Photoshop :: Photoshop 7 Mystery
Apr 26, 2004
I have been teaching myself PS7 for last couple of years with no problems until yesterday! I have been colourizing B&W photos using Colour Balance Adjustment Layers & Selections, where the Paintbrush masks the selected area and the Eraser reveals colour. Anyway I went on to another project but when I came back to do some more colourizing I found that the Eraser & Paintbrush Tools seem to have reversed functions in Colour Balance Adjustment Layer mode ie the Paintbrush reveals the selected area & the Eraser masks it.
View 4 Replies
ADVERTISEMENT
Jan 12, 2003
I now scan an image or bring even an old one up into photoshop I am getting a little grey box in the upperleft hand corner and in it is a number 1 and some other symbol which I cannot make out. This does not happen when I bring the same images up in Paintshop or painter. I recently had to uninstall Zone Alarm and am wondering if this could have something to do with it or maybe it isn't even a PS problem but something on my computer.
View 2 Replies
View Related
Apr 13, 2012
When I duplicate a layer, sometimes the layer will automatically duplicate as a copy within the same document, and sometimes it will open the dialog box that allows duplicating to another document.
It seems to happen randomly, on both iMacs I use, as far back as I can remember (using CS4 now).
View 9 Replies
View Related
Dec 9, 2008
Nvidia GeForce 8600GT 256mb downloaded the drivers last week (Driver Version: 6.14.0011.7824)
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3
Processor: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz (2 CPUs)
Memory: 2814MB RAM
Page File: 1049MB used, 3652MB available
DirectX Version: DirectX 9.0c (4.09.0000.0904)
Tech support says I am configured fine. But I need to have a compatible video card. I say based on specs it is. They say but it might not. I ask for list of "approved cards" and they can't tell me... they then tell me its Nvidia & Wacoms problem (but Autodesk works fine?) and transfer me to customer service to get me the mysterious list of approved vid cards (which I have searched for on the site - can someone point me top this?)and then cust service is reading off the side of the box "must have 1..2..8.. mb of " not even aware of what it is she is reading... then when I ask for SPECIFICS I am cut off. No call back even though she asked for my number in case we were... you know... cut...
Why is my Wacom Not working?[downloaded latest drivers and called their support] It shows up all cursor function fine, except when you try to paint... NOTHING appears. (Invisible ink, perhaps? Is this a feature?)
View 5 Replies
View Related
Feb 3, 2012
I create an assembly, then a drawing from the assembly, i add a parts list and annotate everything, then include a title block. Everything looks fine. Then i print or PDF the drawing and odd circles appear which aren't present on the original drawing. They appear to be randomly positioned and don't line up with any other cylindrical feature, i cannot work out how to remove them.
I have told all non-essential layers not to print and in the PDF the circle is on the same layer as the drawing (Visible (ISO)).
View 9 Replies
View Related
Apr 2, 2013
I have a project containing 4 similar groups, which were mirrored and went through the "Fix Groups" error. I think I made them unique to avoid ungrouping.
The issue I'm having now is that one of these groups has a couple doors in it that once existed in the design and are now no longer necessary. However, they were deleted at some point, but still exist when I highlight over the group (the first attachment shows an overlapping door highlighted in red and the purple location has a set of double doors--see second attachment). No amount of tabbing will allow me to delete them and I can't ungroup them. Do I need to just start over with a similar group? Or can I somehow find these doors and delete them?
View 5 Replies
View Related
Mar 28, 2013
The problem: I am importing a PNG sequence into After Effects (CS 5.5), however AE refuses to see the Alpha channel contained within the sequence. Now before anyone jumps the gun and says, "But wait, PNG does not really support alpha, it just supports transparency!" Right, something I just learned, and still -- quite honestly -- baffles the heck out of me.
But anyway, another PNG sequence exported from the exact same program, imports into After Effects just fine with an "alpha channel" and all. I double-checked, and there is NOT an option in the program to export the PNG without transparency info.
Importing sample images from each sequence reveals the EXACT SAME THING ... both have transparency, but NEITHER have an alpha-channel per se.
1) why in the heck AE would interpret one's transparency, and not the other?2) Is there a way to FORCE AE to see the transparency of the one?3) IF not, is there something out there that will convert the PNG's with transparency to another format (TIF, TGA, PSD) with an alpha? I just don't want to have to re-render the sequences again.
View 7 Replies
View Related
Nov 2, 2008
Version: Photoshop CS (1)
Computer: Pentium 2.4 gHz dual core
4 Gigs Ram
Nvidia 7950 video card Win XP Home
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
View 3 Replies
View Related
May 28, 2004
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies
View Related
Jun 7, 2004
when I got my first Macintosh IICX and all of my MacPaint clip art. I don't want to get rid of the clip art because since I'm still using a black ink printer and not upgrading to a color one, the clip art looks nice in newsletters and the like.
Up until this time I had been using SuperPaint which had the New Superbits editing plug-in to refine the pictures so they had the smoother and cleaner lines instead of looking jagged. With my new computer and printer, I'm also getting Photoshop CS packaged with Adobe Creative Suite Premium, which I have never used before. Since I have not received my order yet, I was wondering if anyone could tell me whether Photoshop has the capability of improving the older MacPaint clip art like SuperPaint did with the New SuperBits editing plug-in. Over the past two days, I have been trying like crazy to back-up my pictures with SuperPaint and then re-saving them with Graphic Converter. It's been so incredibly slow that I thought I would go ahead and ask you, the experts, if Photoshop can also improve the quality of my older MacPaint clip art or if I should continue to back-up my clip art like I have been doing.
View 2 Replies
View Related
Jun 17, 2008
I have just got back from the Elbow gig and pulled the images off the card. They load up in Bridge but don't have actual picture thumbnails. They are named correctly, ie: IMG_3483.CR2 but they won't open!? Error message says 'Could not complete your request because Photoshop does not recognise this type of file'
I could see them on the back of the camera.
mac users... i did a software update the other day and I noticed that there was an update for ACR. Could it have been something to do with that? And why can't I find ACR in my Applications?
View 3 Replies
View Related
Apr 29, 2013
I use Photoshop Elements 11. I am trying to upload photos to a website and the browse only goes to Windows/Pictures. How do I navigate to photoshop to upload pictures there?
View 3 Replies
View Related
Oct 30, 2012
of Adobe Photoshop v6.0.1 (quite old, I know, but it do all I want and on my old HW I did not plan/want to use any more recent version, because they are HUGE and with just a little preferences trick, I did not need to reinstall my PS - ever ), yet as Czech user, I need my software to type some special characters as well. These are looking like this:
[URL]...
Now the only problem is, that some of them PS just refuse to type. Seven small and seven caps are just wrong. See the line "for PS:"...
I battled the problem even by editing the fonts itsels, because that seems to work with Adobe Illustrator, yet this also cause the edited fonts to be useless in another programs. So I looked deeply and in the Adobe settings in directory Fonts / Reqrd are directory CMaps and perhaps editing the character map used will be better and usable solution? how to do it or even determine with file from the 96 files in the CMaps directory are right now used by Adobe Photoshop?
View 3 Replies
View Related
Aug 21, 2012
Everytime I open my CS6, it always show " Could not initialize Photoshop because the preferences file was invalid (it has been deleted)" I reinstalled it but it is still popping out.
View 10 Replies
View Related
Mar 8, 2004
when I try to save a tagra file with a alpha channel in photoshop 7 the box for the alpha channel is greyed out, with an warning sign next to it, and the line below stating "file must be saved as a copy with this selection" When I examine the saved file the alpha channel is not there!
Has anybody got any idea why?
My old version of photoshop 6, allows you to save alpha channels!
View 4 Replies
View Related
Mar 21, 2007
the soft edge feature of the eraser and the brush no longer work. I can go into the pallet and choose a soft edge eraser or brush, but it comes up hard edge. When I try to use the marquee box with a feather to get a soft edge, I again get a hard edge. I've used this technique a lot, so I think I'm doing the method properly. I have removed the preference files a number of times and have trashed the old Photoshop and reinstalled Photoshop 3 or 4 times,
View 2 Replies
View Related
Dec 29, 2008
I am working on someone elses computer and the Software settings are different. The old owner does not use this computer anymore. The swatches are set and I would like it to function how it usually does, etc. I mean, even the transparent swatch on the tool bar is not there anymore, so when I use the pen path tool, I get these white and black fills which makes it difficult for me to see the path I am meant to be following.
How do I reset Photoshop so that I can customise it the way I want it? Reinstalling the softwares is not an option.
I would like to reset Illustrator, Indesign, Dreamweaver, etc.
View 1 Replies
View Related
Aug 24, 2006
I'm having trouble with my zoom tool. If I have multiple Photoshop windows open, when I go to either zoom in or out of the top window... ALL the other windows mirror what's happening to the top window.
View 5 Replies
View Related
Feb 19, 2008
I am having in Photoshop CS2. I have had CS2 for over 2 years and have never had this problem. I am not able to open Photoshop CS2. I am getting a message that reads "Could not initialize Photoshop because a required resources text file is missing. It goes through a series of " could not load default contours, styles, custom shaphes because the file could not be found" before getting to the "initialize" window.
View 3 Replies
View Related
Aug 24, 2002
I scanned a picture on Microtek scanner and was tranfering it to photoshop when I saw photoshop embeded profile mismatch that has use the emdeed profile or covert document's color
in the working space or discard the emdeed profile. which embeded profile do you use for the photos? I attached the shot of the embeed profile from photoshop.
View 1 Replies
View Related
Jan 2, 2008
After scanning and opening a paper doc in Photoshop the image is distorted- ie its because i usually scan photographs for manipulation, i know this is due to scanner settings but i don't know how to change them there.
View 2 Replies
View Related
Jul 4, 2007
I have to build a website named Hollywood Movie Wallpaper . I've already gotten the pages done using adobe photoshop. This means that I know exactly what I want on each page and I've done the whole page by adobe photoshop. However, most website host needs the file to be in html in order for it to appear on the web. Is there any way to change an adobe photoshop image into a html file without changing the layout or anything? Coz it was hard work designing the layout and inserting the content into adobe photoshop image.
View 4 Replies
View Related
Mar 17, 2014
A co-worker needs to be able to access certain files that I have created in Photoshop CC. These files are saved as TIFFs, and as part of my workflow, I have just about everything in Groups. She currently has Elements 10 on her system, but that absolutely does not permit access to the Groups and the components within. Because of her job duties, I cannot necessarily justify adding her to the CC account since she does not need PS, AI, ID, or any of the other applications as I do. However, I can easily justify upgrading her to Elements 12...provided it does what we need it to.
View 1 Replies
View Related
Dec 18, 2012
Just downloaded Elements 11 and am extremly disappointed. What is the oldest version of Photoshop that I can run on Mountain Lion?
View 1 Replies
View Related
Apr 16, 2013
any editing I do in photoshop will now seem to need to be manually added to Lightroom...which I do not even want to contemplate. When I rightclick on an image and select Edit in --> Photoshop CS6, nothing happens...Photoshop does not open as it used to. I'd thought it might be Nik Collection trial or OnOne photo suite trial I'd installed, but I uninstalled both and restarted my computer, and the problem still exists. I'm using the current creative cloud version of both lightroom and photoshop.
View 1 Replies
View Related
Aug 4, 2013
i am going to design a Logo for one of my client. the logo will be like an rounded shield. URL....i can write the text on upper side of te shape which is "Center for Employment Training. Please see the image. on image where this text is written on bottom of shae "Skill Training. Human Development" how to write that text . i tried to wrap the text using Arc option but the text goes stretched.
View 2 Replies
View Related
Aug 15, 2012
When I use the spell checker in Photoshop CS5 to check a text layer, it always tells me there are no errors, even when I know there are, so it's a useless exercise. Where is the spellling dictionary installed, and how do I make sure it's working properly?
View 2 Replies
View Related
Jan 21, 2006
I currently use Photoshop CS2, but I also encountered this problem on Photoshop Elements 4.0.
Whenever I am working in Photoshop, my blue looks purple, my red looks orange, but my green seems ok, however when I save it, the colour is different. I know it is not the gamma because that affects everything, not just how Photoshop looks (I'm pretty sure). If someone could help me and tell me how much of a loser I am and give me some simple solution, that would be great because it's a pain not being able to see what it is really going to look like without saving it and looking at that.
Here is what I am talking about, a screenshot and the saved .png: ....
View 2 Replies
View Related
May 13, 2004
actually, it's the lack of anit-aliasing whenever I use the 'Free Transform' tool.
Is there a button that toggles aliasing on and off?
Thought I knew Photoshop well, but after scouring the preferences and what-not, I'm stumped.
View 2 Replies
View Related
Sep 2, 2008
I'm getting this message:
"Adobe Photoshop has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I have uninstalled/reinstalled Photoshop and still get the same message.
DELL XPS 420
Windows Vista Home Premium.
3GB RAM
Adobe CS3 Design Premium
View 6 Replies
View Related
May 21, 2007
I made a graphic, hosted it on a site, and looked at it in a browser. For some reason, the colors in the image look darker than how it does in Photoshop.
What do I need to do to make them both look alike or maybe I should be asking, "How do I make Photoshop display the color it will show as in a browser?"
If it's any help, I'm using a working space of "Adobe RGB 1998." Is this correct for web design work?
View 3 Replies
View Related
