Photoshop :: Cannot Save In Low-resolution
Sep 1, 2012
I am using a Netbook as of now. The resolution of it is 1024x600. Why are you not aloud to "save" or "save-as" with a resolution lower than 1024x768? The weird part is, when I close a tab on Photoshop, it will ask me if I want to save and it will let me save my work as a Photoshop Document. It also makes no sense on how Fireworks will let me use "save" and save-as" with my resolution. So is there anyway I can save my work on Photoshop other than using .psd format?
Additionally, I transfer the .psd to Fireworks and then save my work from there. Only problem is that none of my effects (i.e. Bevel & Emboss) on layers show up when they are transferred to Fireworks.
View 8 Replies
ADVERTISEMENT
Sep 23, 2013
My card is ready to go at the specified resolution (300 dpi) and dimensions, but whenever I save it as a pdf, it reduces the resolution immensely. The dimensions of the photoshop file are 1062x615, whereas the pdfs (no compression) are always 254x147. The photoshop file, again, is 300 dpi.
The dimensions in inches for both files: 3.54 x 2.05 Obviously 254 pixels across 3.54 inches is not 300 dpi, but I cant figure out why it would do this.
View 8 Replies
View Related
Jun 7, 2004
Is it the practice to save an edited photo in its highest resolution?
By default PhotoShop suggested 'medium' resolution.
What is some criteria on this?
View 7 Replies
View Related
Sep 1, 2006
I need to save my .psd file in a really high resolution of .gif image.
when I try to save my current psd file, it becomes really blurry.
View 1 Replies
View Related
Jul 9, 2013
When I save the file as EPS , I want to enable all the options in EPS Options Pallet. I have enabled all options except setting high resolution in Transparency option.
View 2 Replies
View Related
Aug 19, 2011
When saving as a .png file, there is an option to enable/disable "save resolution". What is this option for? I've tried Googling, but no luck due to many unrelated search results.
View 4 Replies
View Related
May 25, 2013
Should be a simple question. Using Designer Pro X I load a PNG file. I then do nothing except "save as" also in PNG format.
My expectation was I would get the same file. Instead it seems to have changed the resolution and now looks terrible.
An ordinary graphic program like paint.net or photoshop would save the same file back to disk.
There must be something I am failing to understand about Xara. How do I edit a bitmap and have it save back in its original resolution?
View 3 Replies
View Related
Mar 17, 2013
I realize the nature of my question maybe asking the impossible, but I have a low res image I downloaded from the internet, placed in an InDesign page, blew it up and printed it out. I was going for the distressed look that it has, it looks ok when I print it out considering it's low res and I blew it up fairly large. However, it's a little too pixelated to look professional when printed. Are they any tricks or things I can do to make it look higher res for print. I've attached the image as well as a screenshot of the InDesign file so you can see it in context.
View 4 Replies
View Related
Aug 25, 2007
I am a Photoshop newbie and I have a series of graphics (all 72dpi from a website) that I would like to print in 300dpi. Is it possible to take a 72dpi .jpeg or .gif file and easily convert it to a higher resolution printable graphic? If Photoshop can't do it, is there any type of program that can?
View 1 Replies
View Related
Oct 23, 2004
i have some big .jpgs with low resolution say 10x10 inch at 72dpi.
is it possible for me to convert it to 2x2 inch at 300dpi?
View 5 Replies
View Related
Aug 18, 2011
So I am making digital color prints at 24x30. the photography work is about color fields and gradients, so I need super high res files. I have set the size to 24000x30000 pix at 1000 dpi..now my problem, when i go to save the gimp file as a jpeg i get this error message "JPEG image plug-in could not save image"
View 3 Replies
View Related
Nov 17, 2012
I'm trying to create a high resolution version of a low resolution texture used in a game. I've found a pattern that I think is acceptable, from a real image.Now the question is this: how can I colorize the large image to that it is as resemblant as possible to the original one? I've tryed a simple colorize, but the result is not so good...
Original texture:
[URL]
The image to be colorized:
[URL]
View 2 Replies
View Related
Oct 22, 2013
I am facing problem while using Save / Save As / Save for web options in my Photoshop. On clicking Save / Save As commands, my photoshop gets closed abruptly and I am losing all data. If I choose Save for Web option, the file Save dialog box appears and when I click on the 'Save' button, the application gets closed abruptly.
It was working fine yesterday. My version is bundled in the Technical Communicator suite 3.5 and I faced some problems with Adobe Acrobat, for which my IT team took support from Adobe and got it resolved just two days ago. (Case ID - 184809966)
View 10 Replies
View Related
Dec 15, 2013
I use autocad architecture 2013 and it works just fine until the save turns to qsave whenever i want to save a drawing by save, save as and ctrl+s it works as qsave..how can I turn it back to SAVE ?
View 9 Replies
View Related
Dec 31, 2013
I am having a catastrophic error in Inventor 2013.
When I attempt to save a drawing I have completed, I cannot save!
Can't save, save as or any other variation of save.
This is my issue every time I click save.
View 2 Replies
View Related
Mar 20, 2014
URL....I am using PSE 12 as a photo editor for Aperture 3.5.1 and the photo is duplicated (as a tiff) in Aperture and PSE editor opens with the image. When I close the file and say to save the file it brings up the save as window.
I tell PSE 12 to "on first save -- save over current file" it now brings up the "save as" window and won't save over the file (changes the file type from .tiff to .tif)
View 2 Replies
View Related
Jul 6, 2013
I've created an action that uses the save for web dialogue to optimise images for the web. When I use the batch command to process a full folder of images, even though I have "Override action "save as" command" checked, it ignores this and still uses the location that was used when the action was created.
Apparently this is a known issue in CS6 and previous versions but whether this has been fixed in Photoshop CC?
View 7 Replies
View Related
Jan 23, 2013
I have Photoshop CS6 and Elements Premiere 11 and both were showing estimated file sizes properly up until a couple of weeks ago, and both stopped at the same time. Using Image, Mode I have verified on both that the images I am trying to save are 8 bit and not 16 bit images. I am on Window 7, 64bit.
View 9 Replies
View Related
Jun 14, 2012
From the start, I wasn't able to save to jpeg without getting a dcm extension (no jpg extension). However, if I saved to Multi-picture Format, I would get the familiar .jpg and everything worked fine for a while. This morning I cannot find a file format in "save as" that results in the .jpg file extension.
View 2 Replies
View Related
Oct 22, 2013
After designing, i try to save the image by clicking save as, but it does not trigger any thing. even if i click save alone. it's still the same thing. Until i try to close the interface, then it will pop-up a dialog message that do i want to save before i close or not, then i click yes but it does not display png,jpeg and the likes as file extension. it only displays psd and some uncommon extensions.
View 3 Replies
View Related
Sep 9, 2013
I cannot save images from Photoshop CC as a dialogue box opens with "cannot save image.....as you do not have write access
View 2 Replies
View Related
Apr 16, 2013
When I first started using CS6 I would edit my photos and when I used "save as" to save my photos then open them in a different photo viewer they would have lost a lot of color and contrast. When I reopened them in CS6 they still had no color. This is all occured on my PC. I used to use PSE 7 (on my PC) and the "save as" function to save them and they turned out fine. I recently got an iMac and when saved on there the same way and reopened in a different viewer they'd have the correct color,
but when opened on my PC the color would be lost again. Also tried opening the images I saved on my PC in CS6 on the iMac and they still had no colo/contrast. So that would mean it's not a monitor calibration thing. I'm trying to figure out how to save my photos so they have the best quality they can have for printing and also the correct color for clients to view on their computers.
PS: I did use the "save for web" option on my PC and the photos have the correct color that way! But those aren't the proper size and stuff for printing. Also I'm very new to iMac and full photoshop so I'm not sure what sizes/pixels/color modes/etc are normal or what photos are supposed to be.
View 1 Replies
View Related
Sep 14, 2013
I'm running Windows XP with Photoshop CS6. Since the "Save" button runs off the edge of my monitor, I can't click Save. I also can't move the dialogue box up far enough to get to it before running out of screen space. I tried just hitting the enter key, but nothing happened. I end up having to do a control-alt-delete to get out of Photoshop altogether.I've never had this problem before when I had CS2 or with the CS6 I have at work.Is there a way around this?
View 2 Replies
View Related
Oct 15, 2012
I'm only on CS5. Is there a way to save a crop as one might save a non destructive layer?
View 4 Replies
View Related
Mar 27, 2013
I need to convert a large number of images to png and need to later sort them by the original date created. "Save as" results in the current date/time as the date created. CS5.
View 4 Replies
View Related
Jan 6, 2013
I have a PSD file (16bits/prophoto RGB) with some layers. I combine the layers to ONE and change the bit depth to 8 bits.
Then I do one of two things:
(a) I save the file for the web in JPEG 90% high-quality and with sRGB ... filesize 340 602
(b) I change the color profile to sRGB and save the file as JPEG in the highest quality (10) ... filesize 174 549
I am at loss here. How on earth is it possible that the second file is almost half the size as the one saved for the web?What effect causes this? It is very easy to save for yhe web but as long as the JPEGs are that bigger it's no option.
View 3 Replies
View Related
Jan 24, 2011
so photoshop totally disappointed me yesterday, i spent HRS creating a graphic and i went to save it to PNG, it said i could only save it as a copy; so i clicked ok....my graphic wasn't saved AT ALL!...what am i doing wrong???
View 2 Replies
View Related
Apr 29, 2012
when im about to save my file *project* nothings happen
View 2 Replies
View Related
Nov 13, 2012
[CS6 Extended]I want to click with the mouse on a symbol (normally it should be I disk symbol I think) to save mychanges instead of use of File->Save or Ctrl+S.
But the problem: I can't find a disk/save symbol in Photoshop andalso don't know how can I get it.On "Window" menu I can't get a word "Save" to checkmark it.How can I get a "Save" symbol in Photoshop CS6 Extended?
View 4 Replies
View Related
Nov 25, 2013
Every time I save I get an "Adobe Save For Web Error" that says "Could not complete this operation. An unknown error has occurred." Below is the system info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Mac OS 10.9.0
System architecture: Intel CPU Family:6, Model:23, Stepping:6 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1
Physical processor count: 2
Processor speed: 2400 MHz
Built-in memory: 4096 MB
Free memory: 2139 MB
Memory available to Photoshop: 3490 MB
[code]....
I upgraded to Maverick (Apple OSX) about 2.5 weeks ago. But this problem didn't start until about 3 days ago, so surely that's not the issue.
View 2 Replies
View Related
Jan 16, 2013
I have created an action where I do some stuff with the picture and then I save the file to a shared network drive while using the "Save for Web" function. While recording the action everything works fine but when I run the action I got a error that Photoshop can't save the file because the Path does not exist / Is unavailable. It is stuck while he want's to run the "Save for Web" part of the action.
I tried the mapped path (Z:files...) and the UNC path (\fileservusersdjametfiles...) but both did not work.I am using Photoshop CS5 and Windows 7 Professional (64Bit).
View 4 Replies
View Related
