Photoshop :: Photoshop In CS3 Is Not Launched On Win...
Apr 3, 2008
I successed to install CS3 on Win 2003 standard 32bit with Application Verifier.
Only Photoshop could not be launched after installing. Illustrator is OK.
After restaring the server, error message about Photoshop has been listed
on the display which shows "Adobe Photoshop CS3 encountered a problem and
needed to close" and like "send an error to Microsoft".
In the meantime, I tried to be launch it, its frame and sand clock were
displayed but sand clock was disappeared in another moment its frame also
was disappeared on the screen and added error log into the event log.
Event log says that "Faulting application Photoshop.exe, version
10.0.0.0, faulting module Photoshop.exe, version 10.0.0.0, fault address
0x00*****".
View 1 Replies
ADVERTISEMENT
Nov 12, 2012
I downloaded Photoshop trial 64bits it itstalled ok but when I try to launch nothing happens I'm using windows 7 Ultimate.
View 22 Replies
View Related
Oct 14, 2012
I have recently installed Photoshop CS6. I already had Photoshop Elements 8 on my PC. Before installing CS6, I could quite happily scan photos etc via my scanner, from within Elements 8, but now when I go 'File > Get Photos and Videos > From Scanner' within Elements 8 (with Photoshop CS6 not open at the time, incidentally), I get a message saying 'Software for this device could not be launched. The device is not connected or is busy'. I would like to be able to scan from either Photoshop applications.
View 12 Replies
View Related
Aug 25, 2013
I get message "the file could not be edited because Adobe Photoshop CS5 could not be launched." "Some of the application components are missing from the application directory. reinstall the application."
I have reinstalled from my disk three times but still get these messages! How do I correct this problem?
View 4 Replies
View Related
Mar 1, 2014
I've been using Elements 11 on my Pc (Windows 8) for ages with no problems, but in the last couple of days, almost everytime I launch Elements it will automatically switch from Expert to Quick.
View 3 Replies
View Related
Sep 6, 2013
I made a Photoshop® script (action) which works perfectly. (Open .PDF files in Photoshop®, to after save them as .JPG files into another folder)
The problem comes when I launch a batch process. It takes a while to the computer to open the large .PDF files, and when a file is opened, well it doesn't go through the whole script. In fact, Photoshop® already open the second file and so on. Then without running the rest of the script/action .
View 2 Replies
View Related
Mar 21, 2013
I have a user using Windows 7 Pro 64-bit having issues with Adobe Illustrator CS5.5. When the user attempts to open .ai files stored on her local machine, the files will not open if Illustrator is launched. It will show an hour glass briefly as it is about to open, and then nothing happens. If she closes Illustrator and tries to reopen the same file, it will launch Adobe Illustrator and the file will open. She can also open files through illustrator. It just wont open .ai files when illustrator is already launched. This is happening when she is running illustrator as an adminitrator, and as well as when she is not an adminitrator.
View 1 Replies
View Related
May 17, 2013
I select image in LR2.7 to edit in PS6. It launches PS6 but image does not come through. It comes up with message "the file could not be edited because CS6 could not be launched" when in fact it has launched CS6 but not the image.
I have uninstalled LR2 a few times and reinstalled it and when I leave LR2 I can select image to edit in CS6 and it works okay but when I update on Adobe website to LR 2.7 it starts to play up and not work.
View 10 Replies
View Related
Jun 7, 2012
I'm looking for an API function which would identify the version of Autodesk Inventor that has been launched. The code I"m using to start Inventor is:
CLSID clsid;HRESULT hres = NOERROR;CoInitialize(NULL);hres = CLSIDFromProgID(OLESTR("Inventor.Application"), &clsid);if (hres == S_OK){hres = aiApp.CoCreateInstance(clsid, NULL, CLSCTX_LOCAL_SERVER);if (hres == S_OK) aiApp->Visible = VARIANT_FALSE;}
View 3 Replies
View Related
Nov 2, 2008
Version: Photoshop CS (1)
Computer: Pentium 2.4 gHz dual core
4 Gigs Ram
Nvidia 7950 video card Win XP Home
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
View 3 Replies
View Related
May 28, 2004
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies
View Related
Jun 7, 2004
when I got my first Macintosh IICX and all of my MacPaint clip art. I don't want to get rid of the clip art because since I'm still using a black ink printer and not upgrading to a color one, the clip art looks nice in newsletters and the like.
Up until this time I had been using SuperPaint which had the New Superbits editing plug-in to refine the pictures so they had the smoother and cleaner lines instead of looking jagged. With my new computer and printer, I'm also getting Photoshop CS packaged with Adobe Creative Suite Premium, which I have never used before. Since I have not received my order yet, I was wondering if anyone could tell me whether Photoshop has the capability of improving the older MacPaint clip art like SuperPaint did with the New SuperBits editing plug-in. Over the past two days, I have been trying like crazy to back-up my pictures with SuperPaint and then re-saving them with Graphic Converter. It's been so incredibly slow that I thought I would go ahead and ask you, the experts, if Photoshop can also improve the quality of my older MacPaint clip art or if I should continue to back-up my clip art like I have been doing.
View 2 Replies
View Related
Jun 17, 2008
I have just got back from the Elbow gig and pulled the images off the card. They load up in Bridge but don't have actual picture thumbnails. They are named correctly, ie: IMG_3483.CR2 but they won't open!? Error message says 'Could not complete your request because Photoshop does not recognise this type of file'
I could see them on the back of the camera.
mac users... i did a software update the other day and I noticed that there was an update for ACR. Could it have been something to do with that? And why can't I find ACR in my Applications?
View 3 Replies
View Related
Apr 29, 2013
I use Photoshop Elements 11. I am trying to upload photos to a website and the browse only goes to Windows/Pictures. How do I navigate to photoshop to upload pictures there?
View 3 Replies
View Related
Oct 30, 2012
of Adobe Photoshop v6.0.1 (quite old, I know, but it do all I want and on my old HW I did not plan/want to use any more recent version, because they are HUGE and with just a little preferences trick, I did not need to reinstall my PS - ever ), yet as Czech user, I need my software to type some special characters as well. These are looking like this:
[URL]...
Now the only problem is, that some of them PS just refuse to type. Seven small and seven caps are just wrong. See the line "for PS:"...
I battled the problem even by editing the fonts itsels, because that seems to work with Adobe Illustrator, yet this also cause the edited fonts to be useless in another programs. So I looked deeply and in the Adobe settings in directory Fonts / Reqrd are directory CMaps and perhaps editing the character map used will be better and usable solution? how to do it or even determine with file from the 96 files in the CMaps directory are right now used by Adobe Photoshop?
View 3 Replies
View Related
Aug 21, 2012
Everytime I open my CS6, it always show " Could not initialize Photoshop because the preferences file was invalid (it has been deleted)" I reinstalled it but it is still popping out.
View 10 Replies
View Related
Mar 8, 2004
when I try to save a tagra file with a alpha channel in photoshop 7 the box for the alpha channel is greyed out, with an warning sign next to it, and the line below stating "file must be saved as a copy with this selection" When I examine the saved file the alpha channel is not there!
Has anybody got any idea why?
My old version of photoshop 6, allows you to save alpha channels!
View 4 Replies
View Related
Mar 21, 2007
the soft edge feature of the eraser and the brush no longer work. I can go into the pallet and choose a soft edge eraser or brush, but it comes up hard edge. When I try to use the marquee box with a feather to get a soft edge, I again get a hard edge. I've used this technique a lot, so I think I'm doing the method properly. I have removed the preference files a number of times and have trashed the old Photoshop and reinstalled Photoshop 3 or 4 times,
View 2 Replies
View Related
Dec 29, 2008
I am working on someone elses computer and the Software settings are different. The old owner does not use this computer anymore. The swatches are set and I would like it to function how it usually does, etc. I mean, even the transparent swatch on the tool bar is not there anymore, so when I use the pen path tool, I get these white and black fills which makes it difficult for me to see the path I am meant to be following.
How do I reset Photoshop so that I can customise it the way I want it? Reinstalling the softwares is not an option.
I would like to reset Illustrator, Indesign, Dreamweaver, etc.
View 1 Replies
View Related
Aug 24, 2006
I'm having trouble with my zoom tool. If I have multiple Photoshop windows open, when I go to either zoom in or out of the top window... ALL the other windows mirror what's happening to the top window.
View 5 Replies
View Related
Feb 19, 2008
I am having in Photoshop CS2. I have had CS2 for over 2 years and have never had this problem. I am not able to open Photoshop CS2. I am getting a message that reads "Could not initialize Photoshop because a required resources text file is missing. It goes through a series of " could not load default contours, styles, custom shaphes because the file could not be found" before getting to the "initialize" window.
View 3 Replies
View Related
Aug 24, 2002
I scanned a picture on Microtek scanner and was tranfering it to photoshop when I saw photoshop embeded profile mismatch that has use the emdeed profile or covert document's color
in the working space or discard the emdeed profile. which embeded profile do you use for the photos? I attached the shot of the embeed profile from photoshop.
View 1 Replies
View Related
Jan 2, 2008
After scanning and opening a paper doc in Photoshop the image is distorted- ie its because i usually scan photographs for manipulation, i know this is due to scanner settings but i don't know how to change them there.
View 2 Replies
View Related
Jul 4, 2007
I have to build a website named Hollywood Movie Wallpaper . I've already gotten the pages done using adobe photoshop. This means that I know exactly what I want on each page and I've done the whole page by adobe photoshop. However, most website host needs the file to be in html in order for it to appear on the web. Is there any way to change an adobe photoshop image into a html file without changing the layout or anything? Coz it was hard work designing the layout and inserting the content into adobe photoshop image.
View 4 Replies
View Related
Mar 17, 2014
A co-worker needs to be able to access certain files that I have created in Photoshop CC. These files are saved as TIFFs, and as part of my workflow, I have just about everything in Groups. She currently has Elements 10 on her system, but that absolutely does not permit access to the Groups and the components within. Because of her job duties, I cannot necessarily justify adding her to the CC account since she does not need PS, AI, ID, or any of the other applications as I do. However, I can easily justify upgrading her to Elements 12...provided it does what we need it to.
View 1 Replies
View Related
Dec 18, 2012
Just downloaded Elements 11 and am extremly disappointed. What is the oldest version of Photoshop that I can run on Mountain Lion?
View 1 Replies
View Related
Apr 16, 2013
any editing I do in photoshop will now seem to need to be manually added to Lightroom...which I do not even want to contemplate. When I rightclick on an image and select Edit in --> Photoshop CS6, nothing happens...Photoshop does not open as it used to. I'd thought it might be Nik Collection trial or OnOne photo suite trial I'd installed, but I uninstalled both and restarted my computer, and the problem still exists. I'm using the current creative cloud version of both lightroom and photoshop.
View 1 Replies
View Related
Aug 4, 2013
i am going to design a Logo for one of my client. the logo will be like an rounded shield. URL....i can write the text on upper side of te shape which is "Center for Employment Training. Please see the image. on image where this text is written on bottom of shae "Skill Training. Human Development" how to write that text . i tried to wrap the text using Arc option but the text goes stretched.
View 2 Replies
View Related
Aug 15, 2012
When I use the spell checker in Photoshop CS5 to check a text layer, it always tells me there are no errors, even when I know there are, so it's a useless exercise. Where is the spellling dictionary installed, and how do I make sure it's working properly?
View 2 Replies
View Related
Jan 21, 2006
I currently use Photoshop CS2, but I also encountered this problem on Photoshop Elements 4.0.
Whenever I am working in Photoshop, my blue looks purple, my red looks orange, but my green seems ok, however when I save it, the colour is different. I know it is not the gamma because that affects everything, not just how Photoshop looks (I'm pretty sure). If someone could help me and tell me how much of a loser I am and give me some simple solution, that would be great because it's a pain not being able to see what it is really going to look like without saving it and looking at that.
Here is what I am talking about, a screenshot and the saved .png: ....
View 2 Replies
View Related
May 13, 2004
actually, it's the lack of anit-aliasing whenever I use the 'Free Transform' tool.
Is there a button that toggles aliasing on and off?
Thought I knew Photoshop well, but after scouring the preferences and what-not, I'm stumped.
View 2 Replies
View Related
