Photoshop :: CS6 / Layer Mask Not Revealing Right Colors?
Oct 27, 2012
I am trying to take a color photograph, turn it to black and white, and reveal a flower in color and the rest is still black and white.
Â
I thought I had done this properly when I added a new "adjustment layer, hue/saturation", reduced saturization to zero, and painted the yellow flower over with black to reveal the yellow flower's color while the rest of the photo is still black and white. And it worked..except when I got to the green stem of the flower. Painting over that with black revealed a yellowish-green stem.
Â
I experimented a little more by painting black on the new layer mask and most of the rest of the color photo comes out wrong. The blue sky shows up like a weird smurf blue, faces are oddly peach/orange and most colors look much different than the originial photo. Yellow seems to be not affected, magenta/pink seems to be OK and blue shows up so-so. But the rest of the colors are messed up.
I have successfully created my first mask in Adobe Illustrator CC. The mask is a logo with a camouflage mask in the lettering. The original camouflage is the normal green, but after the masking it only display black and while. How do i display the colors of the mask (camouflage) layer?
My subject line pretty much sums up what I want to ask.
The thing is I've learned how to do both of them, but every textbook exercise I've done regarding one I found out that I can pull off with the other too.
Are they simply two different mechanisms for doing the same thing?
Level: Newbie  OS: Win7 64bit  Ia: Cs6  Once I use a Clipping Mask on a layer is the entire document covered in a mask?  And/or is all the artwork from then on inside the mask?  I've read about how to add and how to remove art from a mask. I've read about how to make and release and lots of other things.  So, then I went and found a lesson that contained the use of a Clipping Mask.  I am suppose to Select the main shape and "just" copy it and move it down (doesn't say rather to Paste in front or back but I assumed in back ~ not that it has mattered thus far)  However, while making the main shape I used Gradient Mesh and used an Offset to create a "replica" and so when I go to Select the main shape the mesh is selected and so when I Paste (in back ~ seems most logical) and then move it down the details such as the colors of the Gradient and other such things are visible in front ~ ??  So, I have been trying to abate my problem in lots of different ways.  I have tried using the Pen tool to draw behind the main shape, I've tried making a New Layer and placing it above and below and inbetween the main shape layer, I've tried adding the artwork to the Mask ... I've tried everything I can think of and I've been through many an article in the manual and FAQ's to no avail.  I suppose, what I think I need to know ... is, how ... how on earth do I draw behind this main shape? Am I not able to do it because I am not getting behind the Mask?
In Photoshop 7.0, One of my artist noticed that after making a mask or path, the background was changed to a new color. It also has effected the Full screen mode with menu bar from the tool box. The color that was selected is an ugly yellow. My question is How do I change it back?
I can do one or another, but both at the same time? It is annoying because a mask selection turns into layer selection when you select a second layer/folder.
Is there a difference between selecting your layer and clicking Add Layer Mask Icon versus having that layer selected, hold down ctrl and select Add Layer Mask Icon?
Also regarding working in Lightroom, if I modify a jpeg, select another image from filmstrip to work on and then go back to the first image for more work, are those actions degrading image even though I never physically save and close.
When I open this image in Photoshop the alpha channel / transparency hides the colour pixels underneath. Â [URL].... Â In Photoline I can create a simple layer mask based on alpha (without creating a selection first), and then turn the layer mask off to reveal the "hidden" image. Or I paint with the brush and only affect the alpha.
 In Photoshop I cannot seem to access that information. Nor can I paint or erase the transparency only. To me it seems as if Photoshop treats this transparency as something other than an alpha channel. The channel palette only shows the transparency.  how to convert that transparency to a layer mask, and retain the coloured pixel information? How do I access/reveal the "hidden" image?
I've often been annoyed by the fact that that I need to go into the layer panel each time I need to switch between editing a layer and editing it's mask. Surely there must be a way to do this with a shortcut. I found a way to disable the layer mask in the shortcut menu, but this is not something I need to do that often. Switching between layer and layer mask, however, happens all the time - at least in my workflow.
I can't figure out how I can use a text or shape layer as a mask for the layer below. See the example attached and you will know what I mean. (I created the example with simply cutting out the text outline from the white box). Â I need the text to be a mask and I need it to be editable as text. Don't know if this is possible, experimented with clipping masks but I cant make it work.
I`m trying to swich a image on a layer whit a layer mask. I whant to keep the layer mask but change the image. When I paste a copyed image it the laye it creates a hole new layer. How can I change a image but keep the layer mask?Â
Basically exactly how layer masks behave, except I would like to be able to have full non-destructive editing control over the masking layer (e.g. have it as a smart object). The problem with layer masks is that (AFAIK) only destructive editing is possible.
What I'm after is effectively the same as what a 'luma matte' does in After Effects. Is this at all possible in PS?
I could have sworn that in previous versions of Photoshop, before version CS4, that if there was a link icon between the layer thumbnail and the layer mask on that same layer, if you move one or the other, they both move. In CS4, how do you move the layer pixels and the layer mask at the same time so that they stay lined up?
I have been trying to copy a mask from one layer to a new layer in Elements 11. I can do this in CS3 by using alt and dragging to the new layer. It doesn't work in Elements 11. Is this feature unavailable in elements 11 or is there a different command? there doesn't seem to be much point in spending all that time making a complex layer amsk and then being unable to use it on another layer.
I have to give a tutorial on layer masks using both CS3 and elements at the Camera Club!
We are working with a company that will be sending us DWG files. They do not use the same layer colors as us and I am trying to find a lisp that would allow me to set up a table with the layer names and the color I want them to be so that I can quickly change all the layers to our companys color standards.
Example:
Layer 1 = Color 1 Layer 2 = Color 15 Layer 3 = Color 10 Etc.
I don't know a lot about lisp but I figure if I could find a lisp that did this I could plug in my layer/color assignments and it would work.Â
I'm trying to blend a photo with a background color. I select the new layer mask (selected), I select the gradient tool (color into transparent), and then draw a line to fade the image layer into the background later and it does nothing. Why isn't this working?
Is there a way to move a layer mask from one adjustment layer to another adjustment layer (within the same file), without removing the mask from its original layer?Â
(I can move a mask to a different layer by clicking and dragging the thumbnail, but the mask then disappears from its layer of origin). I'm using Ps CS5 on Windows XP.
I open something with paint and then I do crop and copy the area. Then I open up another document and paste it. Now I am trying to blend it in. I think I can use layers. Create a new layer, then add a layer mask. Then, at least that's how I have seen it online, I can use the brush tool to make the background reappear around the letters ( letters in my case). But this does not work. The brush only paints it in the background color.
I've set up some images with layer masks, but i'm problems pasting items on to the layers that are masked. When ever I paste, photoshop (cs3) creates a new layer. Surely there is a way to paste onto the selected layer, and not to create a new layer?
I have a black and white image I want to use this layer as a transparency/opacity mask to another layer of the same dimensions. Is it possible to import the existing black and white image as the layer mask as opposed to manually painting in the mask?
Is it possible to transfer a layer mask from one layer to another layer in PS7.0.1? I am following tutorials in Restoration & Retouching by Katrin Eismann. On p. 350 one reads: "To transfer the layer mask from the Selective Color adjustment layer to the Hue/Saturation layer, Option/Alt-drag the Selective Color adjustment layer mask into the slot of the Hue/Saturation adjustment layer." Is this something that can be done only in CS and CS2?
I've been following one of Louis Marcoux's tutorials on youtube where he animates a gradient map inside a material in the cut out or opacity option thus creating a model reveal animation in the viewport.
In that tutorial I noticed that the animation is subject per material. I was wondering if it's possible to apply an opacity (cut out) gradient ramp to multiple materials at once so that different textures and objects on the one big object (e.g. car with different parts) can be revealed together without having to apply a gradient map to each individual material used and animating each one separately?
So the goal would be to find a simple way to apply just the one gradient ramp to the whole car and animating that.
