i made a path in photoshop cs6 and want to save and load it back, but the save path is not coming any more in the path drop-down menu or right-click or double-click ...
Also i have not seen where i'd save the path to on my HD, and how to load back a path ?
AND/OR a open tab recovery cache or way to extract the images that get lost during a crash of PDN.
Number two on my list behind your fantastic new layer functionality that I had been dreaming about for three years. I NEVER close PDN. The ONLY time it closes is once every week or two when the 20, 30, 50 tabs that I have open, finally overwhelm my system. I bounce back and forth so much that there is no way to continuously save them as I make changes cause it would jack up my workflow by taking up too much time.
No way around it, this is just how I work. It would be lovely if PDN was able to, similar to After Effects, popup an error box saying it was about to crash and did 'you" want to save the session. Especially, now, with 4, as while it is a super duper version upgrade, the crashes were daily, with me, and I couldn't keep losing that much data. Sophie's choice, for me. The old layer window or daily crashes.
I created a text line in my idw template that asks for the filename and path as shown in the attach jpg. it works fine with the first idw but since we use multiple sheets in an idw (no vault here) the text line does not show up on the rest of the sheets. how can i get this to show up on every sheet in my idw?
View 1 Replies View RelatedOften when working with the brush tool a very strange bug arises.Instead of the brushstrokes being visible in a normal way, the active area around the brush becomes a large square shape, slightly brighter than its surroundings.What this means is i can t see what im painting because a large square blankets the area around which im working. very strange its like the brush is selecting vectors around it as im using it.the actual painted area then become visible again when i release the mouse.i have managed to overcome by restarting LR, but is just keeps happening after using the brush tools for a while.
View 3 Replies View RelatedWhen I save for the web, select my file type ( png,wbmp,jpeg) it displays the file type as a Gif in the lower left even though the file saves in the correct format. This is the version from the cloud download. Every file type displays this way?
View 4 Replies View RelatedMy photoshop icons are not showing up when I save the file?
View 6 Replies View RelatedIf you save a path in one image, can you open the path, not the selection, in another image?
View 2 Replies View RelatedI created a clipping path on a photo, clipping out a person's head so that I can have the person's head show up over the masthead on a cover.
But when I save the photo in Photoshop and then import it into Quark, the option where it says I can change the clipping options in Quark is greyed out.
This is what it says to possibly fix it on the Quark help page:
"You may want to choose "None" from the Clipping path pop-up menu when you save the image from Adobe Photoshop, so you can specify which path to use as the clipping path when you import the image into QuarkXPress. Or, you may want to choose a path from the Clipping path pop-up menu, so you can be sure only that path will be used to clip the image."
I don't understand what that refers to....I can't find anything like that in the Photoshop options.
My goal is to have the person's head over the text, with the rest of the photo still retained in the background. As it is now, I just get an import of the clipping path alone, with Quark substituting the background part of the photo with a white box.
I'm trying to export an animated gif with 52 frames - I'm using the timeline in CS6, it's exported correctly in the past but when I try and save for web only a seemingly arbitrary number of rames appear in the animation. With no clear route to rectify this, I've tried to affect the outcome by simply moving things around on the timeline.
I've had a variety of frame ranges (and frames) numbering between 2 and 6 frames, far off my 52 target. It's a simple image and equally simple transition to keep filesize down
I have some deifned actions in CS4. At one point I would like to save the file at a pre-defined quality. When I record that Save As part it also stores the path where to save the file to. I would like to remove that path. How can I do it?
View 6 Replies View RelatedI can't seem to get my droplet working here... using CS3 on PC. Seems like I always hit this problem and have to solve it differently each time.
Anyway, dead simple goal: Create a droplet that converts any file to a JPEG and saves it back to the original file's directory.
if I drag a .gif file from my desktop on to the droplet, it should save a .jpg file with the same name to my desktop. If I drag a file named "testfile.gif" from a folder named "Test", it should create a file named "testfile.jpg" to the "Test" folder. etc, etc.
I have recorded an Action that has a single event: Export. I created that event by using the "Save for Web & Devices" function. The event includes the various JPEG formatting info AS WELL AS a save destination ("In: C:Documents...")
I have tried to create my droplet every which way - specifically:
1) With "Save and Close" selected and "Override Action "Save As" Commands" unchecked
2) With "Save and Close" selected and "Override Action "Save As" Commands" checked
I have also deleted the droplet .exe file before changing this setting (so as to get a "fresh" version).
Nothing works. My .gif files ALWAYS end up in the directory specified in the Action.
Photoshop CS6 the " save for web" function to save on a network location. This network location isn't available to me at this time and now when I want to "save for web" I get an error like " can't perform the job, system can't find the submitted path" (which isn't the exact error but translated from the dutch error: "Kon de bewerking niet voltooien. Het Systeem kan het opgegeven pad niet vinden."
View 4 Replies View RelatedWe are using the Creative Cloud version of Illustrator CS6 and seemingly at random, Illustrator exhibits the following behaviors:
• The Illustrator Options dialog box is not displayed during a save-as operation.
• The Save or Don't Save dialog box is not displayed when closing a file.
• The Print dialog box does not appear when printing a file. (similar to the MS Office quick-print - it still sends the print but uses last settings)
As you have probably already guessed, the second behavior could be quite disastrous. This has been confirmed on four different machines, all Macs, OSX 10.8.2 with 12 - 16GB of RAM, plenty HD space, no unusual cpu activity.
I have created a basic document in illstrator CC, and when I try to 'Save for Web' the image opens in the save for web panel extremely small, although says it is 100%, and it is pixellated. I'm using a brand new MacBook pro.
View 9 Replies View RelatedAll of a sudden and out of the blue this window fails to apprear when trying to save a drawing to another location or to a different file name.
AutoCAD 2011 still has this funciton so have had to go back to using the earlier version.
I am using civil 3d 2012 when i click open and save as not show a window its show command line choose file <c:folder location like this.
View 3 Replies View RelatedWhenever I save my image I lose my text along path. It doesn't matter whether I save as xcf or export, the text path disappears. How do I save with the text along path in view? I'm using 2.8.
View 1 Replies View RelatedI have just installed AutoCAD 2006 on a new PC, and for a while everything seemed fine. However when I save a drawing it comes up with the following:
Unable to save to drawing (path and filename).
Drawing saved to (path)savAE01.tmp
It allows me to saveas without a problem.
If I come out of AutoCAD and try to open the file I attempted to save, it is visible in the file list, but a message pops up saying:
Cannot find the specified drawing file. Please verify that the file exists.
I can rename the .tmp file to a .dwg file and it opens, but then if I try to qsave it, the same thing happens.
So I deal with a lot of files each day that need to be saved according to their lead code, meaning that there is a folder that holds thousands of sub folders that have the same name as this lead code on a server.
So since I have the lead code in the file name I'm trying to use that in conjunction with the file path to tell illustrator where to save it with Javascript. Also the idea of a dynamic save path is useful.
Here's what I've got so far, it's not working yet but I feel like I'm close.
/*/////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////
Dynamic Save Path////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////*/
#target illustrator
[Code] ......
I created a circle and positioned a line segment on top of it. When I preview or save the image, the line segment doesn't appear. Here is an illustration of the problem.
View 9 Replies View RelatedFor the last few weeks everytime I'm working on a document in illustrator cs6 that includes paths, I go to save it and it freezes, I try and copy it and it freezes.
I've got an Intel Core Processor @ 2.00GHZ and 8.00GB RAM, I don't have any other program open at the same time so I don't know why this keeps happening.
I have a VBA macro that is using at some point a full path in order to get data from an Excel file. I am changing the data from the original file to the file that is localized in the full address. Now I want to use a Browse button and generate the Save As Window to capture the data directly from source file.
Is there a piece of code that open the Save As window that I need and return the full path so I can use it in my original code? I am sending a word document with a picture that shows the window that I want to call
I am saving work as jpeg into desktop file.... sometimes (not always) when I go to retrieve it ...it shows up as a file that I cannot open, not a normal jpeg. I just tried to copy and paste to show here..then draged into this space and it opened...tried to save it to desk top from here but it is still showing up as a very weid icon that will not open...? In the properties it shows as a jepeg, but the icon is totally different..
View 1 Replies View RelatedI want to open a "Save File Dialog " with some default path.Like when user run that script I want to open a "Save As" dialog box with default path "/Volumes/<shared name>/<folder name>/.. ."I am using File.SaveDialog(prompt, filter);
but it doesn't open to the location by default that I want to open.
When creating a work path on a new layer, the path is a grayish black color is there a way to create that path to be a different color, yellow for instance? Using CS6, I don't see it in preferences anywhere
View 7 Replies View RelatedI'm trying to stroke my work path with a brush I tailored myself. now, when I create a workpath from my text layer and switch to my top layer to try and choose 'stroke path' the option is shaded out.
View 10 Replies View RelatedI'm trying about 8 hours to convert a Photoshop shape in to a working path in order to put a brush border around it. I don't understand why the "stroke path with brush" is grayed out and not usable directly on the shape path itself.
"Load path from selection" is not an option because it deforms my path.
I want to be able to transpose the perspective of the existing image to my new 3D prism shape.Why can't I create a path.. and then drag nodes on that path.. and warp the pixels at the same time???
It shouldn't apply to just 3d.. because I should be able to draw a rigid path around anything and warp / stretch the image from those points.
Having made a (ex circular) closed path within a (ex square) path, I want to turn this into a selection in which the inner circle is omitted from the selection. But when choosing "Make Selection", only the first option,"New Selection" is available, the other three are grey (Add to, Subtract from and Intersect).
This used to work in CS7,
I'm wasting time having to place my image in Illustrator then manually line up the clipping path. You used to be able to save a file with a clipping path as an EPS in photoshop, select "retain vector data", place in illustrator and hit cmd Y to see the clipping path. I need the image and the clipping path in Illustrator and the image is too complex to create a mask in Illustrator. I tried to save it as an EPS but "retain vector data" is grayed out.
View 2 Replies View RelatedI have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
View 4 Replies View Related