I'm used to correct aberrant lines before I cropped the picture in CS5. I used the short key: alt and clicked on one of the outer frames and I could "distort" the picture to remove the aberrant lines. I tried all short cuts in PS CS6, but I couldn't change the perspective. I don't want use everytime the objective correction or adaptive wide angle correction.
View 1 RepliesI have an image that contains a rectangular shape, but one side of the rectangle is bowed (as opposed to a straight line). Is there a way to make that bowed line straight?
View 9 Replies View RelatedThere are manys lines appearing in the converted OBJ file:
Â
vn -1.#QNAN0 -1.#QNAN0 -1.#QNAN0
Â
So how can I convert the correct obj file?
Debian updated GIMP this morning (2.8.2) and I notice that after cropping an image, the crop lines remain on the picture. Is this a bug or a "feature" ?
View 1 Replies View RelatedI need to crop image in autocad, path for croping is made of lines and arcs and one picture needs to be croped with circle. Is it possible to crop this way?
View 4 Replies View RelatedI'm trying to create a swatch in Illustrator with our company's colors. I already succeedid in creating a palet with the RGB and CMYK colors, but I also want to do this with the PMS colors.However, I can't seem to find the correct color book in which to locate the correct PMS color.
I only have the number of the PMS color, I don't know which color book to choose?
how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View Relatedwhy can't i get my executed crops to save?
View 5 Replies View RelatedI just got Photoshop CS4 (Design Suite Standard) last week after having used Elements (2, then 3) for the last five years. In Elements, when you use the crop tool, you can move the entire frame around by clicking on the dot in the center and moving it. It seems that in CS4, when I attempt to move the frame, only the center dot moves without moving the frame lines. I looked through the PDF manual, but couldn't find any explanation how to change this. I'll likely be back with more questions as I try to learn how to use CS4.
View 2 Replies View RelatedI want to scientifically crop 2 pixels away from an image. The image is not square but the crop will be. Is there a handy tool to do that?
View 1 Replies View RelatedI select the area to be cropped on the image.
Select "image>crop" and enter.
The picture disappears.
I had this happen with CS3 once; it was suggested to reinstall;
This time I have reinstalled PS CS4 twice (uninstalled first) and it still does this.
My PS CS3 was a separate PS package; the CS4 is part of the Adobe Creative Suite 4 (standard). The second reinstall, I reinstalled the whole Creative Suite. Still does the disappearing act.
I go to crop or use the marquee tool(such as to make a border, when I put the cursor where I want it and left click to start cropping(for example) very often the cropping lines just do not stay where I want them...they go all over the place. This happens with both tools...
View 8 Replies View RelatedI am having problem to crop using ratio instead of values of inches or pixels. In cs2 if i enter any values eg. 6 in width and 4 in height w/out specifying the unit it will use that value as ration instead, in this case 6:4. No resolution as i dont want to resample.
But when i tried this in cs3 it will use the value and i will get a 6 by 4 inches image instead of ratio.
Re: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
Photoshop 6. If I crop an image in photoshop 6 it becomes a 'layer'which I then need to 'flatten' before saving as a jpg file. How do I stop this happening?
View 1 Replies View RelatedMY PROBLEM WITH PHOTOSHOP CS2 IS CROPPING PICTURES ON A MAC
View 1 Replies View RelatedI haven't been able to figure out how to use the Straighten tool without cropping.
Â
I am starting with a full page image with Pixel Dimensions of 9750 x 13050 pixels, and a Document Size of 8.125 x 10.875 inches. I want to use the Straighten tool, and then use the Patch tool to fix the resulting irregularities around the edges.
Â
But no matter what I try, I end up with smaller Pixel Dimensions and a smaller Document Size; for example: 9725 x 13016 pixels and 8.104 x 10.847 inches. This occurs regardless of whether I have the Delete Cropped Pixels boxed checked.
Â
I also tried starting with a Canvas Size of 8.125 x 10.875 inches, and using Place…to bring in the image. But the Straighten process still results in a similar reduction in the Pixel Dimensions and Document Size.
Â
I am accessing the Straighten tool via the Crop tool. Is there any other method to Straighten?
Â
The screenshots below show the original Image Size (top) and the Image Size after Straighten (bottom).
I am having difficulty with the new cropping tool in CS6... It is said to be a huge leap forward, however, I am finding it to be a big step backward.
Â
The Issue?
Â
In all of my previous versions of Photoshop I have been able to go to the crop tool, set the size that I wanted the photo to be after cropping and that would be the size I get. This is something that I can no longer do in CS6... Or if I can it is not as simple. As a professional Photographer that takes anywhere from 500 to 900 photos per sporting event that I do, I need to be able to quickly go in and crop my photos to the size I want them to be and away I go.
How to continue this feature in the new Photoshop I will glad take it... but as of right now, I do not have the time to sit there and fiddle with the crop tool until the images is the size that I need it to be.
Is it too much to ask to be able to say I want a Photo cropped to 8x12 and actually get that?! For right now I will be going back to using my CS5 Photoshop so I can actually get my photos done.
I have a question regarding the cropping tool in PS CS5. When I attempt to crop an image by manually entering the dimensions in the top of PS it takes an insane amount of time.
I have yet to actually have an image complete the process because after waiting about 30 minutes to only have the image be at 30% progress I cancel the operation. It is only when I enter the dimensions manually that it does this. When I just do a random crop the task is done in a matter of seconds.
I'm cropping 500mb images and the slowness of having to wait for crop generation is excruciating.
I added once ram once and did not work.this is an issue of hard drive speed correct?
when I crop a picture and I want to move te framework to make a good crop, the picture oves, not he cropping-framework. I expect it is just 1 little adjustment, but I can't find it...
View 4 Replies View RelatedI'm new to CS6 and I'm having trouble cropping .CR2 files. Basically, I've just found out that I've been editing all of my RAW files as JPGs on CS5, which meant that I've been storing those huge files on my computer, but haven't been using them to their full potential. Now on CS6 I discovered Camera Raw, but I'm a bit confused as to how cropping a .CR2 file works on Camera Raw and on CS6.
Â
If I open my .CR2 on Camera Raw, click 'Open Image' then use the Crop Tool, the image looks incredibly grainy (see below).However, if I open on Camera Raw and crop it there before clicking 'Open Image', it looks fine (see below). Why is that?I'm using a 5184 x 3456 px, ISO 400, 43mm, 0 EV, f/5.6, 1/60 .CR2 file and cropping it to 714 x 516 px. The image doesn't look grainy on Preview.
Â
Also, when I open the .CR2 file on Photoshop, the image looks really dull and lifeless compared to when I see it on iPhoto (see below). Is that because the RAW file is stripped of all settings to give me more flexibility when editing it? If so, is there a way to match the settings that I see on iPhoto?
In previous versions of PS I could just move the crop area around freely, rotating and resizing it. But now it seems it always snaps to is default position and I need to keep the CTRL-key pressed if I want to move it around without snapping.
View 1 Replies View RelatedI have a directory from a client with around 20,000 photos. most are in landscape format, while some in portrait format. The client wants all the photos cropped to 800x600 for the landscape and 600x??? for the portrait. With such a large number of photos what is the best way to get this done. Is there any type of logic I can apply to a photoshop script that can determine the image size and what it should be cropped, or resized to?
View 9 Replies View RelatedI can't do any cropping, Photoshop just hangs. MacBook Pro, CS 5.5, OSX 10.8.2, 4GB ram, almost no other programs running, two scratch disks.
View 2 Replies View RelatedOk, I understand that the kids at Adobe would like to change things around in "upgrade versions" of Photoshop. However for working photographers and professionals that crop A LOT of images in the course of their work, the new cropping tool is a DISASTER! A few may like the new tool... however, there are many that don't.Â
[URL]...
Â
To the point, here's how to fix the problem. Adobe, you have the CS5 PS cropping tool code... please put that code EXACTLY as it is in CS5 into the "Classic" option for CS6 PS. This way, those who WORK with Photoshop and PAY to use the software can get their work done using the excellent crop tool as was in CS5 (which I have downgraded to so I can get work done) and those who are giddy about the new crop tool can play to their hearts content.
Â
Adobe, you are upsetting a lot of paying clients with your new crop tool and the "faux" classic tool option. You might want to address this issue soon!
If I may, I'd like to know the answer to this. For my own edification....
Â
I have an image that is 16 x 24 inches. It has a certain file size.
Â
When I crop the image with the cropping tool, and set the tool to 16 inches wide by 24 inches high, the image file size increases significantly.
Â
Is this what is called "resampling?"Â The setting in the image size is set for Bicubic (for smooth gradients).
Â
As an example, I saved the file (from a RAW conversion to jpg), and it was 14 Mb. When I cropped it, it jumped to 19 Mb.
I have a multilayer image, I want to only crop one of the layers. When I do crop, it crops the entire image. Can this be done w/out moving the layer to a new file, cropping and then moving back to the original file?
View 4 Replies View RelatedI want to crop individual layers in a PST file is this possible or will I have to copy the layer to another PST file, crop it, and then copy and paste it back to my original file?
View 5 Replies View RelatedI have an image and there is a text on it. I'd like to cut out only the text. What's the best way to do it?
I'm trying to erease the rest of the image, but I can't do it properly.
i have photographed an old book of mine, and i am batch cropping and straightening the photos in photoshop, but the cropping fluctuates from, in some shots, editing out just the borders around the book, which is what i want, to editing out one whole page (of the two per photograph)- something i do not want. there does not seem to be any logic to what is edited out or not, it seems random. can anybody help with this inconsistency problem?
i want to edit out just the border (background) around the book, but leave both pages in the photograph. why at times is the program editing out whole single pages leaving only one page per photograph?
P.S. just to update, i have realised that perhaps the problem has to do with the fact that the two pages on the book have, like all books, a dark line vertically down the centre between both pages where the binding is. think of a photcopied page which has a dark line down the centre separating left from right page. i believe that photoshop reads that black centre-line as a border itself and so edits one page out; it assumes the black line is a border and edits out everything outside of it (which contains the other page).
now i'm not sure how to overcome this. is there a way i can set it so that the cropping feature works on some rough template to do with size? the page sizes are relatively similar, so if it used a size-type template to crop, it would work well. this problem is random and not all photographs are problematic, but quite a few seem to cut out one whole page.