I've run into a problem that I'm sure has been a popular one for many. I recently edited a photo of mine in Photoshop CS5 and when I save it to JPEG format and open it, the color is completely different. I've searched the web but for me solutions hasn't worked such as using sRGB and changing the working spaces to adobe RGB (1998). Both of which hasn't worked.
View 18 RepliesWhen I have a file in Illustrator that I want to save as or export as a PDF or JPEG whenever I save it the colours shift and the quality drops.Most noticiably black boxes goes to a muddy brown when saved to JPEGS, but I have also noticed tones in Photographs change quite a lot when saving as PDF.
I have tried to tweek every type of setting there is. higher resoulution, compression, sampling, down sampling, PDF preset, print quality etc.but nothing seems to sort it out. PDF's arent as much as a problem as the JPEG but the only way I have managed to get a PDF up to a reasonable standard is by wacking everything up so there is no compression or downsampling which makes ginat files I cant email....
Im sure the problem probably lies within the combination of each of these together but I cant seem to find out what that is. Also brown in the seat base has gone more orange and the whole picture has generaly lost quality.
I have an old (as in OLD) version of Photoshop- Photoshop 7 that was a (uhm) gift from a friend, it's always worked 'well enough' for me in the past, but in the last few months I've been having issues saving something as a JPEG file.
The program will let me save it, but when I go back later to open the file, I will get an unwelcome pop up box announcing "Could not open _____ because an unknown or invalid JPEG marker type is found" I finally started saving everything as a PSD or PNG file just so I could keep working, but I need to start converting all these files to JPEGs so I can keep working! Photoshop isn�t doing this all the time, but enough that if I start saving things a JPEGS I'll stop checking my files after a few times, and them WHAM- I have 6 or 7 files that I can't access anymore!
When Im using a pdf or a psd file, certain instances wont save as a jpg unless I follow the suggestion below.
"could not save a copy as'fileserver...plan.jpg' because there is not enough memory (RAM). try saving without optimization or as baseline JPEG"
This is usually when there are larger files being worked on, but it never used to do this before.if I do as the error says it works but it is in bad quality.
I have got 4GIGs of ram and 4GIGs of V-memory in place I cannot add any more to it.
I.m trying to save some of my digital photos, which are .jpegs, in a .BMP format and at a high resolution, around 400-500 Dpi. I managed to change one of them, using Adobe PhotoDeluxe, and it came out at 118 MB. It's just what I wanted. But when I tried to do this a second time, I couldn't duplicate my actions. The second photo came out only at 3.8 Dpi.
I need the big files for work I'm doing in Paint Shop Pro. I have Adobe PhotoDeluxe HE 4.1 and PhotoShop 7, MGI Photo Suite, PrintShop and others.
Working in raw, I have made changes to exposurre etc. when I save to jpeg they go lighter. I have looked in the colour settings which are set the same as the camera at sRGB but not sure if I a missing something.
I have recently upgraded from CS4 to CS6, wasn't a problem in CS4, I have looked at the settings in both to try to get them the same but nothing is working.
I'm having trouble saving images as a JPEG. I've never seen this before, but when I scan an image or even create an image and try to save it as a JPEG so it's smaller and easier for others to view Photoshop freezes...kind of. All of the buttons become inaccessible and the image does not save. I can't even close Photoshop until I enter task manager and end it manually.
View 6 Replies View RelatedI have a large psb file which is an image of 39k by 27k pixels at 48 bpp. The image size is about 5.7 GB. PS CS6 trial only gives me the option to save it as a TIFF or Photoshop RAW only. I would like to use this large image as a master copy from which I can sample lesser quality images for printing. How can I save such images as a JPG or BMP file, that is down sample it and place the result in a smaller jpg or bmp file?
I read some other similar discussions and they all concern problems with the plugins folder. I have not inserted any plugins from previous CS versions. The only plugins that I have in there are authorized CS6 plugins for the scanner fix from Adobe. Is it even possible to down sample from such a large image?
I'm working with Photoshop 7 on a pretty new PC, and I keep having trouble with saving JPEG files. Initially, I was able to save them just fine, but now they are saving as invalid files. The program is not crashing mid-save (unless it is crashing and recovering without me needing to re-open it). Other file types seem to be saving just fine, though PNG ones seem a little touchy.
View 9 Replies View RelatedBasicly i have made a flyer design for an event im doing, but i can only save the file as a photoshop image...i need to save it as a jpeg.
View 6 Replies View RelatedI am trying to save a psd picture 125x500 picture. It is a simple gradient with nothing else in the picture. The psd saves with good quality. As soon as I save for web or even save as a jpeg or gif the quality is junky. Even with the jpeg file at maximum and not optiized there are chunky vertical lines. How can I fix this? The psd file is like 138k, but I can't save it more than 12k as a jpeg or gif.
View 3 Replies View Relatedi went from photoshop 6 to CS so i don't know if it's a CS problem. i've noticed that unless i use the "save for web" option, the regular save produces jpegs that are much larger than photoshop 6, using the same settings.
also is there a way to turn off color management completely? i can set the preference to not manage colors but it defaults to my monitor color profile and i don't want it period.
I just purchased Photoshop Elements 7, hoping for a simpler piece of software.
1. It comes with no manual so I'm no better off than with the company installed Photoshop 7 software from several years ago.
2. When I go to save a photo I have no option to save as a jpeg/jpg file.
When I try the Help tab, I eventually find that PSE 7 does supposedly save in jpeg/jpg format. If it does where the heck is that option in my save/save as menu?
1) I scan an image and its 300dpi. when i open it in ps its 72dpi. what's happening?
2) When i create a new document/clipboard etc to start working, i only have the option to go up to 8bit or 16 bit RGB... Can't it go any higher? does this affect item1?
3) if i try to drag an image into this 16bit window it tells me the target document has a different depth than source document and it will result in lower than expected quality..... how can i avoid all this?
4) Sometimes i can save my psd as jpeg and sometimes i cant... I dont get that option...what's going on?
I have a picture a i've cut some part of it. Now i would like to save this cut/selection in a new .jpeg file.
how i can save a selection to a .jpeg file?
I use CS2.
I'm trying to save an image as a JPEG along with it's transparent background.
However, for some reason.... when I save it... no matter what I do (highest quality, no matte, etc), there is still a white background.
When I save it as a GIF, it kills the quality but has a transparent background...
I can have high quality but no transparent background or low quality or transparent background
I am working on a file that contains a layer with filter effects. It looks just like I want it to as a psd file, but when I save it as a jpeg, the effects are very light. When I print it, the effects are barely visible. How can I preserve the original look?
View 14 Replies View Relatedi've been noticing that the program has seemed to run slower than it was a few months ago - taking longer to load up, buttons being unresponsive for a few seconds, etc. recently i noticed if i'm saving my psd file as a jpeg it will 'hang' for several seconds with the "ok" button greyed out. after several seconds it will turn blue but when i click it, it acts unresponsive but after a few more seconds it saves the document. but there's no click animation or whatever you might call it.
some specs - intel core i3/ 3.06GHz/ 4MB/ ATI Radeon HD 4670
When I save an image as a jpeg from the "Save As" dropdown menu (NOT save for web) all of my paths are gone when the image is repoened.
Photoshop CS6 version 13.0.5
iMAC 27"
12 gigs of RAM 5 gigs free
800 gigs of free space on the system drive
Snow Leopard 10.6.8
Disk Permissions Repaired
I shoot in RAW
Edit
Save as photoshop file
But, If I want to print them later, say at a lab or Blacks, do I convert the file to 8 bits/channel and save as a high res. jpeg?
I open my file (which has an embedded srgb color profile) in photoshop (my rgb values are 246/205/218). When I use the color picker, it confirms that my color is accurate. Then I save the file as a JPEG (using maximum-12, and baseline), also embedding the same srgb color profile into the photo (which is also my working space btw). Then when I reopen the JPEG file in photoshop, and use the color picker.... my srgb values are (246/205/219). The difference is so small that it doesn't make a huge difference, but why is this happening? My PSD file has of course maintained the original rgb values.
View 14 Replies View RelatedMy image in photoshop has thin lines, but when I save it, the jpeg shows the image with very thick dark lines, looking not like the image in photoshop. Why does it do this? How can I stop PS from doing this to my image? I want the image to look as it does in Photoshop when I save it as a Jpeg.
This is in Photoshop CS4
As it should be (using the snipping tool (I can't use the snipping tool as my only option, because it will only capture the size as it is on the screen, not the actual dimensions in Photoshop)
Saved as a Jpeg; the lines are thicker, and now there is little variation in line weight.
When I am editing document and save it as a JPEG the date and the time of the jpeg are not the current date/time. What do I need to do to change this behavior? I would rather that the new image have the current date/time on the file.
View 3 Replies View RelatedWhy are my photos not saving as JPEG files? When I select JPEG, they save in my folder as Photoshop files which I cannot email and most people cannot open on their computers.
View 4 Replies View RelatedWhen trying to save a .CR2 file into JPEG format, CS5 automatically switches to the 'hand' icon for resizing the image in the window.
Sometimes it is possible to 'escape' from this, but the problem repeats and the only way out is to 'close' the image (the only option available). CS5 then crashes out. (64bit CS5 on Win 7 Ultimate).
saving a file in PS6 and choosing jpeg, ps save in iff and the same thing happens in other formats.The only righteous are psd and tiff format show.
View 2 Replies View RelatedRecently I have been unable to save tiff and psd files as jpegs. When I select "save as" from the file menue I do not have jpeg as an option in the drop down menue. I have always been able to save files as jpegs until recently.
View 4 Replies View RelatedI try to save a few files in JPEG format in batches:
1. First, under Action, I open a file and include what functions to perform
2. then I save it in JPEG format which prompted a dialog box that asked for quality.
3. after I'm done creating the Action, I run the Action in batch mode.
But for each file, Photoshop generates that JPEG save dialog box for quality. this means that I have to click or press enter for every single file even while Photoshop is processing in batches!
So how do I supress that dialog box when running in batch mode and let photoshop save everything in JPEG format without pausing and at the quality I have determined when I created the Action?
I'm using Photoshop 7.01 on windows
I keep having this problem where my bevel and emboss effects and other effects disappear when i merge layers or save as a jpeg. Why would that be and how can i prevent it?
View 2 Replies View Relatedusing automated actions on my photos for a while, (rotate, re-size etc etc), but whenever I do this, every single time it asks me to complete the "Jpeg Options" box (compression levels).
Can I override this, and just set it so it automatically saves at a particular setting? when i've got hundreds of photos to have to click "ok" on each one!
Is there way to get around the process of...
I setup to batch some images with a Action i created.
I chose Save and Close, but each time it goes to save the JPG window pops up to ask me what quality, etc..
I want them to just save as JPG quality 10.
I don't want to have to hit enter after every image is processed.