how I can open .bmp files within the Camera Raw adjustment panel when you open images from within Bridge?
I'd like to work on some old images and am pretty certain i can tweak them the way that I would like within the controls there.
OSX CS3
batch processing Camera RAW files in PS CS3 on a Mac.
I select the files in Bridge which are cropped, and the action I've created resizes to web resolution and saves as a JPG.
But when the files are processed, the images are not cropped, but full frame.
When using an external editor (PS CS5) to edit photos from Lightroom 3, there is an inital preference to select whether to use ACR in PS to process the raw file, or to use LR. I always want to do this in PS. There's often times where I'm compositing multiple photos. I only need to open up that raw file to quickly grab a section of it to move into another file. I don't want to save the raw file as a psd, tif or whatever, just select, copy and move that section of the file and then close it.
The problem is that preference setting is only when you first set up the Lightroom, I'm not seeing it anywhere on any of the preference menus. And for some reason, it has switched to processing the raw in Lightroom. So now i'm ending up with useless psd files. That takes up space on my hard drive, takes longer to archive on to external hard drives, and is slower to open the files into PS. It may seem like a small inconvenience, but when shooting 1000s, or 10000s of images a week it adds up quickly. And to get rid of them, i have to reveal in finder, then delete, then remove from catalog in LR - which just wastes time.
Mac Pro, dual quad-core, 16gb ram, GeFOrce 8800 GT 512mb graphics card
OS X Snow Leopard
LR 3.6
5d Mk II CR2 files
PS CS5 (12.0.4) and also the newest prerelease (can't disclose much on this)
LR and PS are both great in their own right, and do things better than the other in some situations, I wish Adobe would make them play nicer together.
Will there be an upgrade for Lightroom 3 or Lightroom 4 to allow direct processing of RAW files from FUJI PRO X-1 camera ?
View 1 Replies View RelatedCS3 Suite
I was doing a lot of manipulation of actions and image save functions
and never really got what I wanted completely solved but now I have this
lingering issue that I want to figure out.
When I save a TIF, it will save just fine but after the save has been
completed, it goes through what looks like an action and reduces the
file size and dimensions.
I could just go through and delete some of my actions until it stops
doing it but I'd rather figure out how I did it; this function might be
useful.
Is there a tool/script that will select the HDR triplets and automatically merge them to single output HDR files?
View 1 Replies View RelatedI shoot all my photographs at 7.1MP and would like to batch process them to a smaller size for e-mail. I have a folder with 100 7.1MP images and want to copy then resize them in a new folder keeping the image name the same. I'm hoping to resize them to 100K in size.
View 1 Replies View RelatedTakes a jpg draws a shape masks the image adds another shape . So I can batch process a ton of images. I managed to do something like what I'm after but the thing I'm having trouble with is that the original images will have different dimensions.
I have attached (via link) an example image which would be the original (start.jpg), one which would be the desired end result (done.jpg) and the .psd
IF there needs to be a step in the middle of the action where I need to intervene and resize the flat image slightly to fit the canvas it'll still save a load of time.
I know that opening and saving will be taken care of using the batch feature and the result only needs to be a jpg.
Here are the working files -
[URL]........
Is there a way to send this individual lower resolution images so he can work on them and then have him send me the metadata from his edits, so I can apply them to the images I have on my system? The reason for this question is because I'd like to minimize the size of the images I'm sending to the editor, but still be able to produce high resolution stills.
I understand there is a way to work with RAW images and save the metadata, but that doesn't fix the file size issue, and you can only save certain aspects like white balance, levels, etc... I really need a way to capture his history and save that to a file, that way if he were to use a certain filter, or brush on the image, the same results would be applied to my images.
I have a whole bunch of photos I need to batch process, but, when creating an action for this, I stumbled upon the problem that the paths I selected with the pen tool, and saved under the "Paths" tab need to be in every image for to be used in the action.
View 1 Replies View RelatedI've recently finished a catalog with 700+ images and I'd like to create an index for future use.
I would like to have an action which allows me to save a general purpose size image for e-mailing to customers as well as a thumbnail size image for photo invoices. This I could do normally by making two seperate actions for the two, but there is an issue with the categories of image types.
Within the catalog the images are of products, and thus are related to a brand. I would like to index the images into a brand based folder, and then into seperate folders for thumbnails and general use.
So essentially, the workflow would be something along the lines of
Create New Folder for Brand/ Category
Open Image
Resize for General Use
Save Image As... in Brand > General Use
Resize for Thumbnail
Save Image As... in Brand > Thumbnails
Close
Repeat for all images in category.
Create New Folder for new Brand Category
Open Image
.... Etc etc.
Also, is there a way to select a resizing of an image by it's longest/ shortest edge within an action/ droplet? I know Image Processor has this capability but it seems strange there is no ability within an action.
I have 30 dirs, each of them with 4 thumbs in it. I want to make one big thumb of every 4 smaller ones, by resizing and fitting them together into square. Like
Thumb1 right next to Thumb2
below
Thumb3 right next to Thumb4
and then save that image.
Would you give me any direction how to do that? I'm with CS3. I did explore the auto and script options in the File menu, but still unable to get idea how to do that, if possible at all
This problem is specifically related to using LR & PS to process Infrared images.I am having problems processing Infrared Images when using LR & PS. I take my IR images with a 530 IR conversion to a Canon G12 camera. I learned early on Adobe products don't play well with IR images (they come in magenta when importing ) so I bring IR images shot withmy G12 into my computer with Canon Digital Photo Professional and then work in LR & PS from there.
If I then directly open this imported image from my hard drive into Photoshop and try and do adjustments such as blue sky adjustments with a red/blue channel swap, it works fine, just as I would expect.(If you are not familiar with IR processing, I understand this introduction and question will not make sense).But when using Lightroom, I sometimes have issues. I always import all my images into LR. Even with IR images, after using DPP to bring them to my computer, I import them into LR for cataloging purposes and to make other potential adjustments. Then my usual workflow is to move photos from LR to Photoshop via the "edit in" command. This opens a dialog box giving a choice of "edit a copy with LR adjustments" which is the default option and the one I always use, or "edit original".
Here's the interesting thing I finally discovered.If I send the photo from LR to PS using the "edit a copy with Lightroom adjustments" option, I get a bad blue sky effect, where the sky is green and the foliage is pink instead of the sky being blue and the foliage yellow. But if I send it to PS using the "edit original" option, the blue sky effect works fine.So there appears to be an issue when tring to send IR images from Lightroom to Photoshop.
I cannot export images after processing in Lightroom 5 (the newest version). See the message on top.
View 2 Replies View RelatedProblem :I have a large number of ex-camera jpegs of the pages of a book,photographed at an archive where scanning is prohibited. A camera stand wasused, with the book supported on foam wedges. Consequently, both pages ineach image are distorted - i.e. each page of a pair is a trapezium.It is, of course, a simple matter to crop and apply the perspective tool(twice) to an image to restore the pages to their flat state. Doing it forseveral hundred images is a non-starter, and anyway that's what the machineis for.
Proposed solution :
Import an image to the Gimp.
Drag and drop a number of images into the same project - as many as themachine can handle.
Link the image layers.
Crop.
Select one page and use the Perspective Tool to pull the page 'square'.Repeat for the second page.
Export each image, working down the stack.
Result :Selecting the right-hand page and correcting the perspective works, in thatthe Gimp progressively works down the layers. But, although each right-handpage is correctly 'squared up', all the left-hand pages, other than the toplayer, are enlarged and cropped.
Software used :2.6 under Debian Squeeze.
2.8.2 under Mint 14.1
2.8.6 under Windows 7
All OS 64-bit.
Consistently when opening images in Photoshop CS3 the image as viewed in PS and LR 3.6 is considerably redder than in Camera Raw 4.6 and the Save-for-Web image displayed in Firefox.
I principally want my images to be suitable for print media but want then to display properly on the web.
Various screenshots attached.
My proof setup is set to the monitor icc file. Monitor is a LaCuie 321 calibrated using LaCie Blue Eye. What do I trust?
I am using photoshop cs5 extended on windows 7, Unable to load camera raw images into photoshop directly or via adobe bridge.
View 19 Replies View RelatedI've just loaded for trial Photoshop CC 64 bits but unable to open astrophotography images from my CCD camera with FITS extension as in other PS version even in adding Fitsplug file in the plug-ins directory. Is it an Apps for these files specific to Astronomy?
View 4 Replies View RelatedMy images open in 8 bit from camera raw. I want 16 bit.
View 1 Replies View Relatedwhen opening images in camera raw sometimes the image does not appear but the information does.
View 8 Replies View RelatedI recently purchased an Olympus EM1 digital camera. I have PSCS5: however I cannot open my camera raw imagesin PSCS5. Photoshop updated the camera raw to 6.1.
I understand I need version camera raw plug in 8.3 to be compatible with my Olympus EM1.what steps to take to make the program and the camera raw plug in compatible?
Even though I've been a professional photographer for over 25 years, I finally decided it was time to go digital. Little did I know how overwhelming and frustrating the learning process would be, especially for an old timer like me. Well, the 10 day return period on the digital equipment and software purchase is up, so I have no choice but to move forward in the learning process. :)
Actually, I'm excited about all the photographic possibilities that digital has to offer over film.
The first batch of photos were taken with a new Canon 40-D in Raw + JPEG. When I open my picture folder (containing those photos) in Bridge, a CR2 icon appears next to each thumbnail image that was loaded from the camera flash card. The Bridge program is part of Photoshop CS3 that I purchased, and the 40-D has the latest firmware. (If relevant, the computer is a PC using Vista Home Edition.)
Problem: When I double click on a JPEG image, I am able to load that image into Photoshop. When I double click on the CR2 icon, however, I get a message that says, "Could not complete your request because it is not the right kind of document." What am I overlooking?
Also, shouldn't a thumbnail Raw image appear along with its corresponding JPEG thumbnail when the content of the picture folder is opened in Bridge? As it stands now, I get only a CR2 icon next to the JPEG thumbnails.
Since I downloaded & installed camera raw 4.6 to deal with raw images from my Nikon D90 I have had the following problem with Photoshop cs4 (on XP + SP3). Any images I open from within bridge or Picasa or directly from windows explorer get opened in Adobe Raw 4.6. From their I have to open image to get it into photoshop. This applies to all images, jpg, gif, tiff, psd etc.I've looked at the file associations & made sure photoshop is selected & I've tried open with & browsed to the photoshop directory & selecting the photoshop.exe file but always they open with the adobe raw. How do I get this set back to default so that all regular images open in photoshop & raw images open in camera raw? Lastly I tried deleting thus ressetting my prefferances, no good.
View 16 Replies View RelatedI just got a new digital camera today (Canon Powershot Pro1). source that explains print resoultion?
My camera is 8 megapixel and I'd like to be able to print some of my images after doing some minor adjustments to the images. I have never had to print from photoshop and want the best quality possibe.
I'm trying to open RAW images in CS2. When I try to do it, an error box pops up saying that it's an unknown file type(.nef). I've even tried using the software that my camera came with, but that won't let me either.
Also, the image RAW dialog box doesn't even come up when I try to open a raw image...
I am editing in camera raw from Bridge, I edit, then save. At first the thumbnail remains the same then shortly it becomes 2 half images. Very frustrating!!! I just started this new workflow giving bridge a try and I was very excited about it .. until now! I have resaved some of the images with the same problem 600 more to go! I am using CS5
View 5 Replies View RelatedWhen I try to get my raw images off my 20D they are imported as jpegs. Since I got CC I deleted PS6?
View 3 Replies View RelatedI am using Photoshop cs5 extended on windows 7, Unable to load camera raw images into photoshop directly or via adobe bridge. I download all the Camera Raw file ready, but still not working..I open my CS 5 Extended and open with the CR2 file, it pop out "Could Not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera Raw,
I current using Canon 600D .
Windows 7 (64 bit) Q6600 Intel 2.4 Quad / 8 GB DDR2 RAM
I have a G6 Canon digital camera that I primarily shoot JPG images with, and wanted to experiment with raw images.
I took about 15 RAW images the other day with this camera and tried to open up. I went to canon and downloaded their Zoombrowser 6.0, which I can view the RAW files, but it does not edit them. I'm looking for something similar to Adobe Camera raw to hopefully view and edit them.
opening the photo. I had to remove the photo for obvious reasons.
I am unable to import raw files to E11 from my Panasonic Lumix 200. I get a response that says "nothing imported - no supportive file types" also "can't complete request as file appears to be from a camera model which is not supported by installed version of Camera raw". I think I understand that I need at least a 7.2 version and don't know what I have. The camera is a fairly recent model.
View 6 Replies View RelatedI changed Adobe Elements version (from 10 to 11) and Brand New all-in-one Dell XPS computer that comes with Windows 8 as OS (From XP SP3) ... Now my import in Adobe Organzer gets stuck. Adobe Elements sees the camera, and compares the files on my camera to the photos in Organizer and knows how may are duplicates. I then select all the photos it finds as Non-Duplicates and tell it what directory to import into and select (Finish/Import) and it just sits there. I can change anything on that screen for options, but it really is locked up. I have to use Task Manager to end the task so that I can get back into Adobe Organizer.
View 4 Replies View Related