I have several *.jpg product drawings to which I want to add text (e.g., product name). I open the image and the image drawing fills the space (canvas?). I want to 'pull down' the bottom border to allow inclusion of text.
View 3 Repliesshort cut to allow me to expand a text box without altering the text?
View 2 Replies View RelatedAs you can see, the image above has a plain grey background.
However, it is quite small, and I would like to expand the grey background until it is much bigger.
Also, there is white text between the red and green legs of the creatures. How do I remove that as well?
What is the difference between Expand and Expand Appearance tool
View 7 Replies View RelatedI'm trying to expand a translucent image and keep the coloration even throughout. The original image is flat on top and fades to a darker color near the edge. I've tried everything I know how to do (admittedly not much) with no success. I attached a portion of the image to make it easier to understand what I'm dealing with.
View 3 Replies View RelatedI have a scan of a book I need to read for school. The professor scanned the book face down so each page is two pages of the book and it is rotated clockwise of how it should be read. I am trying to get some kind of OCR to work on it, so I want to get each page of the book separate. The goal is to get to the point where I can read and underline text on my Kindle.
Here's where paint.net comes in. I have already taken screen shots of the pdf and split the pages into separate images using ctrl+alt+V so they are already split. Now I am trying to make them all stacked on top of each other like say a Word document would be. I cannot figure out how to expand the canvas to allow the image I want to paste in to show up. It only shows up on top of the image that is already there. I can expand the canvas, but anywhere the new image crosses outside the perimeter of the one already there, it only shows the gray checkered pattern.
For my work I use the Image Trace a lot. When I Image Trace something and then expand it, it shifts the art over. Every once in a while I wouldn't mind but it does it every time and I have to go back and nudge it back into place by setting the original layer as a template and then looking at it in Outline mode. Here is an example of the shift...
I never had this issue in any other version of Illustrator and I have been working with it since 8. When I have multiple items to Image Trace on one of my jobs and I Image Trace on each one individually, it does it in random directions. Sometimes down and to the right, sometimes up and to the left and sometimes it doesn't do it at all.
Here are the settings I am using...
I am image tracing 1200ppi bitmaps and I don't need it to be any more exact than it is now becuase I am then offsetting it .05" and using that as a relief for our products. But ignoring the shift would make one of our CNC machines mill through the art. Anything to stop "THE SHIFT" would be great. I am using up precious time in my pre-production schedule to be constantly doing this.
I have a tag block that calls out details. The attributes are the detail number and the page the detail is located. I was wondering if there was a way that the bounding box around it could grow or shrink depending on the width of the text.
Tag.jpg
I'm trying the trial version of Photoshop CS6, and I'm wondering whether or not it's possible to change the length of a shape with the amount of text entered into it, with the text still being editable? For example, if I had typed in 'hello', the size of the shape should be just big enough for the text to fit inside, without me having to change anything. On the other hand, if I typed in 'good morning', would I be able to make it so the size of the shape would change for the text to fit without having to use the transform tool?
I'm trying to make annotations for a video, and it would be annoying to have to transform to the correct measurements every single time.
Using photoshop, how do you make a selection out of a text and expand the selection?
View 4 Replies View Relatedway to expand portions of clothes in a picture. For example in this picture, I want to know if it is possible to make the uniform of the girl look like a long sleeve uniform.
View 5 Replies View RelatedI'm creating a sign. I started from a font, then converted the text to a shape to provide the sign maker with vector art.
Some of the lettering is metal-like mounted on a dark acrylic backing that 's supposed to create a 3D stroke-like effect. In the original design I actually had a stroke on the lettering to mock up the effect. But now, in order to seperately cut the letters and the backing, the sign maker needs vector art for both the metal-like lettering AND the backing pieces, which extend another 1/8" beyond the metal-like in every direction.
I duplicated that shape to create the background. The background needs to be 1/8" bigger in EVERY direction, so that when the metal-like letter is mounted on top of it, the brown background will create a stroke effect:
I need to grow every border of this brown B by the same amount--the exterior as well as the 2 interior edges--so that when the yellow B (above) is placed on top of it, the brown shows a 1/8 "stroke" around the yellow B. I tried doing a straight transform, but that doesn't achieve the desired result. Another poster in the forum (answering a similar question) suggested using Modify > Expand, but I can't get that to work (the command is greyed out for some reason).
When I expand the brush in paint, clone etc as it kets bigger about 75% of the circle edge disappears.
View 5 Replies View Relatedfor some reason i am unable to contract/expand my selection area when i highlight the entire area. I havent had any problem with this before. Does anybody have any idea what may fix this? perhaps i hit a wrong button or something.
View 4 Replies View RelatedSome time ago the tag list in pse 9 collapsed, and I don't know how to expand it.
View 1 Replies View RelatedI'm using CS4 on the Mac. A feature that I use quite a bit is expand selection.
When I do an expand selection even on a simple shape like a square the selection expands but the new selection has chamfered corners, or angled corners. I don't want this I just want clean 90 degree corners.
I've tried everything I can think of to change this, I've even returned to the factory defaults and it still does it.
For some simple selections you can just modify it manually but for more complex ones you can't.
In CS2&CS3 when expanding current selection the final one has rounded corners - with more pixels the expansion is, the more rounded effect is visible.
View 8 Replies View RelatedAny ideas how ot fix this? Every time I try to enter text, the edges of the text is surrounded/selected with lines going around it....how do I stop that and have it stop turning my image red (Its supose to be brown, until I click it then it turns red), it isnt even using the correct colors that I set it at.
View 2 Replies View RelatedUsing Elements 9 I was adding black text to a .jpg image. Somehow during the process, the text being entered defaulted to a "wavy, illegible set of characters". Spent 30+ minutes looking at FAQs and have given up. I want to reset to default simple clear black characters. Closing and restarting Elements does not resolve this issue. When ending a newly entered set of text - still get "wavy, illegible set of characters!"
View 6 Replies View RelatedI am setting a book in Indesign CS2.I use "Text frame options" > align > justify on all my pages. On a page that was so justified, I inserted a picture using the "text wrap". Soon as I did, the text stopped being aligned along the foot of the page (which looks rotten, because the facing page is justified and so the spread is now no longer aligned.
I tried to I use "Text frame options" > align > justify again, but now the option to align is now greyed out.
I am using Designer Pro 6 and suddenly my flyouts will not work. what might have been pressed . I have re started both the computer and xara to no avail.
View 6 Replies View RelatedFor a number of documents I inherited from someone else, I'm having trouble expanding layers. The topmost layers appear, show proper thumbnails, and are named appropriately. However, there is no little "disclosure triangle" or whatever that thing is called that allows you to expand the layer and see sublayers and items. I've tried duplicating this behavior with other documents and with a new document, but the problem only occurs with these certain files.
The files were created in v13 of AI, and I'm using v17 (CC) to open them.
If this is some sort of bug? I tried using "Locate Object" to force the layer expansion, to no avail. I also tried "Release to Layers" commands, also to no avail.
How to expand the grid, well over comp size?
View 6 Replies View RelatedThis Q must be very old. Why can´t someone invent a sigle button for this I have tried all the things by the book but still when I try to lay text image with white background over an image the white is still there althoug I made it transparent. tried to sa for web as png-8, png-24 and gif. nothing works. To use magic wand gives bad result when applied to text? So what can I do? I am trying to place text over image. I know I could write it over the image but I need the text as a transparent layer some place else.
View 6 Replies View RelatedI use Paint.NET for cut background from photos of Mask for this nice project: Masks In photoshop i can use expand selection for cutting 1 pixel more then i just selected. In Paint.Net i usualy skip this step and images has white/black thread around the mask.
Example: [URL]...
How to correct this problem, is there way to expand selection for 1-3 pixels ?
How do expand my printable area? I'd like the border of my drawing to be about 1/4" from the edge of the paper but it gets cut off at about 3/4" away.
View 7 Replies View RelatedI'm using the 16.0.0 version of Illustrator CS6 and i'm really new to it. Under the Object menu, I cannot find any Expand-function that I've been told should be found there. Is this option only appearing in object menu during certain circumstances?
View 1 Replies View RelatedI have a question about expanding appearance and multiply. I work in print-on-demand, and one of the limitations is that we can not use multiply on artwork. In order to achieve a similar appearance, when I receive these kinds of files, I flatten transparency, and that will sear in the way the multiply effect is interacting with the other elements of the same art file. (in the example below there are no interacting elements) However, if it is intended to interact with the background, I have to fiddle with the cmyk values (adding k) and opacity level until it is as close as possible. It is time-consuming.
we use 'expand appearnce' instead, and I tried it once and it worked! It did all the legwork for me; it spit out a different cmyk value and opacity level that mimics the effect of multiply, so I don't have to calculate it manually. However, I can't get it to work again. Illustrator thinks it is already its simplest form of appearance and will not expand it further. I've tried adding another effect and expanding but it will only expand the effect and keep the multiply.
Maybe she and I were both tripping when we thought it worked once? how to expand the appearance of multiply? Here's a picture of the 3 methods I'm speaking to: on the left is multiply, the center is flattened transparency, and the right is achieving a similar effect of multiply with opacity & color build.
My lightroom WAS working perfectly - I have not been able to expand the export menu (to view the other options such as resizing and whatnot) I am completely NEW to lightroom so I am wondering if I did something to screw it up but i did a full reinstall and it still isn't working the arrows show up along the side to expand it - but it will not expand?
View 9 Replies View RelatedIm placing multiple instances of composition A into composition B. I've applied various filters to each instance of composition A. I would like to "expand" each instance of composition A within compoistion B so that I can alter each element seperately.
View 3 Replies View RelatedIs there a way to expand the constraint window so that I can see my entire parameter formula? In the image below, my equation is cut off in the "offset" window. Or am I supposed to be inputting the parameters in some other manner?
View 9 Replies View Related