I have an image of a seed that is currently black and whit and I would like to make it beige but keep the original... well ?texture? Don’t really know what to call it.... but the look of the seed. Basically I want it to look exactly the same except in a different colour.
View 6 RepliesI use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
Â
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
I'm using photoshop 8 CS,
I attached the pic. You'll see the colors range from different shades of teal to black.
I would like to change it so it ranges from a yellow/green to black instead of the teal.
Is there a way to do this? I found the color range tool, but I can't get it to do anything. After reading the help file on the color range tool I'm not sure this is even the right tool.
Using Revit LT 2014, I'm trying to make the colours used for a room colour scheme transparent. Is there a way of doing this?
View 6 Replies View RelatedWe have a Civil 3D surface using contours which are coloured according to the elevation. But when we do a surface legend, and use contours, it just numbers the contours instead of using the colours. Ever created a surface table with the colours of each contour elevation?
View 1 Replies View RelatedI can't to change colour scheme autodesk inventor 2012
View 2 Replies View RelatedI've got an issue where changing the color in one area plan scheme (future/left) removes the scheme legend from a completely separate area plan (existing/right). Â Attached are the screen shots of what I'm describing. Â This only happens when we change any of the colors in the future/right-hand scheme. Â All we have to do to get the scheme back on the other area plan is to click on the blank box, edit and reassign the correct scheme (the only one on the list), but had we not caught this, we would have published these without the colors on the one plan, so that's problematic. Â I'm wondering why--perhaps a glitch or something?
Â
This happens in multiple users' programs.
Cupcake Teddy.cdr
I have traced this image from a Jpeg into a Vector to colour but how can I change the black out lines into other colours. When I right click the mouse with an outline selected the colour appears around the line but there is still a fine black line in the centre of it. I want to change the actual outline into another colour
i dont know what i did wrong, but ever since i use the color scheme editor to make 1 color change
every color scheme is messed up...i have a green background in the winter night scheme
how can i arrange this
i've try importing the backup registry file in the color scheme editor but that didnt work
this tool really suck, it keeps showng error message..
Product Design Suite 2013
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
Â
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
Â
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
Â
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies View Relatedway to change a persons eye colour without just using a paint brush, because it obviously doesnt look right or natural,
View 2 Replies View RelatedI saw a Photoshop of a car the otherday where somene completely changed the colour of the car and kept all of the variations in shade and refelection. I have tried changing the Hue of a picture,
View 2 Replies View Relatedfirstly, need to change the colour of an animal's eye. If I change the saturation on the image then the eye changes to my desired colour but I was wondering how I just keep the eyes that colour and not the rest of the image?
Second, It's a white cat and I need to change it's fur to black. I know this has something to do with duplicating the layer, pressing Ctrl+Backspace somewhere (i think) and painting over the fur,
I'm trying 3d text for the 1st time in Photoshop Cs6 Extended. The problem is every time I create new text and and change the colour it's always showing up as black. Nothing I do seems to alter this.
View 10 Replies View Related The Lady in this photo was wearing a reddish jacket and I need to change it to blue, or any colour really, I tried the hue/sat layer method and brushing it in but the problem is (if you look hard or zoom a bit) is that her friends hands, and possibly her own neck, have reflections of the jacket on their skin..
Everything is possible.... I just don't know how?
I have a single colour pendant (blue) and would like to make a red, green and silver version. What is the best tool to do this with?
View 9 Replies View RelatedIm trying to get the photo with the black background, to have a blue background, similar to one shown. Is there a way of achieving this in photoshop?
View 14 Replies View RelatedTo change a colour or to recolour an object i would normally use hue/saturation slider.
but in this instant i want to change the colour of and image to a colour code = d8d7d3
The original colour is d8d7d4 and i want to change it to d8d7d3. I can use fill etc but everyattempt so far has left the edge looking naff. i want to keep the sharpness but by just replacing the image colour! theres probably been numerous emails like this before but i cant follow them or its for a different approach, the feathered edge.
Is there a way to change the background layer colour once you've started a document?
When I first created my document (in PS CS2, if that makes a difference) it automatically set my background colour as sepia, instead of white.
I'm now working on a painting and just realised that I can't use white; PS is calling this sepia colour white, and I can't get anything lighter.
Is there a way to fix this? I've done it on a few pictures now and I don't want to have to start everything over.
I've just tried making a new document with a white background layer and the same thing still happens! What is this?! I'm sure this can't be right! I'm on some sort of sepia scale; I can't even do grays. *desperate*
First off, my experience level is basically an advanced beginner, so speak to me as if I am a 10 year old.
Â
Now, the attached link to a Word document illustrates my issue: [URL]....
Â
I am getting horrendous colour shifts when saving to a jpg in photoshop. It looks OK in photoshop when I open it, but when viewed anywhere else it is brutal. I included screenshots of my colour settings and I am working to sRGB and embedding that profile when I save, so I am at a loss as to why it shifted so much.
I have selected part of a photo i wish to change the colour of using the magic wand now when i goto change colour using hue and saturation I cannot locate the exact colour that i want..
View 6 Replies View RelatedI am wanting to change the colour from the gray default but can't seem to work out how, is it possible?
Using CS2.
How do I change a colour photo to black and white? I'm embarrassed to ask this but I've spent about an hour going through everything and even looked at the help page. I bet its so simple but I just cant work it out.
View 5 Replies View Relatedhow change brushes to paint in colour. I have downloaded quite a number and the screen shots before you download them show them in colour but when you go to use them they are all grey scale.
View 3 Replies View Relatedwhy the background colour changes when I'm dwg in 3D, it goes from the normal Charcoal to light brown and then to a mauve colour ? seems to be pretty random and a bit irritating. and then is it possible to turn it off so it just stays in the charcoal colour ?
View 8 Replies View RelatedI transcribe church registers, due to the poor copies I need to change the background colour as this improves the writing for me to read and transcribe correctly. When I used PSP8 which I am unable to use now I was able to change the colour by using the dropper.
View 4 Replies View Relatedhow to change the clour of the txt
View 1 Replies View RelatedI have a black vector image on a transparent bg in eps format which I wish to change to white to put on a black bg in illustrator. The only way I know how is to change it in photoshop with color overlay but when I place it in illustrator, the edges are no longer crisp.Â
View 2 Replies View RelatedI have found macro's to change specific RGB values to different specific values within a Corel file. I have not been successful in finding a solution on applying the same sort of change across multiple files. i.e. All Corel files within a folder will search for specific RGB's that I`ve told it to change to other specific RGB's.
I know that Corel has a macro that accomplishes a batch process where it will convert files to different file types.
I've just reformatted my PC and reinstalled Xara Pro 6. I used to have it set for the light background as it's easier for my eyes. I can't remember how I did this, how to change the program background colour from dark to light?
View 9 Replies View Related