Photoshop Elements :: Sharpening With High Pass Filter?
Jan 28, 2014
I am using PS6 and Elements 11.
1. I import the image from LR
2. I duplicate the layer
3. I go to Filter....High Pass
4. I adjust the gray image to the amount I want to sharpen
5. I then go to hard light in the blend modes to change the gray to the image and nothing happens
6. The image stays gray and will not change..
7. None of the blend modes change the gray image.
8. ?
9. This happens in both programs.
View 13 Replies
ADVERTISEMENT
Apr 5, 2013
i have a good grasp of the arcane nuances of unsharp mask, but nothing on high pass filter, So when we select that tool, and what parameters to consider to what end.
View 4 Replies
View Related
Mar 19, 2006
I fixed the picture and I'll use the pass high but which number will I use on pass high?
View 2 Replies
View Related
Jul 27, 2013
Does this slider work like the radius slider in high-pass filter in PS?
View 9 Replies
View Related
Feb 3, 2006
I've almost finished the picture but I'll use either unsharpen or high pass. Which do I chose? or you use the another tool from the filter?
View 1 Replies
View Related
Mar 1, 2013
Does the "high pass sharpening" subdue color saturation of the images? I was creating a photo collage type of art in InDesign. I also used Photoshop to sharpen and resize each individual images.
I used High Pass sharpening with Edge Masks. After readjusting the images in photoshop I saved them with new names and relinked the new file to the InDesign. When I relinked the new image, there was a noticeable degradation of color saturation. The images looked sharper but a lot more grayer or muddish. In photoshop, I didn't change the color space.
So I wondered if the High Pass filter alters the color saturation. Here is the link to my photoshop actions that I used to create the sharpening effect. what caused the color shift in my file
View 11 Replies
View Related
Jul 26, 2011
ive looked for a plugin or tutorial but coildn't find any. ok visit this link [URL] and look at steps 14-16.
View 4 Replies
View Related
Jun 9, 2012
I have CS6 with the most recent updates and RAW 7.1.
First: When I crop an image (I am using the new crop tool), and I make sure I have cropped it (hit enter after adjusting the box), if I then try to use the Lens Correction filter, it will not load the cropped version of the image but only the uncropped version. (CS5 did NOT do this). This makes using the Vignetting tool impossible to use, since when the image gets sent back to the main PS window, it shows up as cropped again, and the area corrected is out of range! The only way I can now use the tool is to save the cropped image to a new file and then open it up in a new PS window and THEN edit it with the lens correction filter.
Second: When I was trying to open and process some RAW files today, whenever I used the sharpening tool, it would preview just fine on the RAW window, but when I opened the file after finishing my adjustments, all of the adjustments would still be there EXCEPT the sharpening and NR ones. It did not matter if I saved the image to different file types, or opened it directly; the adjustments made with that set of tools were lost outside of the RAW window. This is definitely not the way CS5 worked.....and it seems like a bug.
Third: I know this is not a bug, how to change what the files do, since I can't find where to set this. When I open a JPG file, if I do any work to it at all, it then automatically gets saved as a PSD file unless I select JPG from the pulldown menu. How in the world can I get this pulldown to NOT automatically go to PSD when I am working with JPGs? It is an extra step that just gets in my way.
I have a Window Vista64 Intel Core2Quad CPU Q7600 processor machine with 6GB RAM and a Nvidia GeForce GT 430, with the latest updates.
View 9 Replies
View Related
Jan 16, 2008
In older versions of Photoshop there was a very beautiful filter - low pass.
It could make blurry effect to picture. I liked so much to use it on my nature photos.
It was situated in Filters --> Sharpen (if i don`t mistake)
Where is it now? Why it`s not present in new versions of Photoshop (CS and CS2 don`t have it)?
View 6 Replies
View Related
Jun 8, 2013
I am trying to import photos from my computer to Photoshop elements 11. It has imported most but wont import some as "file quality is too high". How do I get around this? Do I have to downgrade the quality of my photos? To do editing wouldn't you want the best quality photos to start off with?
View 6 Replies
View Related
Jul 8, 2013
I have used PSE 5 happily and greatly liked the auto sharpen feature. I have been forced to upgrade to PSE 11 due to Windows 8 incompatibility with 5.
I am appalled to find that the sharpen feature, including auto, does not work in Quick or Guided modes. The small previews in Quick mode show the correct sharpening effect but clicking on them or using the slider does not transfer to the main image. I either have to go into full unsharp mask, which I hate for quick fixes, or use the 'adjust sharpness' option under 'filter' in Quick or Guided Mode, which increases sharpness by an unspecified amount on each click.
View 2 Replies
View Related
Mar 24, 2005
I just bought an LG DVD burner and everything appears to be working well. I can burn a data DVD with Nero and do about 4 gb in 6 minutes. So, I know it's working okay.
When I try to burn a 53 minute DVD with Adobe Premiere Elements (home videos), I encounter problems. Basically, when its encoding the data (the first step) it says the time remaining is around 4-5 hours. Does this seem right?
Also, the CPU% goes really high. I tried burning it last night before I went to bed and when I woke up I had a virtual memory error. It looked like about 75% along the way it stopped with the error.
Now, I've been searching around reading about VM, etc. and I've tried a few things:
* expanding my VM
* closing down programs in the background both manually and with msconfig (all non-windows programs) then retried it
* defragged HD
* my hard disk has 10 gb remaining so that shouldn't be an issue.
View 1 Replies
View Related
Nov 27, 2013
In order to edit high resolution photos in Elements taken with a 36 megapixel camera (75 mb/photo), how much RAM does my computer need?
View 1 Replies
View Related
Mar 1, 2013
My photo is great when I open or view it in any other application. Why does it look low quality in pse 11? Also when I make edits and save them as jpegs, they look great again outside of pse11.
View 3 Replies
View Related
Feb 28, 2014
I want to export my created Slide Shows made in Photoshop 7 to My Vidieos File on my computer c drive, but it seems that the only option I have is to send it as a WMV Movie file. However, this way loses to much resolution and as I want it transported at high quality, is there any way I can send it that way, say, as a mpeg formatt?
View 1 Replies
View Related
Mar 11, 2014
How do I change a photo to high resolution for printing it on a metal sign?
View 4 Replies
View Related
Nov 13, 2013
I have recently purchased a Dell XPS15 laptop with a QHD+ (3200x1800) display. The PC is running Windows 8.1. I have also purchased Photoshop Elements 12 to run on it.
With the display at the native resolution, it is necessary to have the "Change the size of all items" option in the display settings of Windows 8.1 set to "Larger", in order for the native Windows fonts and UI elements to be at a reasonable size. The laptop came with this option enabled by default.
However, disappointingly the UI font size in Photoshop Elements is way too small when the display is at the native resolution. The application is basically unusable.
I have tried setting the "Use system font" option in the General preferences, but this doesn't seem to work.
The only way I can get the Photoshop Elements UI font to a reasonable size, is by dropping the screen resolution (to say 1920x1080).
This seems like a terrible waste of a beautiful screen, particularly when my main reason for using the PC is for editing photos, and my photo management and editing software is preventing me exploiting the full resolution of the display.
View 12 Replies
View Related
Jul 16, 2013
In Elements 11 on a Windows 8 64 bit machine. I can upload photos to Facebook using the standard quality without any problems.
However if I select the High quality option, the upload appears to work, I get the progress bar, and the done message, and if I select a new album the album is created on Facebook, but the album is empty and the photos do not appear anywhere in etiher the newly created album, or an existing album if that has been selected.
The orignal files are JPGs around 7.5MB in size.
View 1 Replies
View Related
Nov 15, 2012
How do I show high level walkways and balconies (in dashed outline) on the ground floor plan in a high volume space?
Obviously I can turn the first floor RCP on in the view and manually draw the information, but I assume these lines won't move if the walkways above move (or am I wrong?). Also this seems slightly wrong given the amount of automation available.
View 4 Replies
View Related
Aug 3, 2013
I have an image (1200mm x 1200mm) very sharp and crisp. (A photo that i have worked on and has lots of detail) I drag this image onto a canvas size of 150mm x150mm - and the image loses all of its sharpness. It is not apparent until i zoom in to see the detail. (PSE10) I'm sure that there is a box somewhere to tick..........but i cannot find it.
when i drag it over, it is still the large size, so i grab the grips/handles and shrink to fit, then it pixelates?
View 6 Replies
View Related
Dec 27, 2013
Where do I find lighting filter in PSE 12 for Mac ?
View 1 Replies
View Related
Apr 26, 2013
When I use the ratings filter with the CIB catalog of photos it works fine. But when I apply it to my own it doesn't. I follow the exact procedures but it doesn't seem to work the same way. After I have applied some star ratings to my photos, and I have all media displayed in the media browser, I go up to the filter by ratings stars and click on one of them (for example, I click on five stars). I would expect that the browser would eliminate all the images except those with a five star rating. This is how it works with the CIB images. But with mine, only some of the displayed images are eliminated, and the ones with five stars are scattered amongst the remaining images. For all of them that did not meet the criteria, there is a small circular badge with a slash line through it at the upper right of the thumbnail. I cannot get this function to perform correctly despite numerous attempts. The only thing I see as different from the CIB work is that I have stacked my photos into 5 stacks. But when I try using the ratings filter, I have expanded the stacks to show all 116 images.
View 2 Replies
View Related
Nov 28, 2006
I am pretty new to Photoshop but learning fast. This is my first post so if it should have been in Beginner's section please let me know. My question is, is there real value in the Sharpener Pro or Photokit Sharpener plugins over using the CS2 unsharp. I am currently converting RAW files to LAB and sharpening the image on the L channel then returning the image to sRGB.
View 1 Replies
View Related
Oct 24, 2006
I've got a few images that the depth-of-field was off & focused on the background not the subject. Now the subject is fairly blurred and I have used the sharpening tool and some other areas in the filter catogory & it still doesnt look good.
way to sharpen the subject up?
View 1 Replies
View Related
Dec 1, 2013
I'm an amateur artist who sometimes used, in Photoshop Elements 9, a filter in the "render" category that could change the lighting. It was terrific for creating things like candlelight, campfire glows, or (in this admittedly amateurish backdrop for my website) sunrises through objects. Now I have Photoshop Elements 12, and the feature has vanished! Is there a legal way to transfer it from 9 to 12, since it's all from the same company? Or would that violate the tampering ban even though it's from one Adobe product to another? If it's legal, where is the filter stored, and where do I move it to? URL...
View 6 Replies
View Related
Nov 18, 2012
In the course of migrating from Windows 7 to Windows 8, I ended up with a large number of duplicate pictures. Is there a way to filter duplicates to avoid going through the 9,000+ in my data base?
View 2 Replies
View Related
Apr 30, 2013
My last step in processing is sharpening. After the application the photo does not look like it was sharpened. If I use my zoom button up one level than the photo is sharp. When I run slideshow in Bridge this lack of sharpening also appears here.
View 4 Replies
View Related
Dec 6, 2013
I have low-light photo taken at 1600 iso and I'd like to de-noise it and sharpen it a bit with high pass. Will it matter which comes first?
View 5 Replies
View Related
May 30, 2009
I was using Focalblade with CS3 but apparently it does not run with CS4 64bit.
View 29 Replies
View Related
May 26, 2008
I use the lab colour system for sharpening my images, Ive done it loads of times with no probs. Tonight though; when I select lab colour from the menu my image goes black! I still get the four channels - Lab, Lightness, a and b but the lab channel is black instead of the usual full colour image, anyone had this happen to them? I've tried all the usual reboot and reset preferences things but no change.
View 9 Replies
View Related
Feb 24, 2008
I have this great photo of me and my boyfriend, I've already cropped and changed the color levels (its a bit washed out now, but it was WAY too dark and red earlier)
seanissocute.jpg - Image - Photobucket - Video and Image Hosting
the photo is a bit blurry, but the sharpen filters do NOTHING. And when I try to sharpen only certain sections it gets too grainy.
View 1 Replies
View Related
