I recently switched from PS7 to CS and am having a problem. As far as I can recall, when I created a ellipse and filled it in PS7 it was crisp and sharp (like a vector).
However, if I do this in PS:CS when I deselect the shape, the edges of the circle are blatantly pixelated and rough. I am sure this is justa simple setting but I can't for the life of me find it.
The document type is RGB w 16-bit channels.
After changing my monitor i found that all shapes pixelated when rotated 45 degree
View 2 Replies View RelatedOur logo was originally drawn by hand, then scanned, and rendered in photoshop. That was a few years ago. I dont even know where the original drawing is anymore, so I have to work with the JPEG of the logo that I have.
Anyways, the logo is real basic. All of the edges look pixleated. Im assuming that when I originally scanned it, i must have had it on a really low DPI.
So I want to know how to smooth out the edges of my logo.
I'll attach the logo so you can see what I mean.
I have just installed Photoshop CS6 and notice every time i add a new layer there is pixelated lines and decayed shapes that show up. This makes it impossible to work. I have a Nvidia Quadro 6000 running in combination with a tesla c2075 there was not any problem i could see with other CS6 programs and it was working fine with CS5.
View 3 Replies View RelatedWhen I export pictures from LR for web the text sometimes come out as expected, but other times it comes out with hard jagged/pixelated edges. I have so far been unable to find a pattern to when this happens, but it has followed me since LR3 on a different PC.
Above shows an example. Proper watermark on top, pixelated on the bottom.
The watermark has been made using a TTF-font from LR. Current system is a fairly highspec PC, win8 and LR4.1 (64-bit).
I am trying to create shapes in photoshop but they all seem to have rough edges. Is there a way around this? 1. I have been using the "rectangular marquee tool" to draw a square. 2. Filling it in with a color 3. Then to Edit > Transform > Skew. Then I pull in show corners, push some out. Now the edges look horrible.
View 5 Replies View RelatedI have been using Paint.Net for a while now, but the one thing that I cannot seem to figure out how to do is give my squares and rectangles a rounded corners.
View 2 Replies View Relatedhow can i get rid of these unwanted white spaces between two shapes in illustrator.İ spend my whole week to fix this, i tried everything but didn't work. İt's not something about antialiasing, when i import these shapes to photoshop or another programs, i'ts looking worse.
View 3 Replies View RelatedI have Illustrator CS6 and I've noticed something odd. Whenever I create shapes they have jagged edges. I've attached a screenshot so you can see this. I'm wondering if it's a setting or something that I don't have turned on (or off).
View 11 Replies View RelatedI am working on a freelance logo and the client kept mentioning that my sample PDF's seem to have "smudge" on part of it, I never saw it and then I asked them to actually SEND me the file while I was not at my primary computer so I can look at it.
It seem that when you zoom in and out the shape changes and gets these random jagged edges. I don't see them on my computer or phone and my client only sees them on her desktops but it does also print out with these weird edges as well. I converted all type to lines and did an export to PDF to show her samples. The first image shows how it is supposed to look and how it did look when I first opened, the other 2 show what happens when it gets zoomed. And it changes too, it isn't the same jagged edges every-time.
I'm trying to generate random billowy shapes (like cartoon clouds or bushes) by simply creating a shape and applying a some kid of brush/pattern/style/script/whatever to it and getting a look like in the below links.
The look I'm trying to achieve is visually simple: [URL] ....
I can easily draw those kinds of things by hand, however I want to be able to generate such shapes randomly.
Is such a thing possible? Are there existing brushes/patterns/styles/scripts that can pull this off? So far my search has come up with nothing, unless I'm searching wrong.
Generally I'm aware of what brushes and patterns can do, but as far as I can tell they always generate the same results each time you use them.
Perhaps a script can be made to do this?
Essentially a cloud could be drawn as a bunch of random circles grouped together, then all of them get merged into one shape.
Im using Corel Photo-Paint X5 and was wondering how to decrease or remove pixelation from the edges of a low quality photo? Iva attached a sample below
View 5 Replies View RelatedBDSoft_Edge.gms
Attached is a free macro which allows the user to draw a vector shape and give it a feathered edge. The macro allows the user to adjust feathering and opacity and it came about as a result of the discussion in this thread:
A Suggestion for a "WOW" effect for the New Corel Draw X7
click on the small grey button at the right of the macro. how to use the macro. The macro currently only works on shapes with Uniform CMYK fills. I intend to bring out a revised version of the macro which can handle various fill types/colour models if I can pull it off.
Is there a way to extract the WHITE edges of this Editable Poly as Spline Shapes? Then I could use the Surface modifier to convert it to a Patch object.
I know there is a "Create Shape From Selection" button on in the Editable Poly dialog. But this gives me the ORANGE lines from the control cage, not the smooth lines on the subdivided object.
I would like to use a vector object made in AI as a custom shape to be used as a cookie cutter in elements.. I imported the AI file in photoshop but the "define custom shape" entry under "edit" was grayed out.
View 2 Replies View RelatedUsing Lasso i have created a good shape that i require in my work. so now i want to save that shape i have drawn to custom shapes so that i can use it later also in my future works.
View 4 Replies View RelatedI tried the following in Illustrator,
So basically, I created coloured text inside Adobe Illustrator and however much I zoom into the text, the text always appears to have smooth edges. Once I click on 'Save For Web', the edge all around the text becomes rough and aliased. I chose GIF and PNG, but it still happens. The text is on a transparency background. The same problem applies to images when I am creating a logo.
I drew something up on a sheet of paper, scanned it, then traced it's bitmap as line art. I then proceded to edit the vectors to recover all the detail I lost with the tracing. It took forever!
Now that I´m done, I realised there is a problem... how can I color in the drawing, if the lines themselves make up the shape? Essentially, I´m left with blank spaces in between all the lines instead of solid individual shapes that can be colored in.
What can I do? I´m so desperate I´m thinking of creating a gazillion individual shapes with the colors, and slapping them underneath the lines to "improv" a fill. But that will take waay too long, so is there an easier way?
If I could "invert" the shape I have now, so that the blank spaces become individual shapes, and the lines become blank spaces.
I thought this was going to be a piece of cake in the new Illustrator CC but I am having a few unanticipated issues:)I need to create some vector tire images with different edges, such as the top one in the image below.So I thought this would be SO easy by simply creating a pattern brush in Illustrator and then using that for the outside. So I created the shape you see in the middle image below and created a pattern brush with this shape.I then created an ellipse and used the new brush for the outline.
All of those are open paths...it has taken the shape and applied it to the outline but has kept each shape separate, so I am not able to fill the circle in black. I could of course go in and manually join each little corner separately where the little shapes meet but this will take FOREVER with all the images I have to do.
I'm trying to snap a head with it's neck with the merge edge tool, but somewhere along the way, the edges lost there border edge characteristics and now I can't merge the edges. Is there a way to make the edges back to the way they were?
View 1 Replies View Relatedis there any way to add shapes, in the "basic shapes" bar?
or maybe in any other locations.
I use a lot of predefines shapes, that are saved in various files. i wanna make a way to directly import these shapes, whithout open files and copy/paste the dsired shapes.
how to make achieve a pixelated, tiled, grid-ish look?
View 2 Replies View RelatedI've been using Photoshop CS5 for years now and never had any trouble with my lineart. I use an Intuos 4 tablet. This is what my lines used to look like last time I used Photoshop. Always on a 1 px round brush with the following settings:
Now, all of a sudden, my lineart looks pixelated. I am using the exact same settings and even tried updating my drivers, it has not been fixed. It's causing me insane amounts of stress since this is what I do for a living and the decrease in lineart quality is really taking a hit on my work.This is what they look like now..
I have a CS5 PhotoShop document, and it is 150px by 150px. The problem is that any text i put on it is slightly pixelated. I have tried anti-aliasing but its not working.I am planning to put the image on a website but the text on the image is clearly more pixelated than text on the page even when it is saved in the highest quality jpeg.
View 5 Replies View Relatedhow to achieve this effect?
I like the idea of the pixelation floating away from the object, Is there a name for this kind of effect? I assumed it was just some kind of pixelation reference.
I was experimenting with 3d model texturing in CS4. However whenever I zoom into the model I was trying to texture, it becomes very pixelated to the point of where I couldnt tell what it is supposed to look like. The only way I can tell what it is anymore is while using the camera rotate, the model once again comes back into focus with the sharp edges that I desire.
View 2 Replies View Relatedi was making a wallpaper for my desktop and i'm using this tribal looking brush, but it looks really pixelated...
Dimensions : 1600 x 1200
My screen resolution 1680 x 1050
heres what it looks like
as you can see the one in the top left corner looks fine, but the one in the bottom right corner looks all pixelated. Why?
If i use CS4 my brushes are all pixelated. not in CS3 though. and its on the brush tool not the pen tool i double checked. this problem has been bugging me for a few months now. any suggestions?
View 2 Replies View RelatedI have a problem to do with zooming. Every second zoom I do the picture is pixelated. It doesn't happen in Illustrator, so why does it do this in photoshop?
View 4 Replies View RelatedDo you know of a way to get absolute non-pixelated 45 degree lines in photoshop? I'm a little tired of having to go back and forth from illustrator just to get clean lines.
View 4 Replies View RelatedI'm on a laptop, I work a lot on keyboard shortcuts and sometimes press something,and have no idea what I press. Unfortunately this time I have no idea what I did, and my text has gone funny.
I've exited the program and gone back in to no avail, it still looks pixelated and less quality than it should be. Here is an example of Times New Roman: