Photoshop Elements :: Striping In Photo Prints
Dec 18, 2013
I have Adobe Photoshop Elements 7. My PC runs Windows 7 Professional (64 bit). For years, I have produced high quality prints with my Epson Stylus Photo R280 printer. Not so recently.
The printer began depositing a colored stripe at the top and bottom of my photos (portrait orientation). And, horizontal streaking began appearing evenly spaced from top to bottom.
I called Epson tech support. The techie put me through many troubleshooting steps. The nozzle check pattern was fine, so she had me print using Photoshop Elements 7 and using Windows Picture Viewer. Both prints had the same issues - horizontal striping from top to bottom and wider stripes at the top of the page and bottom. She concluded that the problem is Elements!
how Elements 7 could be the culprit and what I can do to fix it. I love the printer and Elements but I cannot continue throwing money at paper and ink to test the printer.
View 6 Replies
ADVERTISEMENT
Apr 16, 2013
I am printing from Elements 8 using an HP6500 printer and the lead edge prints right to the edge of the photo paper (4x6 or 5x7). This did not use to happen. I have looked for a place where the settings are causing this but cannot find it. The top and bottom margins look OK.
View 2 Replies
View Related
May 28, 2013
I'm using phoroshop cs6, windows 7 and an Epson 3880. When I go to print, the print preview looks good, the paper size is correct but only the lower 1/2 -2/3 of the photo prints.
View 1 Replies
View Related
Mar 2, 2011
I have been trying to figure out the best way to replicate lane striping in 3ds Max. I am using survey data, so I would like the striping to match exactly.
Can this be done using viewport canvas? I've tried some tests, but the texture seems to "shift", and is also lower in quality/resolution than I care for.
I am looking to use this on stretches of roadway that are between 500ft-1500ft in length...
View 3 Replies
View Related
Sep 3, 2005
I have a Monaco EZ color Optix color calibration system. The unit has a sensor that is used to calibrate your monitor and comes with a 4x6 color print that (with the help of the users scanner) can be used to calibrate your inkjet printer.
I've used this system for a year and it works quite well. Lately, I've been using Sams club photo center for my prints. The prints are a close match to my screen, but not perfect.
To get perfect prints, I have done the following (kluge) which works, but is very time consuming. I'm looking for the correct way to "Calibrate the Sams club photo printer".
I pretend Sams club photo center is a printer. I had them make a 8x10 photo of the Monaco printer calibration file. I then followed the printer calibration proceedure as if the Sams club photo center were my printer. This results in an ICC profile for the Sams club photo center.
Now in Photoshop, I print my images using this ICC profile to the "Adobe distiller printer" that I have, which makes a .pdf file, with the corrected print in it. I then "extract" a .jpg or .tif file from the .pdf file, and send the resulting file to Sams for printing.
As I said above, this works but is very combersum. Is there a way to do this directly in Photoshop. All I am doing is applying an ICC profile to the RGB of an existing file to create a new file.
View 4 Replies
View Related
May 18, 2009
I have recently upgraded my system to Vista 64 and PS CS4 from Windows XP and PS CS3. Now when I print my photos have a severe green cast. I have tried turning off CM at the printer, in PS, both and on in each place and both, nothing seems to work. I have DL'd the paper profiles as well, still doesn't work.
View 3 Replies
View Related
Aug 5, 2012
Have been using Ele 6 for some time and everthing prints out fine (Epson PX720wd). After changing to Ele 9 all prints are too dark.
View 1 Replies
View Related
Sep 14, 2012
I used to get borderless prints in elements 3 but I can't in elements 10. I have the same printer and computer. Why?
View 2 Replies
View Related
Sep 2, 2012
My photos are printing out much darker than what is on the monitor display. I have calibrated the monitor and changed the color profile, color management & color space numerous times and they I cannot see any difference in the prints. I've changed the printer settings, still too dark. I have edited the photos and brightened them, still much darker than on the display. I'm using Photoshop Elements 10 with a new monitor and computer. My old computer and Adobe Photoshop CS2 program did not have this problem.
View 5 Replies
View Related
May 3, 2013
PE11 crops as it prints pictures. Why? I use 4x6 paper to print. When PE11 shows the thumbnail on the preview screen prior to printing the whhole picture is there. But the output shows cropping which spoils the composition of the picture I took. I tried fooling the system by saying that Iwas using 3x5 paper and the whole picture was there but of course there was lots of white space around it. What can I do to get ariound this problem using 4x6 pper?
View 4 Replies
View Related
Sep 25, 2013
I've been having trouble printing color prints with PSE 9. They appear kind of pale or less vivid (unacceptably so), the colors are just not as they appear on my monitor. I'm using an Epson R2880, iMac 10.6.8. It prints b&w beautifully. I've been through Epson tech support, checked nozzles and cleaned heads. While speaking with Espon they suggested I print from another application, so I tried using iPhoto, colors came out accurately there. I happen to still have PSE 8 still on my computer, so I attempted to print from there, the colors were also more accurate there (and that's without using the ICC profiles I have in PSE 9 ). It seems the issue is unique to PSE 9. I've tried changing my color setting, typically I have it set to AdobeRGB, but have tried "no color management". I have my monitor calibrated, use proper ICC profiles for any papers I use (and have tried multiple papers).
View 1 Replies
View Related
Sep 11, 2013
I have PSE 10. It's been on my computer for ages but I'm just now trying to play around with it. When I tried to order prints through Costco I got an error 6. I would try to un-install and re-install since it's been so long .
View 4 Replies
View Related
Mar 23, 2013
How do i get the white border off of my picture when i print my picture?
View 2 Replies
View Related
Oct 27, 2012
How can I create locket size prints?
View 1 Replies
View Related
Nov 20, 2013
When trying to place an image into a new document in photoshop elements 12, I select all-copy-paste the image (or even drag it) over to the new doc created. However, when I do this - the image does not paste in at the same size. It typically shrinks down in size. Do I have to save the file, close out and then open the new doc and PLACE it in the document in order for it to keep size? There must be a better way to do this. Basically, how can I drag a photo that is 4x6 over to a new doc while keeping the size at 4x6.
View 5 Replies
View Related
Aug 18, 2013
On Adobe Elements 11 can you rotate an insert to a photo without rotatine entire photo?
View 2 Replies
View Related
Feb 11, 2014
How can I remove a white film on my photos after scanning the photos?
View 1 Replies
View Related
Aug 11, 2013
How do I make a photo sepia and leave an item in the photo the original color?
View 1 Replies
View Related
Sep 4, 2013
Why does my cropped photo look like a broken page inside a version set with the original photo?
View 1 Replies
View Related
Dec 8, 2012
in elements 11 how can I extract a person from one photo and insert that person into another photo? I'm totally new to this and my software booklet doesn't say and I'm lost.
View 2 Replies
View Related
Dec 6, 2013
how do i add a person from 1 photo to a group of people in another photo (using elements 9)
View 1 Replies
View Related
Jan 14, 2014
I did use the scissors and eraser tool to cutout unwanted background, and now I have an image I want to save and copy to another photo. The problem is that Elements 11 won't let me open up another photo at the same time, or let me copy the selected image to clipboard to paste on a different photo.
View 1 Replies
View Related
Dec 10, 2012
I have PSE 11 and I am creating a Christmas theme with various pictures. I have my main photo with 6 layers including a tree and figures which I can move independantly and the background is the checkerboard as the main layers are turned off with only my selections showing. I also have another photo where I have selected part of it and also turned off the main layers leaving a small part with checkered background. When I have the main photo loaded and drag the other one from the photo bin with the move tool, nothing appears on the main picture. I have already dragged the Christmas tree in the same way and that worked. By the way, all the files are .PSD.
View 6 Replies
View Related
Apr 28, 2013
tried several times to shift an object from Photo 1 to photo 2:
identified the object in photo 1, e.g by using the lasso
stored it by edit/copy (or strg/c)
opened photo 2
edit/insert (or strg/v)
object appears in photo 2, but without the frame it was supposed to come with - and by which I could enlarge / minimize / shift it....
made a mistake or software error?
View 2 Replies
View Related
Dec 10, 2012
I have Photoshop Elements 10 which I work with sparingly. I would like to outline a section of the photo (a face) and somehow select it to be the whole photo - in other words to get rid of all background elements. I can outline the area with lasso, but do not know how to just save that area. When I save, the whole original photo is saved. I also tried the magic extractor, which really worked to make just the face and crop everthing else out, but it has a white background the same size as the original photo, which means it is essentially a reactangle with a face in it. I am trying to just get the face so I can paste it into a document, sort of like when people put heads on fake bodies. This is for a church newsletter. I have done this with my old Picture It software, but that was on my old computer. I think I should be able to do this with all the gadgets Photo Shop has, but I must be missing something.
View 2 Replies
View Related
Mar 10, 2014
In Elements is it possible to copy a selection from one photo into a different photo, i.e copy and paste
View 5 Replies
View Related
Nov 19, 2012
how do i replace a face on one photo to another photo
View 4 Replies
View Related
Sep 11, 2013
How can I blend a photo into another photo. In other words, when I load a picture into elements 9, and I load another picture on top of that one, How do I fade it in where it is seen but but is faded in?
View 1 Replies
View Related
Dec 4, 2012
How to superimpose a photo on another photo?
View 2 Replies
View Related
Mar 12, 2013
How can I use the photo collage backgrounds and themes available in Elements 8 but not in Elements 11?
View 3 Replies
View Related
Oct 5, 2013
How do I copy one part of a photo and paste in another part of the same photo. element 12
View 2 Replies
View Related
