Photoshop :: EXTREMELY Odd Cs4 Bug!

Mar 22, 2009

photoshop has been unusable ever since ive installed, and reinstalled. when i load an image all these weird lines form and there is no apparent way to get rid of them. Is there a patch for this, or any other method to solve it?

View 6 Replies


ADVERTISEMENT

Photoshop :: CS6 - CC Running Extremely Slow?

Jul 3, 2013

Same system...  CS6 runs perfectly fine, close it, then load CC, not even workable.  Close CC and reload CS6 and it runs fine...

Is CC really that much more hardware dependent?  I feel like the issue is software related and has nothing to do with my machine...  My Machine isn't some kind of powerhouse, but it does have 8gb of ram, and again, no real issues with CS6...

View 4 Replies View Related

Photoshop :: CS6 Running Extremely Slowly?

Sep 14, 2012

So, I purchased CS6 when it was released and have been dealing with it's ridiculous speed ever since. It's gotten to the point where I can't tolerate it and can get no work done inside of it.
 
Basically, the main issue is the menu bar. I'll click on File or Image and have to wait at least 5 seconds for the menu to drop down. In the layer pallette I'll go to Alt Drag a layer and it'll freeze for a good 5-10 seconds, then reset and let me drag at will. Until I want to do another layer...then it does it all over again. Brushing occasionally becomes painfully slow and delayed. I used CS4 for years and never had these problems on the same computer. I work with extremely large files and am only having trouble with them after upgrading to CS6.
 
I'm running on Vista, yes I know. 6GB of Ram, so that should not be the issue. I do plan on purchasing a Mac in the next few months, but really need this problem sorted out Asap. I've googled endlessly and cannot find anything that works. I've changed drawing mode to Basic, disabled OpenGL, seemingly all of the obvious fixes, that haven't worked.

View 1 Replies View Related

Photoshop :: 13.0.4 Runs Extremely Slow

Apr 25, 2013

Just got a new MacBook Pro Retina and Adobe Creative Suite 6 Design Standard. OS x 10.8.3 and Photoshop 13.0.4 runs extremely slow. Why?

View 1 Replies View Related

Photoshop :: Why Does CS6 Make MacPro Run Extremely Slow

Dec 23, 2012

I use actions for my photograpy images.  I use CS6 PS and LR3 side by side and it continuously freeze my brand new mac and also did the same to my old PC.
 
A computer annaylist friend said it may be the way i use PS - I cant see that to be honest as all I do is open the raw image - run an action and then save it back to LR.  But then saying that after speaking with other photog friends - they tell me they dont have a problem when they do the same.

View 3 Replies View Related

Photoshop :: Brush Size In CS6 - Extremely Small?

May 29, 2012

what ever size canvas i choose, my brushes come out extremly small ! how can i resolve Photoshop CS6

View 7 Replies View Related

Photoshop :: (Contrast) Function Is Extremely Weak

Oct 27, 2012

Is it my imagination of has Photoshop's Brighten/Contrast function weakened substantially? The Brighten/Darken part works as it always has, but the Contrast part does virtually NOTHING. As a matter of fact, I've noticed it actually KILLS any contrast my art has. And "Curves" doesn't fair any better! Am I doing something wrong? I just got a recent bersion of PS and my last version was 10 years old, so maybe the Contrast has been like this for years.  I may have to go on my old Power Mac and use my old PS for Contrasting. Is there a more effective way to contrast my pencil art?

View 2 Replies View Related

Photoshop :: CS4 Running Extremely Slow Compared To...

Oct 19, 2008

I installed Photoshop Extended CS4 64bit. I opened a 24mb PSD file, there is some text with some outer glow when I move it I get redraw. CS4 just feels sluggish compared to CS3. My system is not that bad, e6600, 4GB, 8800GTS 640, Vista Home Premium x64.

I have updated to the latest drivers for my GPU. I am considering just a reformat and install.

View 39 Replies View Related

Photoshop :: My Fonts Are Displaying EXTREMELY Small

Oct 7, 2007

For some reason, i have to make my text the max size in order to see them! When i set the font to 1296 (the max) i can see it as if it were approx. 18 pt or so. has this happened to anybody else? what can i do?!

View 3 Replies View Related

Photoshop :: Extremely Large Font Antialias

Jul 30, 2008

I am creating posters in Photoshop CS3 to be printing at 16" x 20" / 360lpi. Therefore, I create and add layers to a base 360dpi image sized at 16" x 20". I am not able to add large text (font size approximately 256 points) across the image without experiencing severe antialiasing issues when viewed at 100% regardless how I set the AA value (smooth, sharp, crips, strong).

Is there any possible way to get around this issue without having to buy expensive vector based software to create my textual layers. I image it would be very difficult creating text in a vector appliction when it needs to match the shape, color and styling of my target project image in Photoshop.

View 4 Replies View Related

Photoshop :: Why Is CS6 Extremely Slow With Brush Tool Using Wacom Pen

Dec 7, 2012

The psd processor spins not stop until I pick up the wacom mouse and click on an adjacent layer then back to the layer I was working on.  Then the wacom pen  work with the brush tool.  This seems to happen when every time I  pick up the pen and go back to the brush  tool.

View 7 Replies View Related

Photoshop :: CC Crashes Extremely Slow When Running And Opening PSB Files

Oct 10, 2013

I'm working with a 2.73G PSB file that will be printed in a large format printer and eventually end up as a vinyl wrap for a cargo trailer. I've never worked with a Photoshop document this large but from what I've read, PSB's can be up to 4G.
 
When I open the file, photoshop goes through the trouble of loading the file (the progress bar loads all the way) but when it trys to actually open the document, I get a message from Windows that the program has encountered a problem and has to be closed. At an early stage of working on the document, when the file was less intense with layers and blending modes, the file would open but crash when saving.
 
The funny thing is that my co-worker runs a MAC with lower specs than mine and the file opens and seems to run stably. I'm thinking it could be a RAM issue but according to CC spec's my machine should work fine?
 
On my machine, I'm running:
 
Windows 7 - Service Pack1
Intel Core i5-2400 CPU @ 3.10GHz 1.60
8.00 GB (2.98 GB usable)
32 Bit
 
I've also read that to access your full RAM's capability you have to be running 64 bit but I'm not sure about this?

View 3 Replies View Related

Photoshop :: CS6 Extremely Slow And Sluggish / Brush Tool Delay

May 24, 2012

I own a copy of Photoshop CS6.Switching from Photoshop CS to CS6, I have found this version to be extremely slow and I can not find a reason why it is like this. It is impossible for me to work on it.
 
Problem: Slow performance, when using the brush tool there is a long delay - lag. The brush takes more than 8 seconds to catch up with my strokes.

Software:Adobe Photoshop CS6 x64OS:Windows 7 x64 SP1CPU:AMD Phenom II X4 965 BEGPU:Radeon 6790 OC @ 920MhzRAM:A-Data DDR3 1333Mhz CAS9 4GB (x2)SSD:A-Data 510 128GB SATA3HDD:Samsung SATA 1TB 

Tried:
- Memory usage allowed upgraded to 6GB, nothing changed.
- Default selected "Scratch Disk" is the main SSD which has over 58GB of free space, I've tried selecting the secondary HDD as well but nothing changes.
- Disabled the "Use Graphic  Processor" square. nothing changed.
- Disabled the "Use open CL" square in advanced Graphic Processor Settings. Nothing changed.
- Changed power management settings in windows to "High Performance". nothing changed.
- Disabling tablet pc service doesn't work.
 
Notes:
- Graphic drivers are the latest release on AMD website
- Windows is completely updated
- SSD Firmware is the latest available.
- The issue happens both with mouse and tablet.
- 1px brush and 5000px brush lag just alike in zoomed and not zoomed canvas.
- This happens on both x64 and x86 versions of the software.

View 59 Replies View Related

Photoshop :: CS6 Extremely Slow After Changing Text Engine To Middle Eastern

Aug 28, 2013

I'm using PS CS6 13.0.5 x64 on Snow Leopard (iMac 27" late 2012). I tried to change the text engine to Middle Eastern, but after I restart PS, the program is nearly non-responsive, and it takes forever to edit text. Changing it back to East Asian solves the problem, but then again, I want to use the Middle Eastern feature...
 
When I use Illustrator CS6 I don't have such problems (although I have to write backwards, since there is no support for right-to-left in Illustrator in my version)

View 4 Replies View Related

Photoshop :: Extremely Slow Print Dialog Response In CS4 (Windows 7 64bit)

Jan 3, 2012

It's a Q6700, 4GB, 2TB drives, Epson R2880 running Windows 7, 64-bit.  CS4 is very peppy, runs great, opens, closes, edits, NO PROBLEM.
 
UNTIL you decide to print.  Once you hit the print selection it takes a MINIMUM of 40 seconds for the CS4 print dialog to appear.  If you then hit the "page setup" button, it'll be at LEAST another 30 seconds before that appears.  Once they're up, you can navigate around and make changes, but once you hit the print button on the dialog it'll be another 10-15 seconds before it responds and if you specify "Print Preview" it'll be at least another 30 seconds before you get the preview.  Once it hits the printer, it prints fine.  There haven't been any software or hardware changes in weeks, except the weekly MS updates that get installed.
 
I've tried large images, and small images in case there was something CS4 was doing.  This process is this slow when printing a 4x6 greeting card or a 12 x 18 photograph.
 
What's interesting is this is a new phenomenon...  It worked FINE up until sometime last week.  Then suddenly, slow.......  Concurrently, the print dialog STOPPED DISPLAYING INK LEVELS.  The status monitor still displays them, but the printer dialog no longer does.
 
I've unloaded the printer and cleaned off every file I could find that appeared to be associated with an Epson print driver.  Went to Epson and got the latest, Windows 7, 64-bit set of drivers and status monitor and installed that.  No difference.  Also tried a new USB cable AND switched it to the other USB port on the printer and on the PC.  Nothing's made any difference......
 
If necessary, I can have her re-install CS4, but is there anything that should be done before we start clobbering major applications, or ever worse, the operating system?

View 24 Replies View Related

Photoshop :: Bridge CS6 - Extremely Slow Preview Updates And Image Deleting

Jan 7, 2013

1. Updating previews (100%) is very slow.
 
Bridge CS6 has problems updating the previews of images that get edited.While creating preview from scratch is rather swift, updating previews takes about six minutes on a MacBook Pro retina with 16Gb RAM.After one minute the preview gets updated,  but then the busy signal in the low left corner just keeps turning and turning for five more minutes.Why is this happening? Is Bridge still busy with those previews? Why? The preview has already been updated, why those extra five minutes of business?
 
2. Image deleting is painfully slow.

You type Command + Delete, and nothing is happening for five, six seconds.Only then the images get deleted. Has noticed these two hold-ups?

I just went back after writing and editing this post, and Bridge is still busy with the preview update. This is now 15 minutes after the image had been edited. The busy signal in the lower left corner just never turns off again.
 
It feels like Bridge has also problems working in the background. As soon as you open e.g. a browser to bridge the waiting for bridge, Bridge seems to keep the busy signal rotating, but not actually doing anything until you close the browser again. Which is why I just had a 15 minute wait for an image preview to finally update. The time spent in the browser did not "count".

View 3 Replies View Related

Photoshop :: Pen Tool In CC - Draw Path / Line Extremely Jagged And Rough

Oct 25, 2013

Did the programmers make the pen tool in CC worse or am I missing something. If I draw a path in cc and stroke it with a 2px hard brush the line is extremely jagged/rough. If I do it in CS6 that I own, the line is smooth and very fine. What gives?

View 5 Replies View Related

3ds Max :: Viewport Always Ran Extremely Slow

Apr 27, 2013

I've been using 3DS Max 2013 on a Win7 PC and my current project has some extremely heavy scene files. I know about layers, meshsmooth render iterations, and all the basic techniques, but despite all that, Max's viewport has always ran extremely slow. recently my boss gave me a new (extremely more powerful) PC, only thing is, it runs Max the same, if not worse, and I don't know what to tell him.

By all means this is a much faster and more powerful PC but it runs 3DS Max horribly.

View 2 Replies View Related

GIMP :: 2.6 Crashing / Extremely Slow?

Aug 17, 2011

Ok, so I have been using Gimp for around a year now, I love it! Have never had any problems... until now. Ramdomly enough it has decided to stop working for me. On start up it takes alot longer than usual... 20 - 30 mins longer than usual! The start up splash screen freezes, along with the rest of my desktop. I always run it with nothing else running so I don't think there's anything conflicting there.

My windows updates are fully up to date, along with drivers etc. This really frustrates me because as I said, I have been running Gimp for almost a year without a single glitch.

I have also tried uninstall/reinstall, tried running the older build. If I do by some miracle get it to run, its extremely slow, freezes during simple tasks. Specs below -

OS
MS Windows Vista Home Basic 32-bit SP2
CPU
Intel Celeron T1600 @ 1.66GHz16 °C
Merom 65nm Technology
RAM
1.00 GB Single-Channel DDR2 @ 332MHz (5-5-5-15)
Motherboard
Hewlett-Packard 3612 (CPU)57 °C
Graphics
LP156WH1-TLA1 (1366x768@60Hz)
Mobile Intel® 4 Series Express Chipset Family
Mobile Intel® 4 Series Express Chipset Family
Hard Drives
156GB Seagate ST9160310AS ATA Device (SATA)48 °C
Optical Drives
HL-DT-ST DVDRAM GSA-T50L ATA Device
Audio
Conexant High Definition SmartAudio 221

View 3 Replies View Related

Premiere Pro :: CC Extremely Slow On Export?

Jun 30, 2013

I just started testing the new premiere CC as a replacement for the Pro5.5.
 
Most of my clips are AVCHD from the dreadful Panasonic 130 / 160 cams.
 
Although the new premiere works well as far as handling these clips (surely better then CS6 with the BUG) , when I try to export to mpg2 DVD … well …. Trees grow faster.
 
For some reason the premiere cs5.5 does it faster, way faster than the CC. The CUDA engine is active in both cases, but has no visible effect on speed. The computer I am using has the I7 6 cores dual threads, 32 GB memory, SSD for system disk and GTX570 for GPU

View 28 Replies View Related

AutoCAD 2010 :: Plotting Seems To Be Extremely Slow

Jan 22, 2013

I recently upgraded from ACAD 2004 to ACAD 2012. In ACAD 2004, plotting was extremely quick. In ACAD 2012, plotting seems to be extremely slow. A basic drawing in 2004 plotted as a pdf file using CUTE PDF or PDF Creator would take about 5-10 seconds. In ACAD 2012, a  similar file using the same CUTE PDF or PDF Creator will take up to 2-3 minutes. Not a long time but when you are plotting a dwg set that has up to 10 tabs in it, it takes 20-30 minutes just to plot. Is there any way to speed up the plotting in ACAD 2012? I have both ACAD 2004 and ACAD 2012 loaded on the same computer.

View 4 Replies View Related

Mudbox :: Using Extremely High-res Mesh For 3D Printing?

Mar 8, 2013

I'm trying to find a way to export my mesh to any programs that can convert my mesh to STL, preferably optimized like ZBrush is able to do.

However, in order for me to reach the desired detail amount in Mudbox I have to subdivide the mesh quite a lot and if I export the file as OBJ it is bigger than 2 GB.

If I try to import that model to ZBrush for instance it won't load because it doesn't support my amount of RAM. Is there any way at all to convert that big file to something more optimized or simply to STL without giving up on the amount of detail?

In other words, is there a proper way to use an extremely high-res Mudbox mesh for 3D printing?

View 6 Replies View Related

AutoCAD 2013 :: Print Out Extremely Light?

Dec 26, 2013

I received a layout of a building from a architect. When I try to print it out it is extreemly light. This happens no mater what printer or ploter I use. I have changed line weight with no success.

It seems to always happen when I get a building drawing from an arhitect.

Even the new items I have drawn like conveyors , tables stc. come out nearly invisable.

View 3 Replies View Related

Illustrator :: CS4 File Size Extremely Small?

Mar 5, 2014

I am having issues with Illustrator creating file sizes that are only 100-200KB.  And when I print, they are pixelated.

View 1 Replies View Related

Lightroom :: Program Seems Extremely Sensitive To Pictures

Aug 6, 2013

I have a problem with my new Lightroom 5 version. The program seems extremely sensitive to pictures and will be opened when I look at a picture in facebook, or even when I look at people's status. While importing photos from my camera, sometimes the program suddenly responds to a facebook image and tries to import it, and stops importing my photos. I am not familiar enough with the program to get back to the import process, and have to close and re-open the program. Some times the program has been in a process of exporting photos to jpg files, while it suddenly responds to other photos and tries to import them. Once the export process continued, but a couple of times it seemed to stop. Is there a way to prevent these problems?  This problem didn't occur with the Lightroom 4 trial version.

View 2 Replies View Related

Premiere Pro :: Export Showing Up Extremely Pixelated?

Feb 2, 2014

Why does my exported video look extremely pixelated and odd even though it looks completely normal in editing? 
 
Premiere CS6.  Exported in 1080p.

View 6 Replies View Related

VideoStudio :: 12 Extremely Slow When Library Full Of Clips?

Oct 8, 2010

My VS12 on Windows 7/64 machine with 4G RAM has slowed down dramatically when I have lots of clips in the libraries. I have several libraries based on themes, each with about 10-20 clips of 10-20sec duration (PAL MPEG2 clips, no HD). Loading into the libraries from the external USB2 hard drive is extremely slow. With each clip to load VS12 gets stuck for a while and until all clips are loaded it takes a long time) And when you want to move the scroll bar in the library it does not move, you have to click several times and the mouse just shows the blue ring for a long time and you get Windows to react that VS12 does not respond. When I try to enter a new library it will only show after I click "Close" several times and with a long wait.

When I delete most of the libraries VS12 runs a bit quicker.

All other programs (for instance Firefox and mail) run well and with normal speed (normally I have them closed when using VS12). So it clearly seems to be in VS12. I used VS12 the last time in June to edit a video and at that time it worked well, with normal user friendly speed. Since then I only updated all Windows, Adobe, Quicktime and other important program updates, but nothing else. Also Direct X is updated to the latest version Microsoft issued in June 2010.

I experience the same situation both on my Windows 7 and Windows XP machine (XP having less process power and less RAM, only 2G, but worked perfectly before). Somehow the impression is that the latest Microsoft NET Framework patch could have caused this, but I am not sure and I would not like to deinstall this patch because of the security risks.

View 1 Replies View Related

AutoCAD Inventor :: Bolted Connection Extremely Slow

Dec 7, 2011

Adding of a single bolted connection using design accelerator is painfully slow, each command is taking up to 3 minutes? It's in Inventor 2012 by the way

Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)

View 3 Replies View Related

AutoDesk Smoke :: PR5 - Extremely Slow Loading Of Project

Oct 26, 2012

Just deleted PR4, and installed PR5.Opening an existing project takes an extremely long time (maybe 20-30 mins? guessing here)The Smoke loading screen shows something like "Connecting Control Surfaces"..

View 9 Replies View Related

AutoCad :: Node For A Particular Drawing Is Appearing Extremely Large

Dec 17, 2012

My node for a particular drawing is appearing extremely large. I recall there being a set variable to adjust this, but I cant seem to find it.

View 3 Replies View Related

AutoCAD Architecture :: 2011 EXTREMELY Jumpy Cursor?

Mar 23, 2011

I have a sluggish jerky cursor (and it’s not the operator) when you are NOT in a command and while you are creating your selection set in the command. The cursor jumps and reappears @ ~1 sec intervals so you have to anticipate your mouse move to do anything. OH...and it's only happens in model space.

I tried several settings I found on the internet but nothing works. It's only doing it in 3 drawings right now. The latest one was working fine until ~10:00 this morning, then it started in...no issues before this.

It really makes AutoCAD 2011 basically unusable as it takes 5X longer to complete each command!

AutoCAD Arch 2011
Win 7 64 bit
2.93 Ghz i7
8gb RAM
NVIDIA GeForce GTX 465

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved