I made a 50 page book in photoshop cs2, dont ask why I made it in there but I did it all. I'm having it printed from files on a disc, the printer requested that I put each file in a .psd format (not a problem) and a .pdf format as well (again not a problem) but he also asked that I embed the fonts I used into the .psd file so that he prints exactly what I created with the same fonts and all. Im not sure how to do this?
View 2 RepliesI was wanting to create an image of text embedded in a metal block. Is there any way to use the 3D tools in Photoshop CS6 to create this kind of effect ? I've only been able to extrude text 'up' ( if you know what I mean ! ) rather than down into a negative space.
View 2 Replies View RelatedIs there a way to embed font files into a PSD so that if you take it to another computer that doesn't have them, it won't have to choose a substitute?
View 1 Replies View RelatedI have a tight head shot of a guy and I need to embed a steel zipper onto his face so that it looks like his mouth has been sealed shut by the zipper. This needs to look as realistic as possible.
I have shot both and am about to morph them together. I do not have issues with close cutting the zipper it is more about how to "embed" it so that it looks realistic.
Is it possible to embed a sound in a photo which will play when I email the photo?
View 2 Replies View RelatedI have a website I am building- website funny .I have elements Organizer set up with multiple albums that I can sync up to Photoshop.com. I would then like to have a link on my website that launches an embedded copy of my gallery into the website so it appears that it is all part of the same site.
Does this capability currently exist? Would I have to sync it up with another site (PhotoBucket or other) to make this happen? I don't want ot maintain the files in multiple locations and Elements Organizer does not have direct FTP capability (if it does I haven't found it). So I am looking for a one-stop solution if possible.
I design wedding albums for a photography studio, and I'm currently trying to order an album from Asuka books (in case anyone might be familiar with them). In order to do this, I have to take the folder containing all my files (jpgs) and run it through their "file checker", to make sure all the files are in the correct format. Anyway, everytime I do this, I get a message saying "some color profiles are not embedded". I don't really know much about color profiles, except that the template I'm using from the company is "Adobe RGB (1998)", so I set my workspace color profile to the same. The people at Asuka have not been able to help me, and I'm way behind deadline and about to lose it! Bottom line...Does anyone know how to tell which files have embedded color profiles and which do not?
View 2 Replies View RelatedThis is a question regarding Elelments 11 and embedding ICC profiles. I have succesfully set up a colour balanced system for printing on my own premises. At the time of printing I select the relevant ICC profile for the printer/ink combo I am using. However I need to send files way for larger sizes and want to ensure colour correct prints that match as closely as possible the prints I produce in my own studio.
How do I embed the third parties provided ICC profile in the file before sending to them?
Have just put the finishing touches on a book cover and now need to embed the fonts plus the following. Can I use GIMP to do this?
Fonts and images are embedded.
Bookmarks, annotations, and comments are disabled.
Document security (any type) is not used.
PDF/X format is used. PDF/X is preferred, but if you are submitting non-PDF/X files (for example, PDF/A), any comments, forms, or other non-printing objects could be removed during our review process.
Transparent objects are flattened.
Spreads and printer's marks are disabled.
Downsampling, or decreasing resolution, of images is disabled.
Bleeds are enabled (if applicable).
We have an Inventor Drawing Border Template which is 381KB in size. We have a drawing checklist in PDF format which is 182KB in size
We thought to insert this into the IDW file so it would appear in the browser bar as embedded under the 3rd party section this actually works a treat....BUT The total file size of the template is then 2049KB which is too large. Why is it when inserting a 182KB File into a 381KB file it creates a combined file size of nearly 4 times the size of the 2 files?
It seemed difficult to have files this large repeated over and over again.
We have Inventor DWG templates that I have created based on our AutoCAD DWG templates. We chose the INV DWG route to simplify template creation. However, our logo has a gradient hatch with the 'O', something which Inventor cannot handle.So we now modify the logo only, changing the 'O' to an embedded bitmap image. The same goes for the ISO logo.
After doing this, I noticed the drawings were increasing in size, at a much higher rate than detail I was addding to the drawings. If I go to Tools > Links, i see that the bitmaps are being replicated, over and over (seems like after every save, or every time the drawing is opened). The count can hit around 45 embeddings!
The problem is that the logo randomly drops off (on screen and after printing) due to there being too many embeddings, and I cannot save the Inventor DWG to an AutoCAD DWG any longer (clients request editable DWGs).
Question : How do I stop the embedding replications?
Drawing with all views deleted. Notice file size of 8mb. Normal size around 1.4mb from template file.
We have Inventor DWG templates that I have created based on our AutoCAD DWG templates. We chose the INV DWG route to simplify template creation. However, our logo has a gradient hatch with the 'O', something which Inventor cannot handle.
So we now modify the logo only, changing the 'O' to an embedded bitmap image. The same goes for the ISO logo.
After doing this, I noticed the drawings were increasing in size, at a much higher rate than detail I was addding to the drawings. If I go to Tools > Links, i see that the bitmaps are being replicated, over and over (seems like after every save, or every time the drawing is opened). The count can hit around 45 embeddings!
The problem is that the logo randomly drops off (on screen and after printing) due to there being too many embeddings, and I cannot save the Inventor DWG to an AutoCAD DWG any longer (clients request editable DWGs).
Question : How do I stop the embedding replications? Or at least purge them out...
Attached : Drawing with all views deleted. Notice file size of 8mb. Normal size around 1.4mb from template file.
DWG Link : [URL]....
I have created a package of logos in different versions. 30 versions in all. However each logo weights around 1.2 mb. It contains nothing but a few vectors and colors, no blends no images.
If I save as unchecking "Embed ICC profile" the weights falls to around 188 k
unchecking the ICC profile?
I am trying to find out how to embed a mixed ink image into Illustrator (multiple spot colors) and not get single images once it's placed. So far I've only been able to do it with DCS 2.0 files which can only be linked, not embedded. I have been successful with saving PSD files and deleting all of the layer artwork, just keeping the channels, however when I embed that file it converts it into single images of each spot channel and not a mixed ink image. Basically what I'm looking for is when you look up at the top left bar when you have the image selected it should say embedded: mix ink image PPI: 300 or something like that. Instead I've only been able to get single image to show up. What format is required to get that?
View 6 Replies View RelatedI want to export some files for printing by a service bureau using a custom profile which is 1.87 MB and do no not want to embed the profile. The images will then be sent directly to the printer without any adjustments and the profile is not needed. This is an option in Photoshop, but I have not found a way to do this in Lightroom.
View 10 Replies View RelatedBelow is a link to a github repo that has a code example showing how to embed an IronPython engine inside a C# addin. It is the same as the "Simple AddIn" that comes with the SDK, only with the logic part of the addin factored out into IronPython. I could never find anything on using IronPython with Inventor so I'm posting this for any others that might be interested.
The main reason for doing this is to speed up development time. Edits related to the python code do not require the cycle of shutting down Inventor, compiling, restarting etc. More detail is in the readme. URL....
We have recently started having issues with our sets coming back from the printers. We are using ACA 2013. We us the "Arial" font for all of our noting.
When we need a check set printed we typically send a PDF of the set to our printer for reproduction. Lately I have been using the "export > to pdf" function under the drop down. The problem is, when we view the PDF in our office, it is perfect but when we ship it off to the printer he see's missing letters and open boxes in some areas instead of letters.
I am assuming that this is because the font is being substituted with something else. When I recreate the PDF using the plot command and use the Adobe PDF printer I can uncheck the "Rely on system fonts only, do not use document fonts". This seems to remedy the problem and the printer is able to print and view the PDF just fine.
So, is it possible to set the default settings of whatever the "export to pdf" uses to convert the dwg into a pdf so that is will embed the fonts. There is not an option for that under the Export to DWF/PDF options.
If I export text to PDF my font become BOLD and does not look like in Xara. I used Arial font. Is it possible to prevent Xara from embedding font when exporting to PDF? I deselected that option in export settings, however, it still does it.
(it does not do that only if I select first option when exporting to PDF called Draft Quality, however, in this mode pictures are in low resolution)
My problem might be a little more complicated than most problems considered 'beginner', but for all I know about GIMP (which is very little), it could be very simple.
I wish to superimpose text on an image so that the text's color us what color it was superimposed upon. To better explain what I want, take this rainbow image:
[URL]
Say somebody type a large lowercase g near the top left corner of the image. The top circle of the g would be red whereas the bottom circle (or hook depending on the font) would be purple since it dips that far down.
After I finish typing the text, I could save that layer, or cut/copy that text as a new image and save it then.
I have trouble of embedding invetor view in excel 2007 with inventor 2011 installed and window 7 64bit.
I follow same steps in help file. when I try to register ocx file, it came out error "the call to dllregisterserver failed with error
code 0x80040200."
I try to change UAC and i am an admin too. it doesnt work. when I insert object in excel, the error is "cannot insert object"
Autodesk Inventor Professional 2014
Autodesk Product Design Suite Standard 2013
Microsoft Office 2007 & 2013
Windows 7 64bit
Synergis Adept 2013
Visual Studio Express 2010
Is there some sort of "Auto Embed" feature that will embed your linked images?
I have a document that is embedding most of the linked images. It's not happening in all my documents, just one
when I try to embed images (that are already placed), the "save as" window automatically pops up. is this some new feature, or do I have a glitch?
View 2 Replies View RelatedHow to save an .eps file from Illustrator without embedding the text? I don't mean the fonts, but the actual text. I've created a logo that has text in it, and I want to save a copy as a vector-graphic, without any selectable, searchable text baked into it. I know that I can convert the text to outlines, but I want to actually keep the .ai file to work on, and keep the text in that file to edit.
The only solution I can think of is to duplicate my text layers and convert them to outlines, but that's incredibly convoluted.
I have been trying all week to find out if there is a way to embed editing information into a file upon exporting it from LR. Can you use metadata? What I mean, is, years down the road, I want to remember how I edited a particular photo... Is there anyway for me to do that so it's in the photo's properties?
View 8 Replies View RelatedI created a simple animation and published it via the "Web" target.Then, with a bit of hacking, I was able to successfully embed this animation into our corporate content management system which runs on CoreMedia.
Works fine in FireFox and Chrome -- but the default company web browser is -- yikes! -- Internet Explorer 8 (yes, as in eight, you got that right).
As you might expect: the animation doesn't load at all in IE8.
Even worse: our CoreMedia system sets in every web page it produces this meta tag in the header:
<meta http-equiv="X-UA-Compatible" content="IE=EmulateIE7"/>
So, the fact that Edge Animate's exported .html file contains
<meta http-equiv="X-UA-Compatible" content="IE=Edge"/>
is totally useless for me.
Under these circumstances: is there any way to make the animation run inside of IE8? Remember: the CoreMedia produced web page that contains it runs in an intranet environment and many employees don't have internet access. Furthermore almost all employees don't have admin rights on their computers so installing some software is a no go (would be necessary for some 20.000 computers, so no solution form that perspective, either).
This is a subject that I have now talked to 3 people at a print lab and 5 local Pro Computer photography about and cannot figure out.
My images are all sRGB color format automatically by my camera.
Somehow my images are coming into PX5 with the sRGB, but the second I do anything to them even just going to save as and renaming them.... then they no longer have a color profile attached.
I have checked this every which way. I make sure the options box under save as has the box checked for "embed ICC profile". They still go out and then have absolutely NO color profile attached.
This was brought to my attention by an outside lab telling me that my photos were printing wrong because of no color profile being on them.
I tried going through After Shot Pro and can view them with any ICC profile including one from this specific lab, but then even on that program if I try to attach a color profile to my photos that have already gone through PX5..... then after shot can't embed a profile, the box is checked but nothing happens.
I have worked on this non stop for a week now and can't figure it out.... the box to embed the profile is always on and not one of my photos has any type of color profile on it after it has been in PX5.
Oh and it's the Ultimate PX5 and all patches etc have been uploaded. I even uninstalled and re-installed once to try and fix.
How do you embed (not link) an excel spread sheet into my sheet metal template.
The excel file is simple, 2 rows listing the A1=gauge and B1= decimal equivalent.
What I want to do with this is to get the gauge to show up in the iProperties description along with length and width of part. The thing is I need column A to show up in the iProperties (12GA) but column B to be used for the sheet metal default thickness.
I keep getting this error when I run my code.
Error in rule: Gauge, in document: Part1
GoExcel: 3rd Party worksheet not found: "3rd Party:Embedding 1", Sheet: "Sheet1"
Code so far..
i = GoExcel.FindRow("3rd Party:Embedding 1", "Sheet1", "Gauge", "<=", iProperties.Value("Custom", "Gauge"))MultiValue.List("Thickness") = GoExcel.CellValues("3rd Party:Embedding 1", "Sheet1", "B2", "B35")
What I am trying to accomplish is to make a 10-sec video that has a real time countdown clock to a certain part of the day (Ie: 5 hours and 10 secs left till 8 pm). Designing the clock is simple, what I cannot figure out is what program i should use and how to make it link to real time. Is this possible in after efects or do i need to use flash professional or something else. To give you a little bit more information, typically I design ads that just run on a loop, this ad has to be different because it needs to run in a loop and somehow go and get the countdown according to real time and not just the videos length. (I've heard of somehow making a flash SWF file that either links to computer or RSS file, but how to do that in aftereffects.) This is what i can find, but NOT what i want: [URL].... I want it to use real time for countdown.
The media player running this 10-sec video ad is apparently compatible with Flash SWF.
I've created a simple graph of an area painted with some transparency in Origin Pro 9.1(such as this: URL..... and copied and pasted it on a blank CorelDraw X6 file. The area in the embedded image looks checker board pattern, not transparent as in the original image.
The problem appears to be within CorelDraw, as the embedded link to Origin software works fine, and an embedded image of the same graph in Microsoft PowerPoint looks just fine.I've tired combinations of earlier Origin versions (9.0, 8.5) , CorelDrawX3, XP and Windows7(32bit, 64bit). All failed.
I got over 160 color corrected RAW files from my photographer when I thought I was getting TIf or PSD files. I need to put them into an in design doc to send out for printing. Is there a way to convert all of these in one fell swoop without messing up the work that has already been done?
I didn't allow in my timing to save each one individually since i didn't know I was going to need to do this. I am really unfamiliar with batch processing, so how to best go about this, or if I even can. I am working in Photoshop CS6. version 13.06 x 64.
I am using Photoshop Elements 10 Version 10 (20110831.m.17215) and everytime I plug in a memory card to upload images it wants to upload every image on the card, even though it has previously uploaded images from that card, even though I have the "Copy New Files Only (Ignore Already Imported Files)" box ticked in the preferences Camera or Card Reader section. This gets very frustrating and time consuming when I have to go through the images every single time to uncheck the images that have already been uploaded.
View 3 Replies View Related