I want to drag a watermark onto an image and resize it and record the process as an action. I can't seem to make that work. Is it possible? Is there a tutorial somewhere that explains the process?
View 3 RepliesIs it possible to combine two mattes in action?
I load a front back and matte into action. And let's say, I want to add something to that matte, is there a way to do so? Obviously it doesn't work with the keyer, since, as soon as I enter the keyer, my matte is "gone".
My workaround so far, was to create the new matte in action, output it to the edit desk, and then blend them together within a container and then take that back into action....
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I am trying to combine images - a person and a backgorund....place person image over background - use pen tool - smooth edges........all good
BUT.....it just looks fake.....
I want to take two pictures that are the exact same except one is mirrored horizontaly.
It is a clip art picture of a golf club.
The pictures are both at angles and I just want them to cross like an X.
how to combine two images i want to replace the face of one image buy another face without any traces. just want to have fun doing it.
View 1 Replies View Relatedusing 7.0.
I just scanned a brochure which was too long for my legal-size scanner as two .jpg image files.
I think one uses layers to move and join one image to the other. But when I move a layer from one open image over to another, it is just blank there,
I have three seperate jpeg images that I need to join into one jpeg image. They are all cropped and sized in CS3. How can I do it in CS3.
View 12 Replies View RelatedI want to cut an image of 2 flags diagonally and and then put the triangle of one flag together with the triangle of other flag . . .
1. How to cut the flags diagonally?
2. How to put the two triangles together to creat a whole flag.
When I have made 5 HDR RAW pictures and want to combine them within CS6, the program Photoshop stops working. Why is this happening? What am I doing wrong? I juist follow the instructions of the book.
View 2 Replies View RelatedI am a molecular biologist trying to use either photoshop or illustrator to label data (I have both programs, 1 may be better than the other for what I need, but I am not sure). The data I want to label are essentially pictures, of varying size, with a resolution of 50pixel/cm (around 127ppi).
The best analogy of the transformations of my data would be a picture of some random object taken next to a ruler. I need to label the ruler, then remove the actual ruler and just leave the labels. I have several of these pictures, and I label them like this individually.
How can I combine separate jpg images onto one page in Photoshop Elements 11
View 1 Replies View RelatedI was thinking about combining a swimming pool water object with an environment like the attached file.
View 2 Replies View RelatedI have uploaded two images to gimp and have made minor changes to parts of each image (erased). Now I want to combine those changed parts in one image. How do I do that?
View 1 Replies View RelatedUsing the software Photoscape is easy to combine a plenty of images. URL... if it is possible to deal with it in PSP in a way easy way as Photoscape?
View 5 Replies View RelatedI want to know how to insert a customized/colorful font like the one seen in the attached picture (Darknet). How do I do this with a generic stock image using GIMP? I want to create titles for my books using fonts that are relevant to the book title.
Lets say I want to use a woman's face/body from one stock photo image and transplant it into another stock image (just the face/body even though there are other elements in the background.
Is this possible with Gimp? What I want to do is combine the two. For instance, a picture of a galaxy of stars and then paste the image of the woman onto it.
Attached File(s) cover - Darknet.jpg (88.12K)
I am trying to combine these two images (I want to keep the very top of the first image but I like the second image better...there is just not enough of her hand). How would I be able to accomplish this while also getting the perspectives to match up? I can get the hand looking ok, but then the rest of the image is funky because nothing else matches.
View 3 Replies View RelatedI'm a new user of GIMP. I have scanned a line plan that I need to modify in a series of multiple scans (plan is too large to scan in one image) and I need to recombine the multiple files back into one seamless image.
How does one accomplish this?
I ran a batch action. The action performed on all the images, I did a save and close, but then I open the folder and the change did not happen. Tried twice. So next time, I choose instead of save and close to save to new folder. the batch ran action on all images ,and the new folder is empty. I've tried the override save as checked and unchecked.
View 3 Replies View RelatedI want to create an action to apply to several images. This had to be the result. But I want to use the action for a portrait or landscape image or 72 or 300 dpi picture.
View 5 Replies View RelatedI've created a simple action that just does auto levels and auto colour on an image, and it works fine. The problem is that it still takes me a while to go through every image and aply the action. Is their a way to set it to do the action to all the images in a certain folder, and then to save the result?
View 1 Replies View RelatedI have approx 200 gifs - all 32 x 20 pixels - that I would like to increase in size to 60 x 38 pixels.
View 10 Replies View RelatedI'm working in Cs5 and I need to speed up my working process. So I have about 2000 images that I wanna print. I'm going to print them on A3 and on each A3 page I want to have 21 images. So it's a very simple process of just minimizing the pictures and putting them side by side, but almost 2000 pictures.
View 7 Replies View RelatedHow to convert 100 jpg images into single png using Photoshop in single action?
View 4 Replies View RelatedI want to prepare mutliple images for press release, that include a small border wtih copyright information. Simply every photo i work on must be submitted with a small border and the same text indicating copyright on all of them.
I import from light room and use a batch action to create the border. Thats simple enough, is it possilbe to create an action or script so that can i drop in a text layer into each of the images without a manually copying the layer text and pasting it into each file ... one at a time .
I need a way to take images of a preset size and slice them up into seperate little image squares which are each saved with a sequential number starting with the first square (top left) but in a grid type pattern - so the first square would be saved as '1-1.jpg' and the one to the right of it would be '1-2.jpg' and the one to the right of that would be '1-3.jpg' etc. Then the next row would be like '2-1.jpg', '2-2.jpg', 2-3.jpg' etc. and so on.
Is there anyone who would possibly be able to help write an action to do this automatically?
I know it's a large request but I'm not so good with complex actions and don't know where to begin with this.
Please help if you can. The final 'diced' images are to be used in a website which is a college project of mine, I'm fine with building the website, I'm just not so good with actions and really don't want to have to slice a number images individually (I'm currently estimating there will be a large number of little squares per image - something in the region 300 or so...). If anyone can help I'll work out the exact figures and dimensions so it can be done.
I am looking for an action or preferably a way to create one, that takes a GIF file with multiple images (=animation) and puts all images side by side and saves it.
View 9 Replies View Related how to create an action or script that could take all images in a folder and crop them to an aspect ratio of 16:9 and then resize them to 640x360?
I can't just change the pixels to 640x360 because that would distort the images as the current aspect ratios are not 16:9.
I have 30 dirs, each of them with 4 thumbs in it. I want to make one big thumb of every 4 smaller ones, by resizing and fitting them together into square. Like
Thumb1 right next to Thumb2
below
Thumb3 right next to Thumb4
and then save that image.
Would you give me any direction how to do that? I'm with CS3. I did explore the auto and script options in the File menu, but still unable to get idea how to do that, if possible at all
i would love to be able to create a single photoshop action for adding a border, plus a signature in the bottom right corner, that works for both portrait and landscape images.
need i say more?
i already have an action that adds a signature in the centre of the border at the bottom of the image e.g. the image below. what i want though is for that signature to be on the RHS and for the same action to work for portrait images as well.
supplementary info: reason for this is that I want to be able to export 300 wedding images (mix of landscape and portrait images) from lightroom in my pre-selected order (meaning the files are labelled from 001 to 300, ordered according to how the wedding day unfolded) and then use PS to add the border and the signature, in the same place, and for it to work for both orientations.
i need this to work for full sized exported jpeg images, i.e. i want the files that i give on CD to my clients to include my signature in this manner. so I don't want to copy the initial layer and then reduce the second layer size to leave a border around the second layer.
i hope i've been clear I think that this sort of presentation makes such a difference to final printed image, and I DONT want to have to go to all 300 images picking out the landscape from portrait ones (although this may be what I have to do and wouldn't really take that long but surely there's a better way!!!!).
I would like to automate an action set that selects a raster image (linked file) that has been grouped with vector art and then converts that selected raster image into a vector (live trace)
View 11 Replies View RelatedI would like to automate an action set that selects a raster image (linked file) that has been grouped with vector art and then converts that selected raster image into a vector (live trace)
I'm using cs5 on a mac. As far as format goes I have hundreds of eps files that all have at least one raster bitmap tif which was imported as a linked file and then grouped with vector art. So I will like to run a batch script command that will select only that bitmap raster image (because I want to maintain the present vector art in the file) and convert that bitmap tif to vector- and save the file which will hopfully be in vector format.