I’m trying to open an image shot in RAW (Canon 10D) in PSCS and the screen, with my image, is larger than my monitor screen, so I have to move it around by grabbing the blue bar at the top and even then the adjustment controls on the right side of the screen are cut off. I’ve tried changing the screen resolution, which helps reduce the screen size but the adjustment controls are still cut off about half way. This is the first time I’ve tried RAW in PSCS (been shooting JPEG). I’m using Windows XP Pro if that has anything to do with anything.
I've spent ages designing only to notice on my crt the colours are different and when printed the colours are watered down and doesn't match. So I have no idea how the client will see the design.
I know this is a well-known issue but how best can I get around it?
I just noticed that my other monitor was viewing the image 'messed up' because it wasn't 'actual size' within the picture viewer. All looks fine now, but when printed the colours are still different, so my question now is:
How can I make my photoshop psd print out in the same colours as what I see on screen? (or as close to?)
I got some shp files from different sources and I tried to connect all together to a new (MAP 3d 2010) .dwg file.
Besides the two different positions, the size of one is too bigger than the other. However, when I use mapdist command, the measurement are practically the same.
I figure out that I can deal with some of those shp files when I assign LL coordinate system, but other files run when I assign UTM coordinate system. For example, using buffer command.
There is no defined coordinate system in any of the shp files I have.
What should I do to overlay all features on the fly?
the batch conversion tool can't handle long file names as generated by the Windows Live Photo Gallery import tool. I was shocked (dismayed?) to see that my brand new X5 doesn't import DV as nicely as this free MS tool (as an aside). Here is an example filename: "Tape05 2001-01-02 14.05.33.avi". It stumbles on the first '.' it finds. Luckily it does not overwrite files that end up having the same name because of this truncation but still. Come on now. Path manipulation is junior engineer programming 101.
The batch convert also does not remember the target directory last used. At least default it to the source directory, right?Unlikely to be fixed, I know, but maybe it'll go on the list for X6.
So I am trying to set up a mouth rig using joints. How would i go about smoothing my mesh, and still be able to go back and edit the joint weights without having to deal with a ridiculous amount of polygons? Â [URL]....
This video kind of shows what i am looking for, the guy is editing a minecraft character rig he has. At around 4:30, you can see him editing the skin weights on a low-poly mesh, even though he tested adjusting the shape of the mouth when the geometry was in a smooth state, the video is timelapse so its very hard to tell what he did to achieve this. Note that he is also not redering in mental ray, so he is not just using smooth mesh preview.
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
when I got my first Macintosh IICX and all of my MacPaint clip art. I don't want to get rid of the clip art because since I'm still using a black ink printer and not upgrading to a color one, the clip art looks nice in newsletters and the like.
Up until this time I had been using SuperPaint which had the New Superbits editing plug-in to refine the pictures so they had the smoother and cleaner lines instead of looking jagged. With my new computer and printer, I'm also getting Photoshop CS packaged with Adobe Creative Suite Premium, which I have never used before. Since I have not received my order yet, I was wondering if anyone could tell me whether Photoshop has the capability of improving the older MacPaint clip art like SuperPaint did with the New SuperBits editing plug-in. Over the past two days, I have been trying like crazy to back-up my pictures with SuperPaint and then re-saving them with Graphic Converter. It's been so incredibly slow that I thought I would go ahead and ask you, the experts, if Photoshop can also improve the quality of my older MacPaint clip art or if I should continue to back-up my clip art like I have been doing.
I have just got back from the Elbow gig and pulled the images off the card. They load up in Bridge but don't have actual picture thumbnails. They are named correctly, ie: IMG_3483.CR2 but they won't open!? Error message says 'Could not complete your request because Photoshop does not recognise this type of file'
I could see them on the back of the camera.
mac users... i did a software update the other day and I noticed that there was an update for ACR. Could it have been something to do with that? And why can't I find ACR in my Applications?
I use Photoshop Elements 11. I am trying to upload photos to a website and the browse only goes to Windows/Pictures. How do I navigate to photoshop to upload pictures there?
of Adobe Photoshop v6.0.1 (quite old, I know, but it do all I want and on my old HW I did not plan/want to use any more recent version, because they are HUGE and with just a little preferences trick, I did not need to reinstall my PS - ever ), yet as Czech user, I need my software to type some special characters as well. These are looking like this: Â [URL]...
Now the only problem is, that some of them PS just refuse to type. Seven small and seven caps are just wrong. See the line "for PS:"... Â I battled the problem even by editing the fonts itsels, because that seems to work with Adobe Illustrator, yet this also cause the edited fonts to be useless in another programs. So I looked deeply and in the Adobe settings in directory Fonts / Reqrd are directory CMaps and perhaps editing the character map used will be better and usable solution? how to do it or even determine with file from the 96 files in the CMaps directory are right now used by Adobe Photoshop?
Everytime I open my CS6, it always show " Could not initialize Photoshop because the preferences file was invalid (it has been deleted)" I reinstalled it but it is still popping out.
when I try to save a tagra file with a alpha channel in photoshop 7 the box for the alpha channel is greyed out, with an warning sign next to it, and the line below stating "file must be saved as a copy with this selection" When I examine the saved file the alpha channel is not there!
Has anybody got any idea why?
My old version of photoshop 6, allows you to save alpha channels!
the soft edge feature of the eraser and the brush no longer work. I can go into the pallet and choose a soft edge eraser or brush, but it comes up hard edge. When I try to use the marquee box with a feather to get a soft edge, I again get a hard edge. I've used this technique a lot, so I think I'm doing the method properly. I have removed the preference files a number of times and have trashed the old Photoshop and reinstalled Photoshop 3 or 4 times,
I am working on someone elses computer and the Software settings are different. The old owner does not use this computer anymore. The swatches are set and I would like it to function how it usually does, etc. I mean, even the transparent swatch on the tool bar is not there anymore, so when I use the pen path tool, I get these white and black fills which makes it difficult for me to see the path I am meant to be following.
How do I reset Photoshop so that I can customise it the way I want it? Reinstalling the softwares is not an option.
I would like to reset Illustrator, Indesign, Dreamweaver, etc.
I'm having trouble with my zoom tool. If I have multiple Photoshop windows open, when I go to either zoom in or out of the top window... ALL the other windows mirror what's happening to the top window.
I am having in Photoshop CS2. I have had CS2 for over 2 years and have never had this problem. I am not able to open Photoshop CS2. I am getting a message that reads "Could not initialize Photoshop because a required resources text file is missing. It goes through a series of " could not load default contours, styles, custom shaphes because the file could not be found" before getting to the "initialize" window.
I scanned a picture on Microtek scanner and was tranfering it to photoshop when I saw photoshop embeded profile mismatch that has use the emdeed profile or covert document's color in the working space or discard the emdeed profile. which embeded profile do you use for the photos? I attached the shot of the embeed profile from photoshop.
After scanning and opening a paper doc in Photoshop the image is distorted- ie its because i usually scan photographs for manipulation, i know this is due to scanner settings but i don't know how to change them there.
I have to build a website named Hollywood Movie Wallpaper . I've already gotten the pages done using adobe photoshop. This means that I know exactly what I want on each page and I've done the whole page by adobe photoshop. However, most website host needs the file to be in html in order for it to appear on the web. Is there any way to change an adobe photoshop image into a html file without changing the layout or anything? Coz it was hard work designing the layout and inserting the content into adobe photoshop image.
A co-worker needs to be able to access certain files that I have created in Photoshop CC. These files are saved as TIFFs, and as part of my workflow, I have just about everything in Groups. She currently has Elements 10 on her system, but that absolutely does not permit access to the Groups and the components within. Because of her job duties, I cannot necessarily justify adding her to the CC account since she does not need PS, AI, ID, or any of the other applications as I do. However, I can easily justify upgrading her to Elements 12...provided it does what we need it to.
any editing I do in photoshop will now seem to need to be manually added to Lightroom...which I do not even want to contemplate. When I rightclick on an image and select Edit in --> Photoshop CS6, nothing happens...Photoshop does not open as it used to. I'd thought it might be Nik Collection trial or OnOne photo suite trial I'd installed, but I uninstalled both and restarted my computer, and the problem still exists. I'm using the current creative cloud version of both lightroom and photoshop.
i am going to design a Logo for one of my client. the logo will be like an rounded shield. URL....i can write the text on upper side of te shape which is "Center for Employment Training. Please see the image. on image where this text is written on bottom of shae "Skill Training. Human Development" how to write that text . i tried to wrap the text using Arc option but the text goes stretched.
When I use the spell checker in Photoshop CS5 to check a text layer, it always tells me there are no errors, even when I know there are, so it's a useless exercise. Where is the spellling dictionary installed, and how do I make sure it's working properly?
I currently use Photoshop CS2, but I also encountered this problem on Photoshop Elements 4.0.
Whenever I am working in Photoshop, my blue looks purple, my red looks orange, but my green seems ok, however when I save it, the colour is different. I know it is not the gamma because that affects everything, not just how Photoshop looks (I'm pretty sure). If someone could help me and tell me how much of a loser I am and give me some simple solution, that would be great because it's a pain not being able to see what it is really going to look like without saving it and looking at that.
Here is what I am talking about, a screenshot and the saved .png: ....
"Adobe Photoshop has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I have uninstalled/reinstalled Photoshop and still get the same message.
DELL XPS 420 Windows Vista Home Premium. 3GB RAM Adobe CS3 Design Premium
I made a graphic, hosted it on a site, and looked at it in a browser. For some reason, the colors in the image look darker than how it does in Photoshop.
What do I need to do to make them both look alike or maybe I should be asking, "How do I make Photoshop display the color it will show as in a browser?"
If it's any help, I'm using a working space of "Adobe RGB 1998." Is this correct for web design work?
