Photoshop :: How To Save As PDF Without Reducing Resolution

Sep 23, 2013

My card is ready to go at the specified resolution (300 dpi) and dimensions, but whenever I save it as a pdf, it reduces the resolution immensely. The dimensions of the photoshop file are 1062x615, whereas the pdfs (no compression) are always 254x147. The photoshop file, again, is 300 dpi.
 
The dimensions in inches for both files: 3.54 x 2.05 Obviously 254 pixels across 3.54 inches is not 300 dpi, but I cant figure out why it would do this.

View 8 Replies


ADVERTISEMENT

Photoshop :: Reducing Resolution For Web Use

Dec 11, 2008

i'm just learning some basic 2d (i work mainly in 3d) and am in the middle of reducing/cropping some of my images so that they fit neatly on a web page. i have a couple of questions:

1. when i reduce (resample) an image, in the resample dialogue there is no easy way to just reduce by a given multiplier (e.g. 0.5) and at the same time, see what the resulting size will be.

for example - i have an image that is 2592*1944 pixels. i would like to be able to enter a multiplier and see what the resulting resolution would be /before/ i commit to the new size. this is possible in a very old version of corel photopaint that i have and so my first question is can this be done in photoshop or do i have to resize elsewhere?

View 13 Replies View Related

Photoshop :: Cropping, Reducing, & Changing Resolution

Aug 12, 2004

I am creating a 5-page instruction sheet in Pagemaker 6.5 and have been given 26 digital camera photos to illustrate it. They are 72 ppi RGB jpegs, size is 31.5 x 23.6 inches (2272 x 1704). I'm using PS 6 to color-correct, crop and resize them.

The end product will be a pdf which will be made available on a website for students to download and print on their own inkjet printers, so I want them to be higher-res than 72.

Each photo needs to be cropped and reduced to around 2 x 1.5 inches. I thought I could use the crop tool to determine my target dimensions and resolution (200 PPI). I think that resamples them though, and the result has been rather fuzzy, printing the pdf on both a Docucolor and a cheapo inkjet. (My problem may also be in the Acrobat Distiller job options.)

When I change the resolution in the image size box (no resampling) and then crop it, it turns into something like an 1100 ppi image. Is that right?.

I be saving them as TIFFs or JPGs? When I tried saving as TIFFS, they looked ghastly on my monitor (in the Pagemaker file, that is).

View 2 Replies View Related

Paint Shop Pro :: Reducing Resolution

Oct 6, 2012

Program that I use call Sketchup. In SketchUp you draw model of a building to post it in google Earth but it can't be any larger 10 MB what makes the file size grow is the pictures that you applied to your model, (Downsample all texture files that have been used to paint the surfaces. Take each texture into a photo editor and reduce the resolution) this will supposedly minimize the file size? Is this possible when I transfer my photos from SketchUp back into Corel , how do I reduce the resolution so it would reduce my file size?

View 2 Replies View Related

Paint Shop Pro :: Save JPEG Without Substantially Reducing File Mb Size?

Oct 29, 2012

In vX1 I could save jpeg without substantially reducing file Mb size. In vX4, whenever I edit and save a jpeg file (using save & save as), it results in a reduced number of Mb's. Options in the 'save as' dialog are set at best. It would appear that PSP X4 is automatically optimising. Is there any way that the original file size can be retained on saving after editing?

View 7 Replies View Related

Photoshop :: Cannot Save In Low-resolution

Sep 1, 2012

I am using a Netbook as of now. The resolution of it is 1024x600. Why are you not aloud to "save" or "save-as" with a resolution lower than 1024x768? The weird part is, when I close a tab on Photoshop, it will ask me if I want to save and it will let me save my work as a Photoshop Document. It also makes no sense on how Fireworks will let me use "save" and save-as" with my resolution. So is there anyway I can save my work on Photoshop other than using .psd format?
 
Additionally, I transfer the .psd to Fireworks and then save my work from there. Only problem is that none of my effects (i.e. Bevel & Emboss) on layers show up when they are transferred to Fireworks.

View 8 Replies View Related

Photoshop :: Resolution To Save Work?

Jun 7, 2004

Is it the practice to save an edited photo in its highest resolution?

By default PhotoShop suggested 'medium' resolution.

What is some criteria on this?

View 7 Replies View Related

Photoshop :: High Resolution .gif Save?

Sep 1, 2006

I need to save my .psd file in a really high resolution of .gif image.

when I try to save my current psd file, it becomes really blurry.

View 1 Replies View Related

Illustrator Scripting :: Save As EPS With High Resolution?

Jul 9, 2013

When I save the file as EPS , I want to enable all the options in EPS Options Pallet.  I have enabled all options except setting high resolution in Transparency option. 

View 2 Replies View Related

GIMP :: PNG File - Enable / Disable Save Resolution

Aug 19, 2011

When saving as a .png file, there is an option to enable/disable "save resolution". What is this option for? I've tried Googling, but no luck due to many unrelated search results.

View 4 Replies View Related

Xara :: How To Edit A Bitmap And Save Back In Its Original Resolution

May 25, 2013

Should be a simple question. Using Designer Pro X I load a PNG file. I then do nothing except "save as" also in PNG format.

My expectation was I would get the same file. Instead it seems to have changed the resolution and now looks terrible.

An ordinary graphic program like paint.net or photoshop would save the same file back to disk.

There must be something I am failing to understand about Xara. How do I edit a bitmap and have it save back in its original resolution?

View 3 Replies View Related

Photoshop :: Making Low Resolution Image Look Higher Resolution For Print

Mar 17, 2013

I realize the nature of my question maybe asking the impossible, but I have a low res image I downloaded from the internet, placed in an InDesign page, blew it up and printed it out. I was going for the distressed look that it has, it looks ok when I print it out considering it's low res and I blew it up fairly large. However, it's a little too pixelated to look professional when printed. Are they any tricks or things I can do to make it look higher res for print. I've attached the image as well as a screenshot of the InDesign file so you can see it in context.

View 4 Replies View Related

Photoshop :: Convert Low Resolution Image To High Resolution

Aug 25, 2007

I am a Photoshop newbie and I have a series of graphics (all 72dpi from a website) that I would like to print in 300dpi. Is it possible to take a 72dpi .jpeg or .gif file and easily convert it to a higher resolution printable graphic? If Photoshop can't do it, is there any type of program that can?

View 1 Replies View Related

Photoshop :: Big Low Resolution To Small High Resolution

Oct 23, 2004

i have some big .jpgs with low resolution say 10x10 inch at 72dpi.

is it possible for me to convert it to 2x2 inch at 300dpi?

View 5 Replies View Related

GIMP :: High Resolution File - JPEG Image Plug-in Could Not Save Image

Aug 18, 2011

So I am making digital color prints at 24x30. the photography work is about color fields and gradients, so I need super high res files. I have set the size to 24000x30000 pix at 1000 dpi..now my problem, when i go to save the gimp file as a jpeg i get this error message "JPEG image plug-in could not save image"

View 3 Replies View Related

GIMP :: Create High Resolution Version Of Low Resolution Texture Used In A Game

Nov 17, 2012

I'm trying to create a high resolution version of a low resolution texture used in a game. I've found a pattern that I think is acceptable, from a real image.Now the question is this: how can I colorize the large image to that it is as resemblant as possible to the original one? I've tryed a simple colorize, but the result is not so good...

Original texture:

[URL]

The image to be colorized:

[URL]

View 2 Replies View Related

Photoshop :: Reducing Image To Less Than 30k

Nov 1, 2013

For a website, my avatar must be less than 100px square and less than 30k of page weight. I'm having a terrible time doing this without the photo being a blurry mess once uploaded. The first two photos are relatively heavy because they've been edited, so I thought I'd try a photo that hasn't been messed with. I notice that even that photo, at 72ppi and 100px is still over 100k in weight. It will probably also be a mess

View 10 Replies View Related

Photoshop :: Reducing An Image...

Aug 12, 2005

I have a .bmp file that is 20mb that I want to size down for ease of use with SketchUp.
The file is 3223x2200 pix
96 pix/inch

How would I do this without the image distorting radically?

I have only tried to resize the image by changing the width/height.

View 3 Replies View Related

Photoshop :: Reducing Highlights

Feb 25, 2006

I have taken a photograph with land in the foreground and sea in the middle and far ground.

I was shooting into the sun and sea has too many highlights on it.

What is the best way of reducing the intensity of these highlights.

View 3 Replies View Related

Photoshop :: Reducing Colors?

Jun 3, 2009

I've been working on some pictures that will be printed on T-shirts. The problem is that I've got alot of different color in the pictures which would result in a very expensive print. What I would want to be able to do is to reduce the colors in the pictures to only 4 specific colors (plus black and white). The colors must be very specific. for an example:  "ff2600".  To be totally clear: I need the ALL the different types of yellow into be transformed to just one type of yellow. So my question is am I able to do something like this in photoshop? 

View 10 Replies View Related

Photoshop :: Reducing Size Of Pic

Nov 23, 2006

I have a cybershot and have it set to 1280 x 960...Fine. The pictures look great but sometimes when I upload to walmart or shutterfly them become pixelated. Or when I use irfanview (PC only program) to resize to something smaller and pixelates them as well.

Should I change the camera settings, if so, to what? Should I use PS to resize them?

View 5 Replies View Related

Photoshop :: Reducing Levels

Nov 4, 2007

I want to reduce the colour levels in a picture to four, or limit the amount colours of an image to 4 colours.

I have many black and white images and I want to remove all but 4 scales of colour so that I have

White

Light Grey

Dark Grey

Black

The closest thing I have found is in the filter gallery bu using cut out and reducing the number of levels to 4 the problem is this tends to blurr some of the details as part of the effect whereas I want to maintain the crisp edges of my image so that it just looks flatter

I would also like to know if there is a method to do this and have it somewhat scaleable so I can decide on the range of colours in the current image that would fall into each of the new colour categories so that I can adjust itcase some details are incorporated into say the dark grey layer and they should be black ect?

I'm sure I have seen a very simple feature to reduce the colour range of an image, maybe that was in paint shop pro it was a long time ago.

View 4 Replies View Related

Photoshop :: Reducing Images

Jul 24, 2004

I've got a 20X20 gif image (72dpi) that I wanted to use as a "logo" on a website. When I post it, however, it expands to an image that is about 1" X 1" and it very pixelated. I've tried converting it to jpg, save for web and just physicially reducing the image to 10X10 etc. and nothing works. It just keeps showing up on the website as a larger pixelated image. What am I doing wrong? I'm just trying to get an image about the size or our emoticons on this site.

View 9 Replies View Related

Photoshop :: Reducing The Size Of Acrobat PDF

Oct 19, 2013

I have these PDF catalogs which are about 20 - 50MB each.  Some of my customers are not comfortable browsing online so a digital catalog (here) works better for them... The same people generally have bad internet connections so I need to re size these PDF's so they can be downloaded rather quickly.
 
Starting with a 20MB PDF, I open all slides within Photoshop.  I batch process the images from 300dpi to 96dpi , and shrink the size from 24 Inches across to 15... All the images are saved in a new folder, opened back in Photoshop and a new PDF is created.  Considering both size and dpi has been clipped by a fairly large amount, you would think that the new PDF would be smaller... But its not, the 20MB version ends up around 60MB afterward.
 
I don't feel like purchasing Acrobat Pro because I know this should work within Photoshop.

View 2 Replies View Related

Photoshop :: Reducing Size Of Canvas

Sep 22, 2012

I have designed a billboard and used various photos. Due to changes in the positions of the layers, I ended up with a canvas bigger than the photo. So I need to remove the extra canvas. How do I remove the extra canvas?
 
I can use the marque tool to copy/cut and paste the photo unto a new file, and hence get rid of the extra canvas. If this is the way forward, is there a precise way to get the marquee tool to the edges of the photo? Is there a function to snap the marquee to the edge of the photo?

View 7 Replies View Related

Photoshop :: Reducing Image Size (MB)

Nov 18, 2013

I have 900 photos/ scans that are all large in size. I know want to make them suitable for a web site ie 72/91dpi  and around 1024*768 px in size . thought the save for web choice via an action was the way to go  ie create the action and then run as a batch.

View 1 Replies View Related

Photoshop :: Reducing Pixels, But Not Size.

Jul 20, 2009

I have been told that you can reduce the number of pixels in a picture, but keep the size of it.I am unsure about this, so I thought I would ask the experts as it were.I do know the JPEG image compression when saving, but is there any way you can specify the number of pixels?

View 10 Replies View Related

Photoshop :: Reducing Picture Size

Mar 26, 2007

I have a Sony camera and have it set to take big pictures with high reso.

In PS, can I reduce the size 3 MB to something a lot smaller but still keep ok quality? I go to Image Size but that just makes the pic smaller (duh) I want to change the actual file size.

View 5 Replies View Related

Photoshop :: Reducing Picture Size

Dec 24, 2008

wanted to put all my holiday photos on a picture-sharing site (Photobucket), but it seemed they were too big and it took forever. It was suggested that I reduce their size on Adobe Photoshop and I have downloaded it (Starter Edition 3.2). However, I can't seem to find a facility to do this. What I would really like to do is reduce all of the file sizes at once. Is this possible? Otherwise I will reduce them one by one, but don't know how to do this either.

View 8 Replies View Related

Photoshop :: Reducing Using Image Size

Jan 10, 2009

I read somewhere that in Photoshop you should reduce images in steps, but never in one big step. For example, if you had an original 3200 pixels wide, you should first reduce it to 3100 pixels wide, then 3000, then 2900, and so on, down to about 2000; then, if your target is 800 pixels, you may increase the interval.

Does this rule of thumb still hold true in CS4? I've tried one-step reductions, and these tired old eyes could not tell the difference ...

View 3 Replies View Related

Photoshop :: Reducing File Size

Apr 8, 2008

Working in Adobe Photoshop CS. I have a tif file that is 36"x36" at 150dpi.
Flattened image; Grayscale mode. File size is 28.499MB. Is there any way
to reduce the file size other than change it to a jpeg? I need to email it
somewhere and they can't accept files over 20MB.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved