I want to drag a watermark onto an image and resize it and record the process as an action. I can't seem to make that work. Is it possible? Is there a tutorial somewhere that explains the process?
I been given a project to align and merge three photo's to make one panorama. And there will be about 300 panorama's. So thats 3000 photos i have to align and merge. The problems I'm having it that the photographer is using an analogue camera outdoors. And i have been manually scanning them
I have tried automated merge and they don't merge. The 3 photos that make the panorama are all different angles. This isn't because of the scanning. Its the photo's i been given.
So i went with a different way of doing it. That is the first photo to make up the panorama, I tried to align all the first photo's in one go with Photomerge and save them as sperate layers. And they won't align because each photo has a different angle.
What I'm asking is a few hints. Is there addon's or something i can use to help me merge them. Or i can align every single first photo and link them, align every single second photo and link them, and align every single third photo and link them. Then all i have to do when I have done that is only use the first layer of each group to make the merge and every other photo will do the same.
When I have made 5 HDR RAW pictures and want to combine them within CS6, the program Photoshop stops working. Why is this happening? What am I doing wrong? I juist follow the instructions of the book.
I wanted to photograph a scene that had a very wide contrast range. The range was beyond the camera's ability to obtain proper exposure in the shadows without blowing out the bright areas of the scene.
I had read that Photoshop has a capability to combine one image that recorded good detail in the highlights, with a second exposure that captured detail in the midtones and shadows. So, I put my camera on a tripod and took the two exposures while maintaining the position of my camera.
Using PS CS2 and my Windows PC, I would like to merge the two images using a layer mask to selectively include only the properly exposed portions of the images. The problem is I can't get started. The initial two steps are evading me, despite consulting all of my CS2 text references. The steps are:
1. How do I get both images on the PS screen at the same time; and
2. The first image I open in PS creates a Background layer. How do I get the second image to be a layer just above the Background layer?
I've cut out part of two Images and swapped them around, but the skin colour, lighting is all wrong. Is there any ways of blending in the two Image so it makes the Photo realistic, i don't want to use the Clone stamp tool, becaus ethen i loss all detail, and it makes the photo look like plastic.
how to use Photoshop to some degree and there are all kinds of tricks out there... Well online I found images taken by an airplane in 1951 of the ground below it. They are shots of the county I currently live in. I was looking to merge some of the photographs together into bigger images. However when attemping to merge the original photographs together I've run into a roadblock. From what I can guess, the plane was flying at a different altitude and maybe a slight angle when it took each picture of the areas of the county. The images just wont line up. I attempt to rotate and skew the image but it just never seems right. I can get the rotation looking almost perfect but then some parts of the image look like its too big on one side and then too small on the other side. Its almost looks as if its been tilted on the "z-axis".
I have an A3 picture that I have scanned in 2 parts using my A4 scanner and would like to know to find the easiest way of stitching them together with PS. I am aware of Autostitch, but want to produce a high resolution TIFF image. I do need click by click instructions though as I'm still feeling my way along with PS!
I have an immediate need to overlay one image on top of another, blending the two -- like the effect you'd get if you double-exposed a film negative.
I have no idea how to to do this, and poking around the online help file isn't giving up quickly, any clues. Usually, when I poke around in Photoshop (6.0), I find it pretty undecipherable.
I am a molecular biologist trying to use either photoshop or illustrator to label data (I have both programs, 1 may be better than the other for what I need, but I am not sure). The data I want to label are essentially pictures, of varying size, with a resolution of 50pixel/cm (around 127ppi).
The best analogy of the transformations of my data would be a picture of some random object taken next to a ruler. I need to label the ruler, then remove the actual ruler and just leave the labels. I have several of these pictures, and I label them like this individually.
I'm trying to vectorize an Air Force emblem and I am using the pen tool to create the shapes... Now that I've got a million pieces... How do I merge them? I put them all in the same set to keep them organized and so that I could move them all at once... But I want to merge them to apply different blending modes to them all at once... Even if I can't merge them... Is there a way to create all of these blending modes at once?
I'm creating a large map from the thousands of small, 256x256 pixel maps from google maps. I have already written a script that downloaded all the images, and saved them with a name indicating where they ought to be on the map (say, 1-1.png is top, left hand corner).
I have to now piece all of these images together. There are about 1,800 images, so doing this by hand is a real pain (I actually have already done about 1/8th of the work, and it took 1.5 hours so far). So here's my question: is there a way in photoshop to automate this.
I know about droplets and batch things, etc. But I don't know how to make 'merge two images, with the second directly placed directly below the first in the new image.' If I knew how to do this, I could create ~60 columns with everything lined up.
I'm creating a large map from the thousands of small, 256x256 pixel maps from google maps. I have already written a script that downloaded all the images, and saved them with a name indicating where they ought to be on the map (say, 1-1.png is top, left hand corner).
Anyway, I have to now piece all of these images together. There are about 1,800 images, so doing this by hand is a real pain (I actually have already done about 1/8th of the work, and it took 1.5 hours so far). So here's my question: is there a way in photoshop to automate this.
I know about droplets and batch things, etc. But I don't know how to make 'merge two images, with the second directly placed directly below the first in the new image.' I could create ~60 columns with everything lined up.
I have to take the faces off some people and merge them onto the pictures of others.
In other words picture a has a picture of a person, cut his face out and transpose it on another persons body. I've used the resizing tool (as the images and heads are too large) but I can not seem to get it merge right into the other picture all kinds of "seams" or border lines around the head of person a when pasting it onto person b.
I am using Photoshop CS2 on Windows XP Professional.
I want to create an image from four monotone images to place in a document which will be printed. The overall appearance of the finished image will be monotone (a blue/grey colour) with the four images blending nicely with a relatively smooth transition.
I have created four monotone eps images. Then I have created a new file the size of the image I want to finish up with. This is a cmyk image so I can use the cmyk colour I want to use as a background for the images. I want the images to blend into this background.
I have filled the final image with the blue/grey background colour. I then placed each of the monotone images into the final image on its own layer, using the Free Transform tool to get them where I want them.
My problem is making them blend nicely into the background colour so it looks like one image - a montage or collage. I have achieved a result which is almost acceptable but I have spent a lot of time without too much progress.
I'm creating a large map from the thousands of small, 256x256 pixel maps from google maps. I have already written a script that downloaded all the images, and saved them with a name indicating where they ought to be on the map (say, 1-1.png is top, left hand corner).
Anyway, I have to now piece all of these images together. There are about 1,800 images, so doing this by hand is a real pain (I actually have already done about 1/8th of the work, and it took 1.5 hours so far). So here's my question: is there a way in photoshop to automate this.
I know about droplets and batch things, etc. But I don't know how to make 'merge two images, with the second directly placed directly below the first in the new image.' If I knew how to do this, I could create ~60 columns with everything lined up.
I have photographed 19 individuals (full body shots, same lighting, same backdrop, etc.) and I am now trying to merge the individuals onto a background to create a group photo.
I can not grasp how I keep the individuals in proportion to each other. I am familiar with holding the shift key when transforming but how do I know that John is in proportion to Steve is in proportion to Mike etc. in the finished product?
I photographed the background with no one on it to use as the background for the group. I open each individual's photo and lasso their image and use the move tool to bring that image onto the background. But I get nervous and can't seem to get anyone to look in proportion and natural.
I have to make an animation for a game, and I have to put a large number of images exactly next to each other in a line. This takes a lot of time to do by hand. Is there a way (or software) to do this automatically?
I want to merge multiple images using PS Elements Editor/Organiser for Mac - when I click 'expert', then 'enhance' then 'photomerge' then 'Panorama' as suggested in 'Help' I get this error window.
I'm trying to use one image as a background for another image. I can make a layer on one image, and a layer on the other. But I can't see how you maerge the two?In Pshop you simply select it all then copy and paste and you have 2 images in seperate layers, but Elements doens't work like that.