Photoshop :: Reducing Images
Jul 24, 2004
I've got a 20X20 gif image (72dpi) that I wanted to use as a "logo" on a website. When I post it, however, it expands to an image that is about 1" X 1" and it very pixelated. I've tried converting it to jpg, save for web and just physicially reducing the image to 10X10 etc. and nothing works. It just keeps showing up on the website as a larger pixelated image. What am I doing wrong? I'm just trying to get an image about the size or our emoticons on this site.
View 9 Replies
ADVERTISEMENT
Nov 1, 2013
For a website, my avatar must be less than 100px square and less than 30k of page weight. I'm having a terrible time doing this without the photo being a blurry mess once uploaded. The first two photos are relatively heavy because they've been edited, so I thought I'd try a photo that hasn't been messed with. I notice that even that photo, at 72ppi and 100px is still over 100k in weight. It will probably also be a mess
View 10 Replies
View Related
Aug 12, 2005
I have a .bmp file that is 20mb that I want to size down for ease of use with SketchUp.
The file is 3223x2200 pix
96 pix/inch
How would I do this without the image distorting radically?
I have only tried to resize the image by changing the width/height.
View 3 Replies
View Related
Feb 25, 2006
I have taken a photograph with land in the foreground and sea in the middle and far ground.
I was shooting into the sun and sea has too many highlights on it.
What is the best way of reducing the intensity of these highlights.
View 3 Replies
View Related
Jun 3, 2009
I've been working on some pictures that will be printed on T-shirts. The problem is that I've got alot of different color in the pictures which would result in a very expensive print. What I would want to be able to do is to reduce the colors in the pictures to only 4 specific colors (plus black and white). The colors must be very specific. for an example: "ff2600". To be totally clear: I need the ALL the different types of yellow into be transformed to just one type of yellow. So my question is am I able to do something like this in photoshop?
View 10 Replies
View Related
Dec 11, 2008
i'm just learning some basic 2d (i work mainly in 3d) and am in the middle of reducing/cropping some of my images so that they fit neatly on a web page. i have a couple of questions:
1. when i reduce (resample) an image, in the resample dialogue there is no easy way to just reduce by a given multiplier (e.g. 0.5) and at the same time, see what the resulting size will be.
for example - i have an image that is 2592*1944 pixels. i would like to be able to enter a multiplier and see what the resulting resolution would be /before/ i commit to the new size. this is possible in a very old version of corel photopaint that i have and so my first question is can this be done in photoshop or do i have to resize elsewhere?
View 13 Replies
View Related
Nov 23, 2006
I have a cybershot and have it set to 1280 x 960...Fine. The pictures look great but sometimes when I upload to walmart or shutterfly them become pixelated. Or when I use irfanview (PC only program) to resize to something smaller and pixelates them as well.
Should I change the camera settings, if so, to what? Should I use PS to resize them?
View 5 Replies
View Related
Nov 4, 2007
I want to reduce the colour levels in a picture to four, or limit the amount colours of an image to 4 colours.
I have many black and white images and I want to remove all but 4 scales of colour so that I have
White
Light Grey
Dark Grey
Black
The closest thing I have found is in the filter gallery bu using cut out and reducing the number of levels to 4 the problem is this tends to blurr some of the details as part of the effect whereas I want to maintain the crisp edges of my image so that it just looks flatter
I would also like to know if there is a method to do this and have it somewhat scaleable so I can decide on the range of colours in the current image that would fall into each of the new colour categories so that I can adjust itcase some details are incorporated into say the dark grey layer and they should be black ect?
I'm sure I have seen a very simple feature to reduce the colour range of an image, maybe that was in paint shop pro it was a long time ago.
View 4 Replies
View Related
Oct 19, 2013
I have these PDF catalogs which are about 20 - 50MB each. Some of my customers are not comfortable browsing online so a digital catalog (here) works better for them... The same people generally have bad internet connections so I need to re size these PDF's so they can be downloaded rather quickly.
Â
Starting with a 20MB PDF, I open all slides within Photoshop. I batch process the images from 300dpi to 96dpi , and shrink the size from 24 Inches across to 15... All the images are saved in a new folder, opened back in Photoshop and a new PDF is created. Considering both size and dpi has been clipped by a fairly large amount, you would think that the new PDF would be smaller... But its not, the 20MB version ends up around 60MB afterward.
Â
I don't feel like purchasing Acrobat Pro because I know this should work within Photoshop.
View 2 Replies
View Related
Sep 22, 2012
I have designed a billboard and used various photos. Due to changes in the positions of the layers, I ended up with a canvas bigger than the photo. So I need to remove the extra canvas. How do I remove the extra canvas?
Â
I can use the marque tool to copy/cut and paste the photo unto a new file, and hence get rid of the extra canvas. If this is the way forward, is there a precise way to get the marquee tool to the edges of the photo? Is there a function to snap the marquee to the edge of the photo?
View 7 Replies
View Related
Nov 18, 2013
I have 900 photos/ scans that are all large in size. I know want to make them suitable for a web site ie 72/91dpi and around 1024*768 px in size . thought the save for web choice via an action was the way to go ie create the action and then run as a batch.
View 1 Replies
View Related
Sep 23, 2013
My card is ready to go at the specified resolution (300 dpi) and dimensions, but whenever I save it as a pdf, it reduces the resolution immensely. The dimensions of the photoshop file are 1062x615, whereas the pdfs (no compression) are always 254x147. The photoshop file, again, is 300 dpi.
Â
The dimensions in inches for both files: 3.54 x 2.05 Obviously 254 pixels across 3.54 inches is not 300 dpi, but I cant figure out why it would do this.
View 8 Replies
View Related
Jul 20, 2009
I have been told that you can reduce the number of pixels in a picture, but keep the size of it.I am unsure about this, so I thought I would ask the experts as it were.I do know the JPEG image compression when saving, but is there any way you can specify the number of pixels?
View 10 Replies
View Related
Mar 26, 2007
I have a Sony camera and have it set to take big pictures with high reso.
In PS, can I reduce the size 3 MB to something a lot smaller but still keep ok quality? I go to Image Size but that just makes the pic smaller (duh) I want to change the actual file size.
View 5 Replies
View Related
Dec 24, 2008
wanted to put all my holiday photos on a picture-sharing site (Photobucket), but it seemed they were too big and it took forever. It was suggested that I reduce their size on Adobe Photoshop and I have downloaded it (Starter Edition 3.2). However, I can't seem to find a facility to do this. What I would really like to do is reduce all of the file sizes at once. Is this possible? Otherwise I will reduce them one by one, but don't know how to do this either.
View 8 Replies
View Related
Jan 10, 2009
I read somewhere that in Photoshop you should reduce images in steps, but never in one big step. For example, if you had an original 3200 pixels wide, you should first reduce it to 3100 pixels wide, then 3000, then 2900, and so on, down to about 2000; then, if your target is 800 pixels, you may increase the interval.
Does this rule of thumb still hold true in CS4? I've tried one-step reductions, and these tired old eyes could not tell the difference ...
View 3 Replies
View Related
Apr 8, 2008
Working in Adobe Photoshop CS. I have a tif file that is 36"x36" at 150dpi.
Flattened image; Grayscale mode. File size is 28.499MB. Is there any way
to reduce the file size other than change it to a jpeg? I need to email it
somewhere and they can't accept files over 20MB.
View 5 Replies
View Related
Mar 26, 2009
I've got a sewing pattern that was drawn by hand. It's larger than a standard sheet of printer paper (maybe 14"x20" or so). I scanned it in two pieces and matched those up, then used the pen tool to trace around the original pattern and stroked the path. Now I need to reduce the whole thing in such a way that if someone else were to download the file and enlarge it by the same amount (or trace around it with X amount of added space all around) it would match my original pattern. (Gee, does that make sense? I hope I explained it right.) I have tried changing the image size, saving it as a new file, and then opening that new file and enlarging the image size by the same amount I reduced it, but when I print it (just allowing the lines to go off the edges of the paper since it's too big), it doesn't match my original.
View 8 Replies
View Related
Jul 28, 2004
When you've got a photo which the resolution isnt that great on, you tendt to get this grainy effect. It seems to happen mainly on dark colourslike black. When you zoom in close you can see its made up of various colours. None of which generally tend to be black. Is it possible to get all these coloured pixels roughly the same colour so that you can get a smoother finish.
Ive tried various things like the heal brush, few filters etc but nothing really seems to do the trick.
View 8 Replies
View Related
Jul 2, 2008
I'm an intermediate user and I've made a logo in PS CS2 and the printer told me that it was 6 colors and that I should reduce colors because of the expense of printing (on t-shirts).
how to reduce the number of colors in my image?
View 2 Replies
View Related
Aug 5, 2009
I'm trying to make a nice photo for a couple of friends, and I have the following disturbing problem in the image:
The lamp in the background is very strong and it bugs the eye -
How do I reduce the brightness of the lamp?
I have already sharpened the image and also reduced some lens blur in the black skirt area
View 3 Replies
View Related
Jan 17, 2013
I created a 1318x358 PNG (300DPI, Anti-Aliasing - Type Optimized) from Illustrator. Now I reduced the image in Photoshop from 1318 to 800 pixels, and it is creating some edge blurring. Look at the image below.
Â
How can I take away that blurring effect when reducing the size? Even if I save it as PNG-24, with highest quality settings, it still does that effect.
View 5 Replies
View Related
Sep 12, 2013
I'm using CS6 (x64, windows), and I'm extruding vectors by a few points to make 3D models of decorative walls for our modelers. They've constantly told me that there are far too many polygons in the models that Photoshop generates (mine are averaging between 20,000 and 30,000) and that even 3DS Max's "optimize" tool can't take it down to a really managable number (generally they only get them down to around 10,000).
Â
Is there a way to reduce the number of polygons in models generated this way in Photoshop? Even the super simple ones that I extrude (with no curves at all) end up containing around 8,000 or 9,000.
View 2 Replies
View Related
Jan 13, 2013
Hotkey "," for reducing tool size is not working. Nothing happens when I press the key.Settings for text program East Asian?? I am in Western Europe (Denmark)...When I want to view a photo at 100% zoom it takes up more screen space than it should. A photo of 8.5cm width measures at 100% 26.5cm on the screen.
View 6 Replies
View Related
Feb 13, 2012
I'm using C5 Extended and have been using PS for years and suddenly I'm seeing something I haven't encountered before. My font sizes are being reduced "to the closest integer" which goes to 624.14 pt. My image is only 1000px x 150px so I'm not sure where the measurement discrepancy is happening.
I noticed it first when I made a copy of a box of text and then tried to drag the text copy.
View 2 Replies
View Related
Oct 9, 2011
In images where there's flat colour (eg book & cd covers), how do you easily get rid of any unwanted noise, without making edges blurry, or resizing down?
Take this image below for example. It's essentially 5 flat colours. How do I remove the jpegging without blurring the colour edges any more than they are? (click to see full size, it doesn't look so bad squeezed down in a forum page)
I tried Filter > Noise >Reduce Noise with no luck. I thought Posterize would work but it's too harsh on the edges.
View 9 Replies
View Related
Oct 12, 2004
I have a whole directory of images which I took with my digital camera. I want to post them on my site, however I would like to reduce their size to fit the html pages. I know how to perform this task for individual photos, but since my directory consists of many images, this task will be very time consuming.
I was wondering if there is any way to have photoshop make the same image
size reduction on all images, by running some sort of script or any other way.
If there is such a way, does photoshop also save the new smaller images?
View 1 Replies
View Related
Dec 12, 2007
how do i reduce the opacity on parts of an im age, i have tried selecting part of the image with the marque tool and then reducing the opacity but it still reduces it for the full image.
View 4 Replies
View Related
Dec 12, 2007
how do i reduce the opacity on parts of an image, i have tried selecting part of the image with the marque tool and then reducing the opacity but it still reduces it for the full image.
View 2 Replies
View Related
Apr 10, 2009
I have a slew of psd files that were saved with maximum file compatability turned which left them incredibly bloated. Is there a trick to saving them which gets rid of the overhead left by maximum file compatability short of rebuilding every file from scratch? I'm guessing 20% savings on size would not only save space but speed things up too.
View 5 Replies
View Related
Aug 12, 2004
I am creating a 5-page instruction sheet in Pagemaker 6.5 and have been given 26 digital camera photos to illustrate it. They are 72 ppi RGB jpegs, size is 31.5 x 23.6 inches (2272 x 1704). I'm using PS 6 to color-correct, crop and resize them.
The end product will be a pdf which will be made available on a website for students to download and print on their own inkjet printers, so I want them to be higher-res than 72.
Each photo needs to be cropped and reduced to around 2 x 1.5 inches. I thought I could use the crop tool to determine my target dimensions and resolution (200 PPI). I think that resamples them though, and the result has been rather fuzzy, printing the pdf on both a Docucolor and a cheapo inkjet. (My problem may also be in the Acrobat Distiller job options.)
When I change the resolution in the image size box (no resampling) and then crop it, it turns into something like an 1100 ppi image. Is that right?.
I be saving them as TIFFs or JPGs? When I tried saving as TIFFS, they looked ghastly on my monitor (in the Pagemaker file, that is).
View 2 Replies
View Related
