how to configure the export of image slicing and stuff. Basicly, I need a tutorial that'll teach me from slicing of images, configuring (like text image to text in html), and exporting.
View 1 Repliesslicing web images (navs, UIs, ect.) and exporting them to HTML files.
I know when you create slices in ImageReady and Save Optimized As..., they are exported in HTML and are put together with tables. Now, my question is:
Is there any way to export them as HTML, but then have them pieced together with "tableless", CSS design? For example, instead of aligning everything up by way of using tables, is there a way to align everything by way of using CSS?
about slicing web images (navs, UIs, ect.) and exporting them to HTML files.
I know when you create slices in ImageReady and Save Optimized As..., they are exported in HTML and are put together with tables. Now, my question is:
Is there any way to export them as HTML, but then have them pieced together with "tableless", CSS design? For example, instead of aligning everything up by way of using tables, is there a way to align everything by way of using CSS?
i made a site for my band and sliced it up and let it do all the html for me but the last 4 sites i made got messed up when i uploaded them exept for 1.
View 2 Replies View Relatedjust recently purchased the CS upgrade and I'm having some Imageready problems that I don't have with 7. Perhaps I'm overlooking something, but I've gone in to make sure the settings in both versions are the same wherever possible. I'm using XP Pro (fully up to date with service packs) on a P4 2.4Ghz with 512mb RAM and 120GB hard drive.
If I create a sliced image to svae optimized for web as HTML page, and I select just the bottom row of slices and tell it to save "Selected Slices" only, ImageReady CS is still including the HTML table codes for all of the other non-selected slices, and placing spacer.gif files in them. This presents a big problem, because if I try to remove those unwanted table data boxes and spacers it completely garbles the page, and if I leave them in, I end up with a bunch of unwanted blank space in the page.
In Imageready 7 I do not have this problem. I will save and code only the selected slices that I tell it to, and does not insert a bunch of unwanted table coding with spacer images.
I am creating an interactive trainer that operates like a website. I created slices and rollovers for different section within the trainer and all works flawlessly in Imageready, but when I preview there are gaps between the slices and some of the page edges are jagged where the slices seem to have moved or slipped?
View 1 Replies View RelatedA client gave me a PDF of a typical architectural floorplan; with various rooms in the building. My job is to slice it so that each room is a separate slice. Easy. But we need the background of each slice to be transparent. Essentially we want to overlay a line drawing outline of the rooms on a different background.But when I save it as either a GIF or a PNG, it always saves the bg as -white-, regardless of how I try to set the transparency colour.
Now in Corel, if you save as a GIF or PNG and set the transparency colour to the -background- colour (white), the GIF or PNG auto-magically gets saved with a transparent bg. But this is not happening for me.
So... is there a way to save my GIF, PNG slices so that the white is automatically converted to transparency in each slice?
Or do I have to -manually- remove all the white in the main image (not looking forward to that!) and then slice?
I have imported an avi movie into Imageready, and now every frame of the movie is on a single layer.
Now I'd like to know, if there is a way (action?) to export every layer as a single jpg. My goal ist to add filters to every single jpg (with batch processing) and render them into a new movie.
when u slice an image, and then make different slices into links to web pages,
View 2 Replies View RelatedI can't believe there is not more demand for this. My web dev is asking me for over 300 video clips in both .web and .ogg - - AME does not do this.Any success with a 3rd party plug-in of some sort. I can use Fire fogg (from Firefox) but it's slow using over the web as opposed to exporting from Premiere.
View 32 Replies View RelatedI recently redesigned my website using an image which was sliced using imageready and then put back together using tables.
I was told that tables were okay for this but I should have used css, surely I owuldn't have to do an absolute position for each small segment of the interface - can anyone describe how this technique may work and is it better than using tables?
recently in photoshop i have been designing web layouts and theres one thing i need help on. I was wondering if anyone could post a good slicing tutorial that clearly explains how you can the html contents to your site, for expample once you've made a content box, how then do i slice it so that i can add text inside the box and the box can also get bigger the more text that is added. Any help with this will be appreciated . Also one little problem i seem to be having is that when i use the fill tool and fill inside a cut out (marching ants) it always overlaps the edges of the lines and looks like its been blurred,anyone know why this happens?
View 1 Replies View Relatedi did all my images, layout and text with photoshop... so i started slicing the images into jpegs and text blocks... now my problem is when i select no image in the slice tool and it ask to enter the text it messes up the whole page.. and it puts a white background on it... how do i get rid of the white background? (the text is over color) and also how do i prevent it from pushing all the other stuff over and messing that up?
View 1 Replies View RelatedI'm trying to export an image map from Illustrator CS6. However I can't get it to save the HTML.
I've setup my hotspots etc. However when I do "Save for Web", there is no option to save "Images & HTML". It only gives me the option of "Image Only".
The only way I've been able to get the HTML is to click on "Preview" from the "Save for Web" screen, and then copy and paste the image map code from there.
I've also tested it with slices, and same thing. There just seems to be no way to get it to generate a HTML file.
Is there some other way I'm supposed to get it to create the HTML?
i have so manny duplicate inages when i open my html? example: in my indexpage I have my images..ok so i change a few images when i load in my 1st and 2nd page(so on..) and when i look in my images folder i see duplicates of the sa,e images..i assume this takes some space, extra unneeded space?
View 9 Replies View RelatedI am working on 2D game and I have been using GIMP to make the images and textures. I am finding an error when slicing these images. Ive tried it on multiple computers at home and at work and i always get this error when slicing this image.
I tried slicing a different image and it worked fine...so recreated this image and tried slicing and get the same error... so whatever the issue is, i accidentally repeated it..
Error is below... when i try to slice the two error windows come up
[img]
[URL]......
Title about says it... last night I noticed that images in CS, especially ones with blues, have a pronounced purple tint.
I've Googled the subject pretty exhaustively and came up with nothing except setting the color settings back to the default (which they were at), making sure the color profile is RGB (it is), and taking Adobe Gamma out of my startup group (I did).
Blues show up fine in ImageReady, just look purple in PS. Very weird.
I have been reporting this problem in PhotoPaint for many years now, and was hoping it might be fixed with the 64 bit implementation. Sadly, it still does not work. Certainly this cannot be such an impossible problem to resolve.
The last version when it worked was with release 12, which I kept around for quite a while until I switched to a new system. I have tried it on each release of PhotoPaint since then, and it has failed on X3, X4, X5 and now it still fails in X6.
It works with smaller images, but when the image is greater than some 3000 to 4000 pixels wide, the results are totally scrambled..
I'm trying to export an image to HTML.
CorelDRAW only creates 4 images out of the one CorelDRAW images.
Is there a way to reduce the number of images to one?
I would make any sort of graphic, then save the file to my computer, and the color would be very, very much "off". The color would often times show as lighter, and it's totally not the same color as it were inside the PS workspace. I'll show an example between the photo "before & after". This is happening whether or not I use "save for web" or the save as feature, and whether I save it as a JPG, GIF, PNG, etc.
I took a screen shot of my desktop while I was in PS, and cropped just that section in Fireworks to make the buttonFWG.
How do I get pictures from photoshop to an email?
View 8 Replies View RelatedI saw a websit with a menu,first i thinked it was a simple javascript menu,but later i saw it was done using flash. The exporting of the mage got perfect,do not seem pixelizated or contrasting. I would like to know what kind of format the image was exported into flash.
View 1 Replies View Relatedwhen I save my image (jpeg, gif, etc) the colors turn out slightly darker then they're supposed to. I tested it myself and infact the color code slightly changed when I re-opened a saved image back in Photoshop.
Also, when making a new document is the default supposed to be 8 bit or 16 bit? Because when I set it to 16 bit I can't export it as a jpeg or gif. Moreover, is there a way to change all the settings back to default so that I'm sure I didn't screw anything up?
I have a problem with exporting my images from Lightroom 4 to a folder or Photoshop.
View 3 Replies View RelatedI seem to be having a problem upon exporting the file to a PDF, which is very image heavy. All of the images in the file are at least 300 DPI if not much, much larger. However, when I export to PDF the image resolutions are very low. When I sent it to the printer (who does not accept CorelDraw files so it has to be PDF) they remarked upon the low resolution and you can tell the quality is terrible on the proof. When I print a copy of the brochure on just our color printer at work (same size as the brochure...it is not larger) the images are completely fine. What am I doing incorrectly?
View 12 Replies View RelatedMy continuing story of space issues. Find that I'm rapidly running out of space now that my wife has been uploading way too many 24 mpixel files (~30Gb total) to my Lightroom 5 catalog. Is there any way to export her RAW files to a thumb drive or another external hard drive? The only export functions I see are conversions to Jpegs.
View 8 Replies View Relatedlast week no problems exporting images at all come yesterday I get a screen saying ' An unexpected error occurred. This photo was not rendered. ( 1) ' this seems to occur for all images I have in LTRM
View 5 Replies View RelatedI have been using Corel for a few years now, and have achieved amazing results with corel and 4 color litho printing... HOWEVER now I am dabbling on the internet, and run a site
[URL]....... andwant to use Coreldrawx5 for doing my banners etc, as i am comfortable with the program... BUT if you take a look at my site you will see that the test banners on the top of the page and the Side Box Banners on the sides look " Out of Focus" for a lack of a better word.
I am working on a project that requires the images I create must be at least 250 DPI, preferably 300 DPI.
When I export, I am specifying 300 DPI, but the resulting image is only 96.
Is there a setting somewhere that is causing them to revert back?
I have to get to my printer ASAP with these images and i am having issues with a memory exception error, i have tried different computers to no avail, i have attached the .xar file and i need both images exporting as 300dpi jpegs. the images in the file are at 100% size but i can also live with 50% 300dpi jpeg exports.
the black background is C35 M35 Y35 K100 (rich black) and i have converted all fonts to shapes won't need the fonts. Both images use the 'speedometer' graphic as a clip view
when i create images in Xara they look very clear and crisp but once exported and appear on the website they lose their clarity and sharpness.
Which brings me to the question.. what is the best way to export images for a website? Are there advanced settings that I may use to improve the images appearance on the website.
Heres a link to a website: [urL]........ and Im uploading the Xara document as well.