I am trying to design a dvd sleeve using only photoshop. I have several photos on several layers that need to be sized the same and I have been using the info/navigator tool as a guide. I notice that after transforming the scale my photo loses sharpness and when I enlarge it is pixelated. I must be losing pixels/information when I transform the scale of the photos- the more I transform, the more I lose detail.
View 4 Replies
I am just starting out with the Photoshop CS5 trial. I am trying to apply a triangular pattern to a thin rectangular shape. I used the custom shape tool>triangle, then defined the pattern successfully.However, when I apply the pattern it partially repeats it along the vertical as well as the horizontal axis. Please see attached screenshot:
I only want it to repeat horizontally, what am I doing wrong?
Also, I am Fireworks CS5 user and am really missing the properties inspector panel which allows you to quickly and esily edit sizes of objects, is there a Photoshop equivalent of this?........at the moment the only way I can find to edit objects is through Edit>Free Transform.
I am currently in the following section Photoshopgurus Photoshop Tutorials - Classy Glass Buttons Tutorial (part 1/2)
trying to make CLASSY GLASS BUTTONS. I am stuck at STEP 7 because I can't find the menu/tool "Transform>Scale tool". I have PS 7.0 on my PC.
When "show transform controls" is checked and I have a layer selected, a white border shows at the edges of the layer with small boxes at the corners and midpoints. Hovering above one of these boxes changes the cursor into the "scale arrow." Traditionally, clicking the border with that arrow and holding down the mouse button allows you to scale down the layer by dragging the mouse.
In Photoshop CS5 (and perhaps other new versions), clicking the border and holding the mouse button has no effect. Dragging the mouse reverts the pointer into the "selection arrow" and drags the image across the screen instead of resizing it. This is because when you click on the border, it suddenly expands into a larger area. Only by clicking once and then letting go can you move your mouse cursor to the newly defined edge and then scale down the image. This is incredibly frustrating and adds a second, unneeded step in the process. Because I instinctively try to grab hold of the border as is, I usually wind up dragging the image by mistake.
I selected a layer in order to scale it. When I click the link between height and width and then change the percentage up or down the object I'm trying to scale simply disappears. I can see the edges and the transform tool 'handles' but the layer is not there. I've never had an issue in any other version of Photoshop. What the heck is going on?
Doesn't matter whether I use the percentage tool in the upper palette of Photoshop or just shift and drag to scale. The scaling object becomes invisible.
I've been experiencing this a lot more lately, and I've yet to find the one discerning aspect of my project that keeps the EDIT > TRANSFORM option from being usable.
Often I'll make a selection with the LASSO or SELECTION tool, it'll be on a layer where the selection encompasses an object (that is not vector), and it's not a selection of the entire canvas (like a CTRL + A). I'll goto EDIT and notice that TRANSFORM is greyed out. The image is in RGB mode, and I'll deselect, make the selection again and STILL not be able to select it.
Are there other things which can prevent that option from being enabled that I'm not thinking of? The layer is not locked and it isn't the background either.
Oh, also, without making a new thread, is it possible to move an anchor while you're drawing with the PEN tool? I thought you could hold SPACEBAR to move it before you released the mouse click, but I just end up having to use the SUBSELECT tool to move the anchors after it's drawn.
My digital camera has a tendency to distort as the image nears the outside of the frame. Is there a photoshop function that can correct this? I have tried the Transform functions (skew, distort, etc), and correcting half of the image is easy by dragging the corner grips away from the center to stretch the image, but, when I go to the opposite end of each given side, the distortion returns. The problem is the grip at the midpoint on each side moves with the rest of the side when using this feature. Is there a transform feature or other command that does something similar, but the midpoint grips stay stationary, basically taking the rectangular shape of the image and making it into an hourglass or four pointed star?
View 1 Replies View RelatedI don't have this! I've been following some tutorials and the one's that i like all have this step in them. Prob is that when i go to try it warp is not there. I'm not sure if maybe it's a plug in.
View 2 Replies View RelatedWhen i enlarge the size of an image (using free transform, or scale) in photoshop CS2, the resized image gets blurred (or smudged) as soon as i've accept the larger size. How can i prevent this from happening? I'm trying to work with few pixels, and when it smudges the edges i get tons of colors i don't want.
View 5 Replies View RelatedThe problem I am having is that every single file I open looks like this. Once I click transform (which I have to) the layer no longer allows me to click and edit the layer. I like to re-size my images in relation to the multiple images I place on a document. My previous version of photoshop did not create a transform box with each new file. How can I adjust photoshop so that it doesn't do this. I am using CS5 on a PC.
View 1 Replies View RelatedI would like to do an edit / free transform to resize a layer in my image. I want to do this WHILE LOOKING AT a round path that I have created.
No problem in photoshop 7 , just turn on the path, select the image layer that I want to resize, edit/free transform and I can shrink the image while looking at the circular path to see how the image fits within the path.
If one can select multiple layers to modify i.e. scale, rotate, transform... or is it only possible one layer at a time?
View 4 Replies View RelatedIs there a function, script or way to use the type-in transform tool in the unwrap edit window? I know there was a script (Unwrap Tools 1.6) a few years ago I used with 2009 but you had to overwrite max's default unwrap edit window, and I don't want to do that. I'm using 2012 design now
Here's a screenshot of "Unwrap Tools 1.6"
How do I "flatten" the Transform Effect in the Appearance panel so I can edit the copies as individual objects?
View 2 Replies View RelatedI'm missing transform handles and unable to edit objects or text boxes in Illustrator CC. How do I fix this?
View 2 Replies View RelatedI'm creating a flow chart/decision tree. I am animating the position of a diagram on the stage when a user selects yes or no in answer to a series of questions.
I've split up each diagram movement on the stage timeline as labels. I've staggered these transforms as keyframes on the same layer/track. The issue I'm having is when I manipulate the position of my diagram by moving it on the stage it affects adjacent transforms. I have my transforms seperated with a 1/10 second gap becuase I thought this would split the timeline up but it appears not!
While I can edit the transforms manually by typing in xy co-ordinates it would be ten times faster to move the diagram on the stage instead and not overwrite adjacent transforms.
How do I restrict the transform to the two keyframe points I am concerned with?
I need to know how to select an image from a PDF file in Photoshop, and also rescale it so that i can put it onto Adobe Premiere Pro CS4 for a video with 720x576 PAL settings (its for a DVD!). Also, i have to make sure the image is not pixelated on the video.
View 2 Replies View RelatedI am trying to create a new scale for a view port, but when I select custom, the Scale List Edit box is missing. I have created a custom scale before and never had this problem. Autocad acts as if the box is open because I cannot do anything with the drawing, I must hit Escape to get back to it .
View 3 Replies View RelatedI have AutoCAD 2011 now and I am not sure where the Dimention style edit (to show in all dimention lines I am using) is...what I have to do now is to change each line EVERY time I dimention any thing.
the other thing is how to scale the drawign in viewport. In older versions it shows easily. Where is it in this one!?
I would edit the default extrusion scale to 0.3 giving me this:
I am wondering on how to correct the pinched edge at the top of the model
I am having trouble trying to change the View Scale in the the layout tab. Someone before me changed it to be 1:0.808 and now when i print my drawings they are all smaller than what is shown on the screen. how do i go about changing this number so its 1:1?
View 9 Replies View RelatedPs CS6
OSX 10.6.8
Problem: Transform applied to Smart Object fails to transform an attached Smart Filters Mask.
I mean a Transform, including Free Transform, as found in the Edit menu. A simple move by the Move Tool is OK.
A workaround until this bug is squashed is to encapsulate the Smart Object + Smart Filters + Filter Mask inside another Smart Object and transform that.However, that will not be a satisfactory solution in some cases. If a filter has size parameter(s), e.g. Gaussian Blur radius, a scaling or warping/distorting transform applied after the filter will obviously differ from the filter applied after the transform.
In any case, the workaround is inconvenient to subsequent editing and experimenting with filters and masks.
I just started using 2012. Two problems:
1- Somehow, in my current drawing, everything is layer-locked. There are no Xrefs in this very basic drawing. All layers are unlocked. Yet, any attempt to select any entities results in "x objects were on a locked layer". Again, all layers are unlocked. No Xrefs. No blocks. Just simple lines. All entities appear faded. This happened after viewing a layout in both paper and model spaces. Reviewing the text window shows no strange accidental commands.
2- There is a default set of viewport scales in the status bar at the bottom right. Default scales are all metric. I would like both metric and imperial. I see you can edit which exact scales are in a metric list, and which are in an imperial list. But how do you set what is displayed/available in the status bar button?
I am trying to access the edit original (edit with) option to edit a photo that has not been edited yet. I right click and go through the edit menu and does not appear or is not available? Would I have to reopen it manual in photoshop or is there a way around this to access that setting? it sometimes does not appear on my already edited photos.
I would prefer not to open each photo again, as some files i do not have and were imported into the document with another computer.
is it possible to create a gradient brush with the colors fading from black to white, and then edit the colors so instead of black fading into white, it's now black fading into transparent?
(so the pixels that were pure yellow are now completely transparent, the pixels that were slightly darker yellow are now almost completely transparent, the pixels that were dark yellow are now barely transparent, and the black pixels remain completely black.)
(I was only able to do it now because I started off with that black/transparent image)
I want to do this so I can change the color of the yellow.. I could use replace color,
What I'm basically trying to do is be able to change stuff in images/screenshots, like add a pattern to a white shirt (so, get rid of all of the white), but completely preserve the darkness of its wrinkles/shadows etc. A friend told me I should just desaturate it, then make it like 50% transparent, then duplicate it so there's 2 of those layers.. and add the new pattern behind it. But it doesn't look that good..
I have just updated to Autocad 2013. While working on existing drawings (previously created in V2012), I am having issues with the SCALE command. Most times, but not always, when I add a line or block, with a base point on an existing line or object and try to scale it, I get an "extremely small scale factor ignored" message, although I did not get a chance to enter a scale factor. While it appears most times, but not always, if I draw a new line in empty space on that same drawing, I am able to use the SCALE command without problems. I also have the same issue when trying to scale an existing line or block, most times but not always.
Here is a copy of the command line while I am trying to make it work:
Command: l
LINE
Specify first point:
Specify next point or [Undo]: 100
Specify next point or [Undo]:
Command: sc
SCALE
Select objects: 1 found
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
Command:
SCALE
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
If you notice, it does not give me the chance to enter a scale factor. As soon as I pick the base point, it skips over to the error message, yet displays the scale factor prompt with a blank factor. I'm experiencing this issue on various files (not all but most), so I don't think it is a corrupt file. Why I get this and if I can correct it?
I have a floor plan with a very long footprint in a "View" drawn at a convenient scale.
The long building had to be broken to be put on several different "Sheets", and each of the floor plans on each of the sheet has a scale.
When I change the scale of the partial plan on one "Sheet", all the other sheets also change to the same scale and also the original view changes to the new scale.
Is there a way to assign the desired scale of the plan on one sheet without affecting the scale on the other sheets and on the original drawing view?
am in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
We have recently noticed that after printing a PDF of a drawing I plotted from AutoCAD we are coming up with differences when we double check the scale on the printed hardcopy using a carpenter ruler.
For example, there is a dimension labeled on the drawing of 200 ft. However, if I try to scale this out with a carpenter's ruler at the drawing was set to (say for instance it is 1 inch = 100 ft) I am coming up short of the 2 inches it should be (typically come up around an 1-15/16" or around 194 feet, approx 97% of the correct amount).
In the Page Setup Manager in AutoCAD, I have the following options selected (see the print screen as well):
Printer/plotter selected: DWG to PDF.pc3
Paper Size: ANSI full bleed B (11.00 x 17.00 Inches)
What to Plot: Layout
I don't have a plot scale scale other than the default 1" = 1'
No plot style selected
Then, on the print menu when I open the PDF that I have exported from AutoCAD, I have the following settings (see the print screens I have attached):
Printer: The printer I use (Konica Minolta c650 Series PCL)
And I have selected the Options "Auto Rotate and Center" and "Choose paper source by PDF page size**"
** Note, that I have tried unselecting the "Choose paper source by PDF page size" option and accordingly changed the paper size in the "Page Setup..." button at the btoom to match the document size (i.e. 11.0 x 17.0in) and it gets the difference to be closer (i.e. I now get 198 ft but some of my border gets cut off). See the print screen below for this a print screen of the print menu and sub-menu of Page Setup showing the paper size selected.
I saw that some people in other forums state that there is no real solution when trying to scale off of PDF's and that there should be a disclaimer saying as much if you are to send the file out to a customer who may rely on doing some in the field scaling from the printed copy of the PDF file. I find it hard to believe there is no solution as we have received some drawings from others whom the scaling works just fine.
When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
I am working on automating page setups in model space and am looking for a way to set the plot scale equal to the annotation scale for scaled drawings with
(setvar "filedia" 0)
(setq a (getstring (getvar "cannoscale")))
(command "-plot" "YES" "MODEL" "" "" "" "" "" "" !A "" "" "" "" "" "" "_Y" "_N")
Setting the plot scale with !A causes the lisp to fail. However, when running each prompt through the command line individually, !A works fine. what is missing?
