how i can join two images toghether. both are protraits and have drastically different backgrounds. basicly I took a group photo and 1 person was missing. so I took a picture of her in a different setting with the correct pose. now I would like to add here to the rest of the group....
View 3 RepliesI need to join 2 images together to form one image and I was wondering whether this is possible using Photoshop ? Basically I am joing a main image (say of dimensions 6 x 4) with a 'header' image (dimensions 6 x 1). I need the join to be as seemless as possible so that the resulting image looks like one image !
View 5 Replies View Relatedi am trying two join two images together using photoshop cs3.
I have created two images in flash cs3, but flash is un able to merge images side by site.
What i want is a gradual transaction from one image two another.
join and blend images for a web header. One of my friends blended this picture for me but doesn't remember how he did it and I would like to chage it up every now and then. I'll attach two different images so you can see what I mean.
View 6 Replies View RelatedI want to join 2 images together to make a bigger image, the easiest way to explain it is, say 1 image is 10cm x 5cm and the other is 18cm X 7cm and I want to put both together to make a new image 14cm X 10cm. They need resizing too.
Image A
Image B
Join (NOT merge) them like this;
A
B
I am trying to make a background or an overlay of this pattern i created. i want to drop the opacity on all of it and be able to edit all of the parts of the image with one action, instead of all of the layers seperately.
all of the graphics are seperate layers on their own. i took and created new layers out of one another, from an original. so i have like 15 or so of them. is there a way to lock/join/merge them together into one, single editable layer?
i want to drag it onto another image and make them translucent. i can link them (with the little chain symbol on my layers window) and drag them all, but then if i try to do any editing, it will only do one at a time.
Is there a way to join two lines through anchor points and not endpoints? Simple example would be to create a 'T' object by joining two lines.
View 2 Replies View RelatedIs there a way of assembling several projects on the same time line in order to create a compilation video then re editing them to create a new project. The only way I can fiqure is to make a video file of each project and then edit together. not a very flexable way of working.
View 1 Replies View RelatedI have many short lwplines on separate layers. I need to join them by layer and then add fit or spline smoothing depending on if they are closed or open. The plines are produced automaticaly in code, so there is nothing else on the layers besides the pline. I am using this code to create a selection set of plines for each layer.
'''If sset Is Nothing Then Set sset = ThisDrawing.SelectionSets.Add("ss1")End Iflifiltertype(0) = 8v(0) = "jhl_11.00_begin"sset.Select acSelectionSetAll, , , lifiltertype, v
I think that I have to use SendCommand to do this. I would like to know the proper syntax to Join, Fit or Spline the plines using my selection set.
I am having problems trying to join some objects. I have a smaller circle in a larger circle. and an arrow (just two lines) pointing right. I would like to join these objects, so that each end of the arrow will join to each the circles and make it one object.
The effect Im looking for is that the center circle is gone/transparent, and I can fill inbetween the two circles with a color (with the arrow head included). Ive included the file (or an image, whichever it takes incase my description is confusing.
I have two halves of a rod that I want to join. They're both objects. What's the best way to fill in the gap between the two halves of the rod? It currently looks like this:
Using the LOFT command obviously just creates a surface between them, however, it doesn't become one model.
I am currently doing an MEP project and I am tidying up the model at present. I am having problems attaching the walls to the roofs. There could be a simple solution but I haven't found it yet !
I have tried attaching top base etc. but its not working. I only seem to be able to select one side of the roof when selecting where to attach the walls. I have attached 3d pics showing the walls that are extruding & also one of the walls that I am trying to attach.
Is there a way to prevent walls from joining?
View 1 Replies View RelatedI have the following flights of stairs running down one side of my building:
Landing, 6R with 170mm height, Landing, 3R with 190 height, Landing, 7R with 182 height.
I've modeled this as 3 separate flights of stairs because of the 3 different riser heights. The top landing is a floor slab, as is the bottom landing. I've modeled intermediate landings as either the top or bottom tread of a flight. How do I deal with the junctions of these stairs? The monolithic concrete will not join. The materials of both components are set to <By Category>.
How do you join a square wall to a slanted roof so that the walls are not sticking out of the roof.
View 1 Replies View RelatedJoining lines into polylines in autocad 2007. Basically, I got stuck when joining several lines together using PEDIT and then Join. At the start, it was very smooth process with no drama. Then, I came across two polylines and wanted to join them together, it just did not work. It works most of the time. Why I can't join certain lines together or two polylines together. This is a 2D drawing CAD.
View 3 Replies View Relatedim after to join two lines into one line. ive got a rad of 10mm then a straight line.
dxf as shown, im using Lt
Sometimes when I am filleting lines they end up joining together like a Polyline. Is there a setting I can turn off that will not allow lines to join when filleting?
View 3 Replies View RelatedHow do I join two line endpoint together, which terminate at the same anchor point and are at a 90 degree angle, to form a corner instead of a stair step? My problem is on the left, and I want it to look like the right corner.
View 4 Replies View Relatedafter razor cutting a clip (and doing other steps after it): is it possible to join the clip again?
Or is it the only way to delete the first or the second clip and strech the other? But this would be a little circuitous.
I am using CorelDraw X3. can you let me know how I can stop words joining together or spreading apart, when I use force / full justify?I want either side of the columns to be justified...
View 5 Replies View RelatedWhen I join 2 lines that are dashed (or dotted, I don't know which is the correct name) there's no "corner". See picture below. In one of the corners the lines doesn't meet. In the other there's a "cut-out".
View 14 Replies View RelatedI am considering upgrading to X5 because I have been told there is a new tool to join nodes into a solid fill able object. I have many drawings that have been sent to me in .dxf format where in all nodes are broken. I use X4 currently and can individually join nodes in order to get an object "joined" and will fill. In order to do this it often takes many hours of selecting each set of seperate nodes and joining them . When all objects will fill then then I save the .dxf in native.cdr format.
View 2 Replies View RelatedI'm trialing VS ProX5 and have uploaded multiple video files and have trimmed them and multi trimmed them and now would like to join them together to make one video and put a voice over on top. Is that possible?
I haven't tried the voice over bit yet cause I haven't been able to figure out how to join the videos.
I have a compost pad and retention pond to design, I set my back Pad line to surface and then graded to elevation so the slope to the pond will have no cuts
I created a pond and left out the grading to surface on the up hill side towards the pad which will be paved one day. I now created two side feature lines to enclose the whole pad and graded by distance and slope.
My problem now is the two side and back seem to blend together as I attached the feature lines together but I can not figure out how to blend into the pond create as it has side slopes to EG and the front which must join to the side slope crest to enclose the pad to drain into the pond.
Normally i Join lines and fillets to become a polyline and no problems
But sometimes when i Join them it turns them into a Spline which i dont want.
Then i have to convert it into a polyline and it then it adds load of points/grips on the line which i dont want.
Is there a setting that stops the lines converting to a spline
I have some rectangular jpg logos that I want to join together so as I end up with say six jpg running left to right joined across a page.
View 1 Replies View Relatedjoining my main roof to the roof of a dormer. The issue is the top of the dormer sits higher than the main roof. I am having trouble getting the main roof line to run up to the ridge of my dormer (just the small triangular piece doesn't want to connect). I'm not able to attach the file because it is too big.
I built the roof using the footprint tool, maybe that wasn't the way to go.
Another little problem off the big list. Up until now i have been using Autocad Architecture 2009 but recently upgraded to 2012. For some reason though, my hatches are now no longer linking on wall corners like the attached drawing shows.
View 2 Replies View RelatedIm creating plans for a new entryway and so that I have some perspective on how it will all join together i'm also creating a 3d model of my entry idea. In order to move things around to get a better view of how im planning on building this entry, I joined studs together so that I can move things around in the viewport without having to select each object. I know I can grab all the objects at the same time to move but I was wondering IF there is a way to union objects so that they dont lose the lines between joining objects. For example if 2 - 2x8 studs are next to each other and I were to union them, then they would plot as a 4 x 8 instead of 2 - 2 x 8's OR is there a way to maintain lines after union?
View 2 Replies View RelatedI got a few boreholes in a test drawing and i want to join the various strata horizons (with 3d polys or something) to create surfaces.
Each borehole has several points organised in groups (input via the Borehole Importer Tool) I have gone into a SW isometric view but cannot snap to any of the points that are "below ground". I have got Node OSNAP on but can only select the topmost point every time
Whilst I could create surfaces based on the point groups this will give rise to geologically suspect surfaces so there is a bit of manual interpretation work needed.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600