Photoshop :: Most Functions In Liquify Stopped Working CS4?
Aug 14, 2013
Suddenly, Forward Warp, Bloat and all the rest stopped working. The only things that work are Freeze Mask strokes, Thaw Mask strokes and Zoom. Nothing was changed in settings except Brush size when this happened, which was: closed out of PS, re-opened the same image I had been working on... no response in Liquefy.. I then tried other BMPs, JPEGs and PSDs, all of which I had worked on before today with Liquefy. I also tried restarting the machine. Again, 99% sure no settings were changed except Brush size. Tools in the main interface are working normally.
View 11 Replies
ADVERTISEMENT
Dec 7, 2012
I have Lightroom 4, Photoshop CS6 and am trying to edit a photograph in Photoshop using liquify. I did a test on a jpeg photo the night before and it worked just fine, I was able to maniplulate the file. However last night when I tried to edit a file from lightroom or any jpeg file now with liquify it doesn't do anything. An example of this is that when I open the same jpeg as I did the night beofre and select for example the hand tool nothing happens to the image as I pull on parts of the image. I have changed the brush size and the pressure settings but no change.
View 3 Replies
View Related
Jan 13, 2009
I've searched around for an answer to this, but a question for the same problem doesn't seem to have been asked anywhere that I've found, so I hope someone here might know.
I am running CS on Windows XP. I previously used the Liquify filter on a large picture with no problems. Now I want to do a new one, but the preview of Liquify won't work - the picture comes up, but I can't see the real-time changes. When I hit OK the changes show up on the picture, but since I couldn't see what I was doing, they're not what I want.
I have found where someone has had this problem, but it seems like they always had it and was never able to see the preview, which isn't the case here. I have tried updating my video driver, like someone advised in that case, but it did nothing. I made no changes to the computer's hardware since it last worked (May). I have also tried using a small file to see if it was the size of the file, but the preview didn't work then either.
I have an external drive where my file resides, with 74.5 GB free. 12.5 GB is free on my internal HD, which is where Photoshop is installed. 931 MB RAM. Since it worked before, I'm hoping it's something like clearing up more memory space on my HD.
View 5 Replies
View Related
Jan 9, 2013
I used the liquify tool on a selected area of a picture and it worked fine. Well, now when I select my area and try to use it, it just slightly warps the area and does nothing else. The liquify screen and options never come up. I think it's just repeating what I did in liquify the last time I used it instead of giving me the option to do what I need to do. It just won't let me do ANYTHING with the tool other than the warping(what I think is the "repeating" of the previous uses effects) everything else in photoshop is working fine for me, this is the only problem I'm having. Before this, it would just crash when I tried to open liquify but I fixed that by changing the video codecs/plugins to the ones that work with it so that is no longer a problem, it doesn't freeze or anything. So why is it just repeating what I did last time?
View 2 Replies
View Related
Jul 1, 2012
I was working normally in a drawing (ACAD 2012, 32b) file when, without any apparent reason, I tried to delete something and it didn't work. The way I work is that I select first and then press the "delete" key.
Now, when I do this, absolutely nothing happens. The objects remain selected. While trying to figure out what was happening, I discovered further disruptions. For example, when I select and object and then right-click, instead of showing me the edit shortcut menu, it repeats the last command. I know what you are thinking, but I already verified the right-click customizations and it is correctly set to "shortcut menu" in the "edit mode".
Finally, when I double click on a text, it won't edit as expected; again, nothing happens. Ane yes, in "Options/Windows standard behaviour" the "Double click editing" options is selected.
All the above has it's way around: the "erase" command works, the "ddedit" text works, etc. But it slows me down horribly.
View 5 Replies
View Related
May 24, 2012
Adobe Photoshop CS6 has Stopped working when either Liquify Filter is accessed from within Photoshop running in Win7 32bit. How to keep PS on the air?
View 1 Replies
View Related
Oct 13, 2012
My liquify filter has suddenly stopped working.
View 6 Replies
View Related
Jan 1, 2013
Lightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?
View 2 Replies
View Related
Sep 24, 2013
This is a copy of the system info from CS6:
Adobe Photoshop Version: 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: AMD CPU Family:15, Model:1, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2, SSE3
[code]...
I have tried disabling the Catalyst A.I. and restaring PS. The video card is AMD Radeon (TM) HD 6620G. Nothing I do seems to work. I can see the 3D menu it's all grayed out and when in the 3D tab under layes, if I try to create a 3D object this is the message I get. "The 3D features require that "Use Graphics Process" is enabled in the Performace preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly.
View 9 Replies
View Related
Feb 16, 2013
When I open any image at all liquify will not work on them. The brush basically picks up the whole image and moves it instead of reconstructing what I want to on the image. I have CS6
View 1 Replies
View Related
Jul 16, 2013
I have two problems with my Photoshop CS3.
1] When I open an image > Filter > Use Liquify filter > Press OK -----Nothing happens, Image reverts back to its original state. Same thing happens with other filters.Why is this happening?I re-installed PS and even formatted my PC (Win7, i3) but still it continues. Used mode> RGB/8bit ----but non of any use.
2] Also, PS is creating *_MVM_.tmp files on othe HDD ie on D:/ and E:/
View 5 Replies
View Related
Sep 29, 2013
I have been using liquify to make minor adjustments to slim down people in photos and up to now it has always worked fine. Today I try to do the same just to make the arms of the girls (attached) a little trimmer and liquify tool refuses to allow slight corrections bit by bit. Instead as soon as you start dragging just a tiny amount it makes a huge jump and drags the pixels massively off. It seems to drag them down first, then make them in a roughly circular shape the size of the cursor.
How can I rest liquify tool to how it was? Why it should suddenly change like that unless I have tripped something by mistake. I thought at first it might be my mouse but I have tried it with mouse, tablet and trackpad all separately wtih nothing else in the USB and still the same result. Have rebooted photoshop and the computer too to no avail.
View 3 Replies
View Related
Oct 14, 2013
I use Photoshop CS4 every day all day, as of this morning my liquify filter has stopped working and I am pulling my hair out trying to figure out why. I have already checked the obvious; I am working on the correct layer and 'show image' is indeed checked. I have already trashed the preferences and restarted both Photoshop and the computer. I am attaching a screen shot below (just in case I am missing something). The tool itself is working (I can see the brush and move it), it is just not doing anything. Nothing has changed from yesterday, there are no new software updates to install, I just sat down to start work and it wasn't working.
View 4 Replies
View Related
Sep 27, 2013
Liquify doesn't work at all. It literally does nothing no matter what settings I try! I have a mac, all of my software is updated..The brush pressure option is locked and it is set to 1?
View 2 Replies
View Related
Aug 3, 2013
when I decide to start over in the Liquify filter, I press the ALT key which turns Cancel to Reset and click it. In my case, nothing is happening. I am expecting all the changes made in that session to be removed so I can start over. Oddly, all the changes remain intact.
View 7 Replies
View Related
Sep 11, 2012
recently I've upgrade to Photoshop CS6.All works great, but Liquify filter. Well, filter works great (new mercury engine is awesome!) but something happened to cursor.Look screenshot below.
Using PS CS5 I have not problem checking "Use GPU" option in Preferences panel; and with it checked PS CS6 works great, except Liquify cursor. If I uncheck this option, Liquify cursor looks normal.
iMac 27"
Mac OS X 10.6.8
ATI Radeon HD 5670
BTW I've updated to 13.0.1 and nothing change.
View 35 Replies
View Related
Jul 27, 2013
I now use a Nikon D7100 and used to have a D3100. The D3100's images work fine with the Liquify filter but with the D7100 I just get a black screen.
View 1 Replies
View Related
Oct 23, 2012
liquify is not working when i open it is all black my video card version is 8.9 using inspiron 15r
View 7 Replies
View Related
Sep 30, 2012
Everytime I select the liquify command PS stops working, I've tried with different resolution pictures, with the 32 and 64 bit versions. If I use CS5 I have no problems.
View 6 Replies
View Related
Jun 9, 2012
All of a sudden, when I try to use Liquify in CS6, I get the following warning:
"Liquify is capable of utilizing the Graphics Processor on RGB files to increase performance. The color mode you have chosen will not utilize the Graphics Processor."
If I click OK and continue, the image is just blank inside Liquify. It used to work just fine. I am in ProPhotoRGB colour space.
View 2 Replies
View Related
Sep 11, 2013
Mac book pro running osx 10.8.4. 8 gig ram.
I've uninstalled all adobe software, used the adobe cleaner, reinstalled the applications manager. nothing works.
View 3 Replies
View Related
May 16, 2012
The Liquify filter in PS 13.0 x64 does not work correctly. The Forward Warp, Magnify and Hand tools work okay, but the rest of them produce the same strange effect of a jumbled combination of swirl and black on white dot patterns. ending with a circular "transparent" pattern. I have just installed after removing 5.5 and using the Adobe Cleaning Tool. There were multiple errors in the installation log file, which I saved. I'm running Win 7 fully patched and up to date. I have a Toshiba Tecra wiith 6GB of RAM and an ATI Radeon DH 6450M GPU.
All three of the non-functioning tools begin with a swirly pattern quickly being jumbled by dots and checkerboard. If you hold the click for a few seconds it ends up looking like the above image.I use the liquify filter a lot and I don't want to waste a fortune by going back to CS55.
View 30 Replies
View Related
Dec 1, 2011
I have just upgraded from Map 2009 to 2012 4-bit and many of my lisp programs using map functions do not work. Is there an explanation for this and is there a new "catalog" of data extension function and such available somewhere?
View 5 Replies
View Related
May 6, 2013
In my Parameter equation dialog box: "cos(.5)" is red"(.5)" is black.
Does Excel need to be installed for Trigonometric functions (I don't have Excel)?
View 2 Replies
View Related
Mar 15, 2014
I have PSE 11. When working with the Bloat or Pucker tools in the Liquify filter, the Brush Pressure option fades to gray; the only slider I can actually change is the Brush Size. The problem seems to have started about three weeks ago on my old laptop, which was due to be replaced in any case. I've since purchased a new laptop and have done a full install of PSE 11 on it from the original disks - but the problem still persists.
View 7 Replies
View Related
Feb 28, 2013
And before you say "It's because it's 14 years old", know that it was working perfectly until about two months ago.
I have a Windows 7 laptop with 4GB memory, plenty of HD space, and no other PC issues.
View 9 Replies
View Related
Dec 15, 2012
My Photoshop CS4 and CS5 shows "Photoshop has stopped working" . Whereas I have Windows 7 64bit, 6GB RAM, 512MB Graphics Card.
Earlier I worked in this version. But after formating my conputer I could not do anything with only in Photoshop. First I installed Photoshop CS4 it was failed to work then install Photoshop CS5..It also failed to work.
View 2 Replies
View Related
Oct 3, 2013
I updated Photoshop CC about 7 days ago. Before that it worked fine, since then I have been using Photoshop CS6 for some work (CC left it there when it installed) but yesterday I wanted to go to Photoshop CC from Lightroom 5.2 and Photoshop CC hung. Rebooted computer and tried to open Photoshop CC but it crashes on initialization.
As interim measure I installed PS CS6 as an optional external editor in Lightroom, but I would like to use Photoshop CC again one day!
View 6 Replies
View Related
Jun 28, 2013
Yesterday, I tried to start up Photoshop, but it got halfway through initializing and stopped, flashing a message: "Adobe Photoshop CS5.1 has stopped working." I shut down the computer and tried again, but it repeated three or four times.
So I uninstalled the program. Upon reinstallation, installation failed and the computer said: "Your installation encountered errors. Please try restarting your system and installing again. Exit Code: 20."
View 4 Replies
View Related
Sep 30, 2013
I have been using my program since June without issue. Suddenly it stopped working. I can open the program but it will not create a new file or open an existing file. If I "open with" from windows explorer it won't open either. I have uninstalled and reinstalled the program and I'm still not having any luck.
View 1 Replies
View Related
Feb 23, 2009
I get an error message from windows vista premiumm home.
It just says: Adobe Photoshop CS3 has stopped working correctly. Windows will close the program and notify you if a solution is available. The only option is a box that says "close program". Once you close it everything goes away. It doesn't even give you a hint of what the problem could be. I installed creative suite 3 web premium on this brand new computer about 2 weeks ago. This is a first time install of this software, but when I called Adobe they said they don't offer free installation help anymore on cs3 because cs4 is out now. Anyone have a clue what I should do? I can't just uninstall photoshop, if I try it wants to uninstall all 8 programs.
View 1 Replies
View Related
