with a particular topic for that level. To make it more challenging/random, I want to allow each level's question to pull from a pool of 2-3 possible questions for that particular level (rather than one general pool for all 10 questions).
I have created symbols out of each question - and played with a few randomizing options - but I am a tragically front-end designer
I've just got a job in that requires file names including a full stop (8.6 for instance). This was never a problem with my old version of Adobe but now, if I save a file like this it then becomes unrecognisable to Adobe when I want to re-open it. Yeeeeeek this is not good.
Second question actually applies to any version of Adobe I've sampled after my lovely 5.5. When you use CTRL T to free transform, for instance, you get the litte tabs appear that you can click and drag for manipulation.
In 5.5 the tabs would appear at the edge of the file window even if the actual size of the layer was way bigger than this window. Now they appear around the layer rather than the window so, as the layer is usually a lot bigger, I have to keep zooming out of the file just so it becomes small enough within it's window for me to be able to see and use these tabs. I hope that makes sense - rather hard to describe. This is driving me mad and I'm wondering if there is a setting I can use to change this.
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
when I got my first Macintosh IICX and all of my MacPaint clip art. I don't want to get rid of the clip art because since I'm still using a black ink printer and not upgrading to a color one, the clip art looks nice in newsletters and the like.
Up until this time I had been using SuperPaint which had the New Superbits editing plug-in to refine the pictures so they had the smoother and cleaner lines instead of looking jagged. With my new computer and printer, I'm also getting Photoshop CS packaged with Adobe Creative Suite Premium, which I have never used before. Since I have not received my order yet, I was wondering if anyone could tell me whether Photoshop has the capability of improving the older MacPaint clip art like SuperPaint did with the New SuperBits editing plug-in. Over the past two days, I have been trying like crazy to back-up my pictures with SuperPaint and then re-saving them with Graphic Converter. It's been so incredibly slow that I thought I would go ahead and ask you, the experts, if Photoshop can also improve the quality of my older MacPaint clip art or if I should continue to back-up my clip art like I have been doing.
I have just got back from the Elbow gig and pulled the images off the card. They load up in Bridge but don't have actual picture thumbnails. They are named correctly, ie: IMG_3483.CR2 but they won't open!? Error message says 'Could not complete your request because Photoshop does not recognise this type of file'
I could see them on the back of the camera.
mac users... i did a software update the other day and I noticed that there was an update for ACR. Could it have been something to do with that? And why can't I find ACR in my Applications?
I use Photoshop Elements 11. I am trying to upload photos to a website and the browse only goes to Windows/Pictures. How do I navigate to photoshop to upload pictures there?
of Adobe Photoshop v6.0.1 (quite old, I know, but it do all I want and on my old HW I did not plan/want to use any more recent version, because they are HUGE and with just a little preferences trick, I did not need to reinstall my PS - ever ), yet as Czech user, I need my software to type some special characters as well. These are looking like this:
[URL]...
Now the only problem is, that some of them PS just refuse to type. Seven small and seven caps are just wrong. See the line "for PS:"...
I battled the problem even by editing the fonts itsels, because that seems to work with Adobe Illustrator, yet this also cause the edited fonts to be useless in another programs. So I looked deeply and in the Adobe settings in directory Fonts / Reqrd are directory CMaps and perhaps editing the character map used will be better and usable solution? how to do it or even determine with file from the 96 files in the CMaps directory are right now used by Adobe Photoshop?
Everytime I open my CS6, it always show " Could not initialize Photoshop because the preferences file was invalid (it has been deleted)" I reinstalled it but it is still popping out.
when I try to save a tagra file with a alpha channel in photoshop 7 the box for the alpha channel is greyed out, with an warning sign next to it, and the line below stating "file must be saved as a copy with this selection" When I examine the saved file the alpha channel is not there!
Has anybody got any idea why?
My old version of photoshop 6, allows you to save alpha channels!
the soft edge feature of the eraser and the brush no longer work. I can go into the pallet and choose a soft edge eraser or brush, but it comes up hard edge. When I try to use the marquee box with a feather to get a soft edge, I again get a hard edge. I've used this technique a lot, so I think I'm doing the method properly. I have removed the preference files a number of times and have trashed the old Photoshop and reinstalled Photoshop 3 or 4 times,
I am working on someone elses computer and the Software settings are different. The old owner does not use this computer anymore. The swatches are set and I would like it to function how it usually does, etc. I mean, even the transparent swatch on the tool bar is not there anymore, so when I use the pen path tool, I get these white and black fills which makes it difficult for me to see the path I am meant to be following.
How do I reset Photoshop so that I can customise it the way I want it? Reinstalling the softwares is not an option.
I would like to reset Illustrator, Indesign, Dreamweaver, etc.
I'm having trouble with my zoom tool. If I have multiple Photoshop windows open, when I go to either zoom in or out of the top window... ALL the other windows mirror what's happening to the top window.
I am having in Photoshop CS2. I have had CS2 for over 2 years and have never had this problem. I am not able to open Photoshop CS2. I am getting a message that reads "Could not initialize Photoshop because a required resources text file is missing. It goes through a series of " could not load default contours, styles, custom shaphes because the file could not be found" before getting to the "initialize" window.
