Photoshop :: PS8 Exporting Images Turn Out Darker
Aug 31, 2004
when I save my image (jpeg, gif, etc) the colors turn out slightly darker then they're supposed to. I tested it myself and infact the color code slightly changed when I re-opened a saved image back in Photoshop.
Also, when making a new document is the default supposed to be 8 bit or 16 bit? Because when I set it to 16 bit I can't export it as a jpeg or gif. Moreover, is there a way to change all the settings back to default so that I'm sure I didn't screw anything up?
View 9 Replies
ADVERTISEMENT
Jul 27, 2006
when I save an image in PS (it happens with tif and jpg) and then open it, it looks different from the original psd--usually darker or harsher contrasts. (Yes, I understand the compression factor for jpgs will change the image, but it also happens with tifs.) I also notice people making comments about photos whose details I can't see until I copy and paste it into PS. I know this probably doesn't make any sense, but I don't know how else to explain it.
See the grass in the foreground? In the forum I'm viewing the original, I cannot see the grass at all. Yet, when I copy and paste it into PS, there it is! I thought the Adobe Gamma corrected the whole monitor, not just for PS.
View 6 Replies
View Related
Oct 24, 2008
After installeing CS4, all my images now look darker in PS. They all look at least 20% darker. I still have CS3 installed, and when I look into CS3, they images now also look darker. But when I flip back to Windows, all images look ok.
I thought it might be Adobe gamma - which I had disabled previously because it conflicts with my color spider calibrator. Sinec installing CS4, I looked in the startup folder of windows, but Adobe Gamma is not there... So I wonder what could possibly be affecting the way the images are showing in PS.
I tried a few different proofing methods in PS, but to no avail (only MAC proofing shows the image closer to what it should look like, but it's still not it).
WinXP SP3
Nvidia 8800 GTS
All latest drivers
4 GB ram (xp sees 3.25GB)
View 1 Replies
View Related
Feb 15, 2013
After I edit images in Lightroom 4, I export the jpg images to a new folder. When I open the jpg's in Photoshop or Bridge they are noticeably darker than they were when exported from LR.
View 8 Replies
View Related
Nov 6, 2012
After working with some pictures in PaintShopProX4 I saved them as jpeg and tif, but the brightness of the pictures is different ( they are darker) outside PaintShop. Is there something I should do to keep the original brightness?
View 2 Replies
View Related
Aug 7, 2005
My problem is that whenever I open an image in Photoshop (CS2), it appears darker than it actually is. As you can see in this screenshot, there is a clear color difference between the two title bars. Any ideas?
View 4 Replies
View Related
Apr 14, 2008
I have been making animated gifs for a while now and have had no problem til now....when I save my animated gifs, all animated layers/graphics does not show up except the background layer/image.
my saving output setting is gif so I dont know what has gone wrong.
View 2 Replies
View Related
Jan 30, 2003
I would make any sort of graphic, then save the file to my computer, and the color would be very, very much "off". The color would often times show as lighter, and it's totally not the same color as it were inside the PS workspace. I'll show an example between the photo "before & after". This is happening whether or not I use "save for web" or the save as feature, and whether I save it as a JPG, GIF, PNG, etc.
I took a screen shot of my desktop while I was in PS, and cropped just that section in Fireworks to make the buttonFWG.
View 3 Replies
View Related
Aug 24, 2006
slicing web images (navs, UIs, ect.) and exporting them to HTML files.
I know when you create slices in ImageReady and Save Optimized As..., they are exported in HTML and are put together with tables. Now, my question is:
Is there any way to export them as HTML, but then have them pieced together with "tableless", CSS design? For example, instead of aligning everything up by way of using tables, is there a way to align everything by way of using CSS?
View 2 Replies
View Related
Mar 10, 2009
How do I get pictures from photoshop to an email?
View 8 Replies
View Related
Aug 23, 2006
about slicing web images (navs, UIs, ect.) and exporting them to HTML files.
I know when you create slices in ImageReady and Save Optimized As..., they are exported in HTML and are put together with tables. Now, my question is:
Is there any way to export them as HTML, but then have them pieced together with "tableless", CSS design? For example, instead of aligning everything up by way of using tables, is there a way to align everything by way of using CSS?
View 2 Replies
View Related
Aug 25, 2002
I saw a websit with a menu,first i thinked it was a simple javascript menu,but later i saw it was done using flash. The exporting of the mage got perfect,do not seem pixelizated or contrasting. I would like to know what kind of format the image was exported into flash.
View 1 Replies
View Related
Mar 16, 2013
I have a problem with exporting my images from Lightroom 4 to a folder or Photoshop.
View 3 Replies
View Related
May 28, 2013
I've only just started having a problem with Photoshop. I'm running it on Mac OSX
My images will randomly take a chunk out of all layers, and the background will turn black where it was originally white. In one case all the layers on my canvas were distorted by a checker pattern of bright colours. All the images I am currently working on are in RGB mode which were hand drawn black and white images that were scanned.
I'm not sure what is going on but closing the image without saving and the closing photoshop and even restarting my computer doesn't seem to fix the problem.
View 5 Replies
View Related
Apr 10, 2004
how to configure the export of image slicing and stuff. Basicly, I need a tutorial that'll teach me from slicing of images, configuring (like text image to text in html), and exporting.
View 1 Replies
View Related
Jul 3, 2013
I am new to Illustrator. I am using CS6. I used Image Trace to turn some .jpgs into vectored images. My printer is saying they are not vectored images but rather that they look like .jpgs that were placed in Illustrator. Every tutorial that I have read and Youtube video that I have watched says that Image Tracing something makes it a vectored image. What am I not getting? Is there something further that must be done after Image trace to turn something into a vectored file?
View 5 Replies
View Related
Jan 20, 2013
I have been working on a series of drawings for a catalogue. I am using solidworks, creating a sheet, all line thicknesses are changed to 0.05mm and then exporting the sheet as .AI. Every drawing I create is saved using identical settings.Out of say 10 only 3 of them are okay and can be edited as vectors. The rest seem to turn themselves into a series of images.
View 4 Replies
View Related
Nov 23, 2011
I seem to be having a problem upon exporting the file to a PDF, which is very image heavy. All of the images in the file are at least 300 DPI if not much, much larger. However, when I export to PDF the image resolutions are very low. When I sent it to the printer (who does not accept CorelDraw files so it has to be PDF) they remarked upon the low resolution and you can tell the quality is terrible on the proof. When I print a copy of the brochure on just our color printer at work (same size as the brochure...it is not larger) the images are completely fine. What am I doing incorrectly?
View 12 Replies
View Related
Jul 7, 2013
My continuing story of space issues. Find that I'm rapidly running out of space now that my wife has been uploading way too many 24 mpixel files (~30Gb total) to my Lightroom 5 catalog. Is there any way to export her RAW files to a thumb drive or another external hard drive? The only export functions I see are conversions to Jpegs.
View 8 Replies
View Related
Dec 4, 2011
last week no problems exporting images at all come yesterday I get a screen saying ' An unexpected error occurred. This photo was not rendered. ( 1) ' this seems to occur for all images I have in LTRM
View 5 Replies
View Related
Jun 14, 2013
I recently opened a project I worked on months ago and noticed certain materials in my rendered images had turned blue. I created a new rendering in which all materials came out great and I saved it. Minutes later I opened the new rendering and it too became blue. I worked on this project for months and have not made any changes to materials. All previously saved images in my file, the wall materials, stairs, and certain furniture have all turned blue.
View 6 Replies
View Related
Apr 11, 2012
I have been using Corel for a few years now, and have achieved amazing results with corel and 4 color litho printing... HOWEVER now I am dabbling on the internet, and run a site
[URL]....... andwant to use Coreldrawx5 for doing my banners etc, as i am comfortable with the program... BUT if you take a look at my site you will see that the test banners on the top of the page and the Side Box Banners on the sides look " Out of Focus" for a lack of a better word.
View 4 Replies
View Related
Oct 18, 2012
I am working on a project that requires the images I create must be at least 250 DPI, preferably 300 DPI.
When I export, I am specifying 300 DPI, but the resulting image is only 96.
Is there a setting somewhere that is causing them to revert back?
View 5 Replies
View Related
May 16, 2012
I have to get to my printer ASAP with these images and i am having issues with a memory exception error, i have tried different computers to no avail, i have attached the .xar file and i need both images exporting as 300dpi jpegs. the images in the file are at 100% size but i can also live with 50% 300dpi jpeg exports.
the black background is C35 M35 Y35 K100 (rich black) and i have converted all fonts to shapes won't need the fonts. Both images use the 'speedometer' graphic as a clip view
View 9 Replies
View Related
Oct 13, 2012
when i create images in Xara they look very clear and crisp but once exported and appear on the website they lose their clarity and sharpness.
Which brings me to the question.. what is the best way to export images for a website? Are there advanced settings that I may use to improve the images appearance on the website.
Heres a link to a website: [urL]........ and Im uploading the Xara document as well.
View 3 Replies
View Related
May 28, 2012
I have a canvas with a number of different images/shapes on it.How can I just export one of the images & not the whole canvas?
View 7 Replies
View Related
Sep 1, 2013
Recently I upgraded to Lightroom 5.0. I have been noticing that when I export images at 1000px max and 100% quality, the image is very grainy. I can open that same image in Photoshop CC from Lightroom, resize the image to 1000px max, and save, and the image looks great.The first photo is the Lightroom 5.0 export. The second is the Photoshop CC resize and save. never had this issue with any earlier version of Lightroom and I have been using it since version 1.0.
View 2 Replies
View Related
Jun 3, 2013
I am able to export from Lightroom to my computer (iMac), but the file that shows up is NOT EDITED.
View 2 Replies
View Related
Jan 1, 2013
n Lightroom, I want to rename my images, based upon the image name and its mapping in a CSV file. Ideally, I would want something like this:
When the user after editing goes to Export under File menu. Inside the File Naming panel above, one should be able to input the CSV file containing the mapping. Hence once exported, the new Images will be named consistently with what I need rather than the default ones provided by LightRoom.Using the plugin LRTransporter one can do it while Importing images (storing the new name under Caption and then renaming all using Batch Rename). But it is tedious. What I need to know is that, can we build such plugin which can do it? If yes I would move ahead with constructing it.
View 2 Replies
View Related
Mar 15, 2013
I have recently switched from a Mac Laptop to a PC desktop. After I export my images they are really pixelated. I am not sure if lightroom is different for a PC. I have the same settings picked too.
View 14 Replies
View Related
Aug 31, 2013
When I export my images, the results are not nearly as good quality as on my screen. In fact, I have to throw out perfectly acceptable photos after I have completed editing because they are way too noisy after export!
View 1 Replies
View Related
