I have a .PSD with 43 layers that I want to export to separate files. Works just fine using Scripts > Export to Layers...
...except that there are some transparent areas in each of the layers that I want to have a specific background color (the same for all 43 layers). PS keeps making those areas white.
Setting the background color in the toolbar seems to have no effect.
I have now exactly the same problem as below with over 1000 images, I have saved them in .psd that has over 100 layers each. On top of those there is curves and levels layer that affects every layer below. I want to save all images to .jpg for videoedit with those curves at least. I don't want to merge same curves 100 times. Is there a solution in phothoshop cs5 or cs6 available? Would save alot of working hours. All I have got by this far is blank white images of adjustment layers and non adjusted jpg-files.
Â
This discussion was opened in 2010 and I quess this is same problem:
"
How to merge adjustment layers to hundreds of layers?
Jul 28, 2010 10:38 AMSay I have a photoshop File with 100 layers.Â
And say I created 3 adjustment layers on top of those 100 layers to get the adjustments that i want for those layers.  I'm happy with the adjustments but Then I NEED to merge those 3 adjustment layers to ALL those 100 layers. Â
Is there a way to easily permanently apply the adjustments to each of those layers without having to do it manually? I absolutely need to merge the adjustments to the seperate layers because of how the layers are being used in a seperate 3d program.  Â
Â
So far what I've been doing is duplicating the adjustment layers for each layer and merging them to said layers separately.. I wish I could just right click the adjustment layer and Tell it to merge to everylayer it affects or apply to every layer underneath it!
I'm now using WIN version of AI CS6, and I've used CS4, CS5 before.Why does AI CS4(and the newers) export transparent PSD files which are always with blank transparent thin border(about 2~3px) line in the right and down side ?
Â
This situation hasn't happened in CS3 and CS2.The PSD files I intended to export are about A4 size with 300 dpi, sometimes with 150dpi, in RGB/CMYK/Grayscale color modes.
I do not have the option to 'export layers to files' on my menu. I used the bridge to import files as layers. What 'comps' are but that seems to be my issue.
View 2 Replies View RelatedI've been chasing this Layer Export Nirvana for a couple of years now but I've got nowhere.In ImageReady 2 I could import a PSD file and export layers with exactly the name I used for each layer (with no annotations, prefixes or suffixes), with the entire file size (not cropped to the edge of the image) in a PSD format.The script in Photoshop adds extenions to the file name that I can't see how to turn off.
Â
I've tried a couple of free (SciptsRus) and commercial (Ferry) scripts but they don't seem to work with my version of Photoshop (Mac CS5 OS X 10.7.4). Is this a result of the recent Javascript updates with Mac OS X 10.7? I'll contact the authors of these scripts next and see what they say.
Â
I tried a PC program called Super Layer which exports to PNG files and almost was what I wanted except it cropped the file size to the size of the image. I could get away with this I suppose if I copied a 1% single pixel into each corner of the file but that would be time consuming for all the layers I need to export (500-600) and means I'd have to rasterise the type layers which is also double handling.
Â
I've even tried Graphic Converter on a Mac but can't get that to quite work. I end up with solid white backgrounds and no transparency.All I want is to open a PSD file (preferably on Mac OS) and export each layer at the same size on a transparent background with just the name of the layer as the file name as a PSD file. I'll alos accept .PNG format as well as long as I get transparency and full file size. Just like we could do with brilliant effeiciency with ImageReady CS2. I've actually kept an old version of ImageRady on my PC for just this purpose but surely in the 21st Century there is a way around this?\
I'm working with CS5. I'm trying to export layers of a single PSD file to individual jpeg files, but I want to keep the manipulations I've made on each layer and multiple layers on the exported files themselves instead of each manipulation being exported as its own file. For example if i change the brightness of all my layers and then go to scripts and "export layers to files" the layers do not keep the change in brightness. Instead it keeps the original brightness level and a JPEG file gets created just for the brightness itself (it looks like a blank sheet).
View 3 Replies View RelatedI am trying to use the build in photoshop script [Export Files To Layers]
I have 17 layers with two adjustment layers on top (the adjustment layers are changing the Hue/Saturation and the color balance.
When I use the script, I get 19 layers (jpg's of the adjustment layers as well)
and their settings are completely ignored (the pictures look like what they did with out the adjustment layers) I tried both options for Visible and ICC profile- no change.
I have a whole bunch of layers (thumbnails with transpanacy in Bg). I'm using this script to get them in their own files.
Worked great except that each thumbnails is behind a large white BG now that has to be cropped out. any tips on how to get this without the white?
I'm having an issue with the script "Export Layers to Files."
When running this script, it does something I wasn't expecting...
When it saves each layer to a file, instead of using the size of the layer selection, it saves the layer in the workspace size.
Example: Try to export a 998x60 footer image... it takes the layer and saves it in a workspace size of 1010x1410. So now I've got my footer image inside of a giant white box.
Basically, I was hoping to use this as a mass-export for web design images... but it's not working the way I had hoped. =
Anyone have any solutions?
The menu options export and export creations are both disabled / greyed out. I'm trying to save multipule layers to files.
FYI: Windows 7 64 bit, no scanner attached, installed optional twain plugin from C:Program Files (x86)AdobePhotoshop Elements 12optional plug-ins... no change.
Â
Do I really need a scanner to export multiple layers to files? Do I really need to save each layer to a file manually?
I have a file with 181 layers and need to export 180 individual layers with 1 other layer switched on (so 2 layers on in each export). how to do this with an action or script?
View 5 Replies View RelatedMy version is Corel Draw 12.
I started this exercise off using New from the File menu and then Imported a .png photo. I then feathered out the edges of the photo.
Now I have spent many, many attempts to try and Export this photo (in Corel Photo Paint) as a new .png file so that I can then use it later with other packages e.g. with the hopeful intention of it having a completely transparent background for use with say Power Point. I want the ability to take the new image with a transparent background and place it over an existing background in say PP so that the background "bleeds through" the feathered edges. What is happening is, the feathered edges that I created are no longer transparent when the image gets exported out of Corel Photo Paint as a .png file. They show up as a white glow. I was successful if I followed the steps as given by "Hunter" but I had to create the image wholly in Corel Draw using the transparency tool which does not seem to allow for feathering of the edges of an image. The only way I can see to feather the edges is by using Corel Photo Paint but then I don't get them transparent when I export the file. If I was to create an image with say a circular hole in the middle of it with NO FEATHERING ...sharp edges, all would be fine.
Is it possible to do this in Corel Draw 12?
1. Is there a plugin available to export files as pdf?
2. How to make a section of a pic transparent. I've spent a couple of hours on this now, and I've searched the documentation section, and I've searched the forums. Most specifically, how do I set a transparent color for a gif? But how do I make an AREA of ANY file transparent? One thing I tried to do was use the "Wet Floor Reflection" plugin, and it requires a transparent area below the existing image. I couldn't do that, either.
can you export layers with the layer names to separate jpeg files?
Â
I have a photoshop psd file with many layers that I want to export to separate files with the new name of the files being the same as their layer name. I have the following programs:
Â
Using Photoshop CS4?
Using Photoshop Elements 7?
Using Photoshop Elements 12 (Trial)
Any way within AI CS4 to export layers to separate .ai files? Or third party plug-in to do the same? Preferably retaining the layer name as the new file name.
Â
I have a layered .ai file with 40 layers of logo versions that I need to export to separate files and I'd like to avoid the obvious "save as" and delete layers route.
I want to add the same 3 adjustment layers to about 20 photos and then in scripts, export layers to files, so that each photo includes the adjustments.
View 6 Replies View RelatedThere used to be a very useful function in CS2 under Help which was Export Transparent Image. What happened to that function in CS3 and how the hell do I export transparent image now in CS3?
View 39 Replies View RelatedI just upgraded to CS4 and have come across something curious. In previous versions, to export a transparent image, you would go to "help" and select "export transparent image." No such thing in CS4 (that I can find).
I am trying to create a transparent image to place in InDesign so that I can wrap text around my image. But when I save it as a PSD, it doesn't allow the text wrap.
I am trying to create a tag/watermark to use in Lightroom. Everytime I try to create the backgroung to be transparent when I export it as a JPG it adds a white background? How do I export transparent images/text?
View 3 Replies View Relatedi had a layer with text on it that was pretty transparent. if I cmd + click the layer i usually get a selection around the text, but somehow because of the transparency it selected very little of it, even though I can clearly see the letters very well.
Â
then i tried adding a clipping mask above the transparent letter with a bit of color and the clipped layer would not eve show up. I had to unclip to see it.
I have a very simple psd image. It has a transparent background and 3 short text phrases, each in its own layer. I need this image with transparent background for a website. When I use the Export Transparent Image function and save as a PNG, I get a white background. I've been messing with settings for over an hour.
View 12 Replies View RelatedI'm having technical issues with Photoshop CC, it is displaying solid fill layers as transparent, even though they are showing up correctly as solid fill layers in the layers panel.
View 5 Replies View RelatedI'm having an issue with the Liquify Filter's final results. When using the filter it works fine, and if I use the filter on a solid layer its results given back to the original image are perfect also.
Â
However, using the filter on a layer that has mostly transparency behind it (a layer with sketched line-art on it for example), the result given back to the original image is brightened significantly. The only work-around I have found so far is to merge a solid colour background to the transparent layer, and then the result works fine. However this is not desirable because future use of the image as line-art requires editing to get it back onto its own layer that can be destructive when the work contains toning.
I'm working with a stock image of a girl in a dress, and I've dealt with this problem before; part of the background is visible through translucent parts of the dress, and her hair, which cannot easily be fixed with magic wands and with polygon selects. The background is a neutral grey, while the final product will have a mixed green and brown background. (earth, trees, foliage)
Is there a way to make a layer mask based on the degree of a certain color? For instance, the closer you get to this neutral grey color, the more transparent? The way I've solved this in the past involves extremely careful deletes and extremely careful erase-brushes at 2-10% flow rate.
Im sure there must be something im missing here with the PNG export settings. I like the way the new export window appears but I cant figure out how to export from Draw to a PNG with a transparent matte of a color picked color.
How I did it in X4 was to chose to export to PNG, and when the window appeared to select a color for the transparent area, a color picker was used. Whatever I do with X5, i cant do it .
I am just a starter with Illustrator CS6.
Â
Currently designed a logo in CS6 and for my client I saved it as a PDF.
Â
But my client complain that there is resolution error and also he needs the PDF contain only the Logo but not the white area around the logo.
Â
I have searched many place but not sure how to make a pdf with transparrent background in Illustrator CS6.
Can I export layers of image out to become .gif or something? coz i found a template for macromedia dreamweaver but i don't have that... i have to split up all the image into peaces and put them together in my web editor...
View 9 Replies View RelatedIs there a way to prevent edits to transparent layers? I have a very frequent problem where I change visibility on a layer but neglect to change the active layer and end up making unwanted edits that I can't even see the results of. Sometimes this means I don't manage to undo these changes while I still can!
There is never a case where I want to make changes to a layer I can't see (making changes without knowing what they are is the opposite of useful). Is there an option somewhere to prevent this?
Also, is there a way to set visibility and set the active layer in a single click or keystroke? Part of the problem is having to always remember to do two things.
Is there an option to set no active layer I make the active layer invisible?
i'm trying to export a .png image with a transparent background...
View 3 Replies View Related I want to point out I am currently exporting my image by going to File>Export>.PNG>(72PPI+Transparent).The issue im running into is; for example when I am exporting text, I am also exporting a certain amount of area around my image. How can I export the exact outline of my image?
When I wanted to use my text image for a website I was building I noticed I couldn't get the image to center. I opened the image in paint and noticed I was exporting the area around my image as well and not just the image itself.
Â
I would like to export the text outline only. As you can see in paint I am exporting a fixed area around my image.
I have image.psd file with base1, base2, base3, base4, base5 layers and
variation1, variation2,, variation80 layers.
I need to export images and save them as
imagebase1variation1.jpg, , imagebase1variation80.jpg
and the same for each base layer + each variation layer. What is the most efficient way to do that in Photoshop CS5? (And I need to repeat this task for the rest of my 200 .psd images!)