actually, it's the lack of anit-aliasing whenever I use the 'Free Transform' tool.
Is there a button that toggles aliasing on and off?
Thought I knew Photoshop well, but after scouring the preferences and what-not, I'm stumped.
I am trying to transform a sprite which is about 32x32 and while using Photoshop's free transform tool to size it to something like 600x600 it becomes horribly distorted (thanks to the anti-aliasing). I need to turn it off while transforming, yet I see no option.
View 1 Replies View RelatedHow can i turn of the anti aliasing with the line tool.
I use Adobe Image ready cs.
How do I turn off anti-aliasing for the pencil tool in Photoshop CS6. I want to draw a single pixel. I do not want to draw a shape or a line. I do not want additional low-opacity pixels on either side.
I set the pixel size to 1 and hardness to 100%. The pencil tool produces an anti-aliased line. I do not want this.
i just made an outline of a drawing with the pen tool. I finished and i started coloring the image and noticed that the Anti-Aliasing was on during the time i did the outline so now i have a border around where i filled in color that's transparent.
Is there any way (shy from doing the outline all over again with the "anti-aliasing" box un-checked) that i can just turn all those lines to non-anti-aliasing lines?
In this example I did the following
1. used the circle marquee and did a 8 point stroke.
2. Selected the circle with the magic marquee to get an active selection
3. Gradient tool
Doing the above results in jagged edges that alias badly once I fill the selection with the gradient. With a basic color the circle is perfeclty fine, only once I add the gradient the edges become jagged. How might I fix this?
I scanned some text hand-written with a magic marker. i use threshold to get the artwork plain black and white, select the white with the magic wand, select similar and then delete. i'm left with the solid black image with crisp edges. i have marquee tools, lasso tools, and magic wand set to anti-aliasing off. feather i set to 0.
when i rotate the image to make it level, the image gets anti-aliased. to try to correct that i select the pixels of the image with command click on the layer, delete that layer and make a new layer. then i just have shape of the image created by the selection tool. when i use fill to try to fill it in, the image is anti-aliased. all i want to do is fiil in exactly inside the shape that i have selected.
The Text tool has options for anti-aliasing - Strong, Crisp, etc. Is there anything similar when filling paths?
I am filling two paths with a common edge; when the Anti-alias box is un-checked, the border looks ragged, but when the box is checked, the border looks grey. I can get the results I want by filling twice with anti-aliasing turned on, but I would like to have the box "Half-checked".
Photoshop worked completely fine until four days ago; now whenever I try to write text it is jagged and not anti-aliased in vector form or once rasterised.
View 1 Replies View RelatedI've just set up CS4 and my brushes are not anti aliasing properly. There are no soft edges on any of them. I'm able to get a pressure sensitive opacity change on the stroke but the edges are all pixelated.
Here is an image (this is a soft brush. notice none of the feathering/anti aliasing is there): ...
I'm trying to enlarge a small section/layer WITHOUT the anti-aliasing and I can't for the life of me figure out how.
I've checked the help files but to no avail.
I'm using Photoshop CS 8.0.
I'm looking for a way to do some anti-aliasing on my drawing. I have a drawing that I scanned in and I cut out a few components of my scan in MS Paint. I did this by drawing the outline manually in one color and then coloring the background with that same color and then copying it with that color as the see-through color. The problem is that the contours look terrible on a black background since MS Paint can't help with anti-aliasing. Instead, I've got these cut-out drawings of objects with a thin white glow around them. That is, when I cut them out, it was extremely hard to move along the lines EXACTLY. I tended to cut more outside the lines than in, and so I took a lot of the white background with it. I need a way in PhotoShop to get rid of those white lines and then do some better anti-aliasing. How can I do this?
View 1 Replies View RelatedI'm copying some vector art (monochromatic flats) from Illustrator and pasting into Photoshop as Smart Object. I am making selections from the flats to create individual paths to color however the edges aren't lining up. I end up with gaps between the edges and the lines are jagged.
Can someone please explain anti-aliasing? I am following a few video tutorials, one is saying turn it on and the other says to turn it off.
[URL].........
In the above picture you can see alternate options under text aliasing called Windows LCD. These only became visible to me after removing a GPU and all drivers, but with a new GPU it is still present?
My question is, how do you get this aliasing option as a default?
Edit: Bottom text is using Sharp aliasing.
When I create a rectangle shape the edge is blured slightly with one pixel of color. How do I make sure the rectangle is sharp? I cannot find the option to click off anti-aliasing on the option bar in CS4, anyone know where it went?
View 3 Replies View RelatedI have noticed that the custom shapes are very jagged around the edges and I can't seem to find an anti-aliasing option for them.
I'm trying to use the "CheckMark" shape presently.
Is there a way to get nice smooth shapes? I didn't see anything about this in the help files.
Is there a way to draw a shape WITHOUT anti-aliasing? It doesn't have the option like all the other tools. I've wondered this for years but never bothered asking anyone.
View 1 Replies View Relatedi have an image that i can select with the Magic Wand Tool (W). Only problem is the image is kinda jagged around the edges... my question is, how do I make the edges smooth?
View 2 Replies View RelatedI hope you understand what I mean but, when I make a selection and fill it the edges are not antialiased, it's really annyoing and I can't figure out how to get smooth edges.
View 4 Replies View RelatedWhen ever i save an image in photoshop it gives be a border of transparency...
How do i stop this?
I am trying to create a large image out of lots of smaller images but with this border it shows up very clearly...
Do draw a simple curved line: pen tool, then stroke with a brush, correct?
- line on left is stroked with a brush 2px max hardness
- middle line is stroked with pencil 2px, no anti aliasing (no option either?)
- arrow on right is what I'm aiming for! smooth, but not blurred, its the same thickness as the others.
Now, I actually drew the arrow, but can't remember how - do you see what I mean? There should be a happy meduim between the left and right curves, to get the arrow. I can't find it! the anti aliasing is still heavy, even on max brush hardness, and the pencil is too far the other way.
I really like the new font anti-aliasing modes in Windows, but i got one big problem: If i rasterize text its gets a bit thicker and lose all it's touch.
Here's an example: (rendering was: sharper. the top one is the non-rasterized text. looks a lot better). Test it on your own... just zoom into your type and rasterize it, then you see how its gonna change.
Whenever I type in Photoshop for the last few months, all the text is pixelated and blurry. The problem is impervious to anti-aliasing and resolution changes. The only difference is that with anti-aliasing the image is blurry and pixelated and without, it's just extremely pixelated. Why this problem started, I have no memory of changing a setting that would have caused this.
I've done everything I can think of, including re-setting Photoshop completely to original settings. Even files that I created before the problem began now have blurry text when opened. I esentially can't do anything with Photoshop right now and it is extremely frustrating. The following images are of the text WITH anti-aliasing and then without, both at 12 pt, 400%, 300 ppi.
I want to create REALLY crisp and smoothly anti-aliased rounded corners to my rounded rectangles ...
View 6 Replies View Relatedcan't turn anti-aliasing on in the marquee options bar. anyone know why?
View 9 Replies View RelatedI am using Photoshop cs5 win version.
I often use Layer style - Stroke Effect, to get strokes, but If I apply the effect to a layer, the stroke is always feathered, antialiased. Do you know how to remove those antialiased, semi-transparent pixels?
I need all pixels to be 100% opacity, because it's much easier to edit, easier to select. I always use Threshold adjustment layer with white solid layer to get crisp, aliased stroke pixels, but It's a little bit time consuming, so If you know the faster, much efficient way
Is there any way to turn off anti-aliasing in Photoshop CS4 when pasting text from Illustrator CS4?
View 1 Replies View Relatedhow can I achieve the best of my graphics card. I have a 6490M AMD Radeon, an i3 Sandy Bridge Processor at 2.2GHZ and 8GB of RAM. I am not looking for making Photoshop work the fastest possible. I know what computer I am working with. What I need are the best settings for my graphics card (anti-aliasing, vertical sync etc.) all those settings that you can change from Quality to Performance. How do they influence Photoshop ?
I would also like to know what are the best settings for Photoshop Preferences. Most of my work circles around Web Design (files with many layers and low resolutions).
I was instructed on a video tutorial to be sure to turn off anti-aliasing on this web design/template I am making in Photoshop as they did. But all my text is really bitmapped and on the video it is not bit mapped at all. There is no way to email them to ask so I did some research on my own.
I am on a windows 7 system running Photoshop CS4. My file is an RGB 32 bit, 72dpi 900 x 1000 pixels - pixel aspect ratio is set on square pixels and somewhere I read to turn off the fractional widths in the Character panel which I did but my text is very bitmapped. I don't understand why I would turn off anti-aliasing for such a low resolution file for the web - and why the video tutorial shows their type is absolutely fine.
I created this Gif animation with GIMP using Blender to provide the frames. The end result looks like this:
Gif animation here
The question is: How to put anti-aliasing on the frames so it won't look as jagged?
Do the newer versions of GIMP provide PNG animation support? Is it planned?
I used gimp 2.6 for awhile just to do simple isolations for various projects.
Recently my gimp 2.6 crashes while trying to load gradients, so i upgraded to 2.8 and all of the brushes that were in 2.6 are gone and NONE of them have anti-aliasing edges so i can isolate things with fuzzy alpha edges.
how to turn this back on or create a brush that has anti-aliasing edges?