processor AMD 64 X2 Dual Core Processor 5000 or Intel Core 2 Duo E4500 2.2 GHz
2GB Ram
SATA hard drive 250GB +
128MB ATI Radeon HD2400 Pro Graphics card or 256MB ATI Radeon HD 2600 XT
Samsung 22inch SM223BW
A3 inkjet printer?
A3 Mustek scanner
Wacom Intuos A4 Tablet
I need to connect a rapport with others(print on fabric for textile industry). It looks like a mosaic, however the pieces doesn't connect side by side at the same height, but side by side sometimes higher, sometimes lower
.
The thing is: when I try put then together the limit of the layers create an edge that prevents connection.I'm sending some images to try to make this clear: 1- all layers together with the thin line between the 2- closer to junction 3- closer 3200% to see what really happens.
When the image is magnified 3200% we can see clearly that this "crack" is actually the edge of the layer that has become a bit clearer, then edge with edge, it creates an impression that there is a line in the overall picture. And I can not just cover it because each layer will be duplicated automatically by a machine rapport. So is there any way to make the edge of the layer does not check clearing?
How can i use different pictures in print and merge. It there any option or method to merge with dirrent pictures.
I am createing diffrent I cards where i made a text file for name address phone no etc. and using print and merge option it is printing text fine. But i need a method to insert difrrent pictures on card automatically.
I work with textiles and have to deal with fabric texture and wrinkles in Photoshop. The workflow involves applying a guggasin blur, grain and motion blur. This produces an acceptable result which is not realistic. Sometimes I use the mezzotine filter to reintroduce the fabric texture lost during the blurring. additional recommendations to deal with fabric wrinkles?
View 2 Replies View RelatedI can't seem to find how the original creator made this effect and he isn't around anymore. As you can see, the horizontal lines make the image appear as a ribbon and I just can't get the same effect.
View 1 Replies View RelatedI have some geotextile sheets of specific dimensions (that's 45mx5m) and a surface (not a regular one) with grades ranging from 3.5% up to 34%.I would like to "fit" those sheets on the surface (which should overlap one another by .30m (see attached image)) but not project them, (that's why I don't believe "drape" is the proper word).
Meaning that since the 45m dimension is facing up/down slope, the length should be less in projection (see attached image) and that should be calculated automatically since the surface is a very irregular on (not like the attached dwg which is included as an example).
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedI just bought Designer Pro 7 and I was wondering if the following plugins will work with it and how do I get them into the program:
Alien Skin Xenofex 2
Eye Candy 4000
I'm just learning the program (upgraded from Xtreme 5 Pro).
My 59-year old eyes mutinied on the dark skin of Designer Pro 6. how to change the settings back to the original light-gray theme.
If I upgrade to 7 is the same option available? How would I do it?
What is the easiest way to open/import SVG files in Xara Designer Pro?
It's funny you can export as SVG but I cannot find SVG format when importing graphics.
My current workaround is to open SVG files in Illustrator, select, copy, jump over to Xara and paste as enhanced metafile. But what if I don't have Illustrator?
When ever I export to PDF from Designer Pro 7 a graphic ends up in the PDF file that isn't any where in the Xara doc. It happens on most files exported from Xara but not all. It also happens on both my laptop and my desktop PC. I'm pretty sure it used to happen in WD6 so it may stem from there.
I've attached a PDF exportd from Xara, you shouild hopefully see two black.. um.. cartoonish feet / foot prints. God knows where they came from, I must have imported them at somepoint. You should also notice they only appear on the first page of a document.
I've tried searching for just outlines in Designer pro but nothing.
Is there an .INI file or cache file I can clear?
I haven't tried a re-install yet as it happens on two PC's so can't see it being that.
does the new xarapro have a linked feature for placing 300 dpi images into a 50-60 pages? If not, is it even possible to have that many pages with those numbers of large size pictures? Just wanted to know if others have done such a thing. Also if possible, can a large document be divided into number of xara files and then exported as pdf and put together in adobe acrobat to make a large output for printers?
View 6 Replies View RelatedI noticed that when exporting a trifold to PDF, that a transparent PNG file contained in the design, actually has an opaque background, not transparent. I have used Commercial Printing as the export mode and played a little with custom settings.
View 7 Replies View RelatedIn first place, I wanted to know if there's a way to import dxf in Xara Designer pro 7 ?
View 3 Replies View RelatedSo I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).
we updated from corel 14 with smart designer to corel 15 with smart designer 4.5. Corel is crashing almost continually and is running slow. it is on a dell workstation running a xeon processor W 3503 @2.4 GHZ with 4 gig of RAM with windows 7 professional with service pack 1 32 bit system. We have defraged the system, ran a registry cleaner, rebooted etc..
View 1 Replies View RelatedI exported a drawing (Clipper ship drawing) from TDX5 to CorelCAD .dwg format.Here are some first findings/remarks:
1. Bezier curves are displayed as "segmented" lines - should be bezier curves or adapted splines. (My Clipper ship drawings contain hundreds of bezier curves next to B-splines).
2. Texture fills are not displayed properly, only fragments and on wrong places.
3. Hidden layers are exported and shown - there should be an option to indicate whether a hidden layer should be exported or not. Better still in CorelCAD a hidden layer should remain hidden until a "show layer" command is issued. Now you have to delete a hidden layer before exporting the drawing. (My ships drawings contain many layers, many of them often hidden).
I would like to export my Corel files and parse them myself with C# code for display in Microsoft’s WPF. I've tried this with SVG files with mixed success. Any resource that explains the coordinate system of Corel's SVG export data?
After parsing corel SVG paths, I've noticed some odd behavior. Here are a few things:
The position of a Corel graphic on a page prior to exportation affects the size of the graphic in the SVG file?
I get negative numbers (x y points) in the SVG file when corel numbers are all pos. The x,y values seem to be flipped to y,x values.
I have a large volume of our own clip art that I need to put on line via Microsoft's WPF (windows presentation foundation) all of which is saved in CDR files .
I want to add image file to a cdr file using c# code.
View 4 Replies View RelatedCan't seem to get even the simplest CoreCad file to export to Designer X5. It appears to go through the conversion process, and then comes up "failed"
View 2 Replies View RelatedIf I type some text, then select the 'Selector Tool', then use the middle 'bounds handles' to resize.I would expect the text to be stretched.But, what I get is resizing in both horizontal and vertical directions. As if I was using the corner 'bounds handles'.
It works as I would expect in Designer Pro X.Is there a setting I've missed somewhere?
When I make a brush how can I save it for other projects. I have tried saving it with a template but it is gone next time I open the template.
View 5 Replies View Relatedi am just testing Designer Pro X 9 (have Pro X) and when trying to locate PS Plugin folder, i get the window "currently no 64Bit (8bf) support" "choose the 32Bit Version". I have Av. Bros. plugins, which are also available in 64 Bit.
View 9 Replies View RelatedIf you want the blue look on your Designer Pro X9 icons!
EDIT: In case it's not clear. Both icons are in the zip file.
how do you change the tool bar buttons to small buttons? The options are all greyed out! I am old but not that blind yet. This is a work stoppage, and abandon software problem for me.
View 9 Replies View Relatedi am getting new operating system and unregister Xara from old Windows, and reinstall it in new Windows 7.
View 3 Replies View RelatedI noticed that animated gif that I put into other web builders load fine, show cleanly.Yet when put into XDP6, the same graphics get a ghosting effect.In other words, after letters have cleared the screen, a remaining unintended outline remains. The graphics are clean in previews, viewing directly, using other web builders, or on other sites built with other software.
Today I visited the New Features page for X3D7 and had the same issue with the gif on that page too. (attached screenshot for reference)I am using win7/64bit, 8gb ram, hi-speed internet connection, don't have anything set in the browser and no browser "helper" that is adjusting image quality. This problem is only seen in Internet Explorer, not Firefox.Is there a setting in XDP that needs to be adjusted so this doesn't happen?
I still want the web stuff ripped out.Easy, delete the HTMLfilter.dll and remove the web related buttons from the tool bars.
View 9 Replies View RelatedI am wanting to use XDP as a desktop publisher and can't see any hints on table creation. There are lots of other useful word processing functions but not tables AFAICS.
View 9 Replies View RelatedI've created 3 separate files in Designer Pro 6; haven't been able to figure out how to merge them.
View 4 Replies View Related