Photoshop :: CS4 Cannot Open TIF, Exported...
Mar 14, 2009
When I try to open a TIFF file, exported from CorelDraw X4, PS gives me the following error: "Could not complete your request because of a program error".
I use Photoshop CS2 and CS4, and CorelDraw 12 and X4.
In CS2 I can open tiffs exported from CorelDraw 12 and X4 without problems.
In CS4 I can open tiffs, exported from CorelDraw 12, but cannot open those from X4.
I've tried various settings for tif export in corel - no compression, LZW compression, with & without applying ICC profile, RGB & CMYK color, etc... The result is always the same.
On other computer the things are the same, but the error message is different: "Could not complete your request because an unexpected end-of-file was encountered".
View 9 Replies
ADVERTISEMENT
Sep 18, 2013
var doc = app.activeDocument;
var destFolder = Folder ("~/Documents");
if (destFolder) {
var fileName = activeDocument.name;
var destFile = new File(destFolder + '/' + fileName);
[Code] .....
This code I created exports my current Ai document as a PSD with set options. It also names the new file what it is called in Ai.
How can I call the created file and open it directly in Photoshop? Keep in mind I would be working on multiple files, so file names would change every time I ran this Export Script.
I could call a specifically named file and open that, but that's not what I need this script to do. I just need it to open the newly created PSD file.
View 2 Replies
View Related
Mar 13, 2014
Exporting PDFs from an InDesign file, have tried X-1, X-3, Interactive. When I try to open the PDF in Acrobat, dialog pops up that says "Acrobat could not open <filename> because it is either not a supported file type or because the file has been damaged...
This isn't a PDF that's been emailed or moved between computers, this is right after I export from InDesign on my home PC.
What's going on? I need to print this document tomorrow for a final presentation!
View 2 Replies
View Related
May 10, 2012
I have recently upgraded to X6 from X3. After design work I would export the file to jpeg for client approval. I used Apple Mail 5.2 to attach the jpeg file but my problem is the client cannot open the file. It just turns out blank with a little cross. I cannot figure out what is the problem during the export process. I have no problem at all with X3.
View 9 Replies
View Related
Jan 11, 2009
I am using CS4 when I slice an image and go to File > Save For Web & Devices and I save it, it doesn't save the HTML file just the image slices.
View 4 Replies
View Related
Jul 3, 2005
Recently, whenever I "Save for Web", the resulting images appear to be tinted (i.e. the colors are not the same as they appear in Photoshop). This applies to both GIFs and JPEGs. However, when I load the saved GIF or JPEG in Photoshop, the colors look just like the original PSD. I have tried saving with "Standard Windows Color", "Uncompensated Color", "Standard Mac Color", and "Document Color Profile", but there does not appear to be any difference between any of the above when the file is viewed outside of Photoshop. I have had Photoshop for some time and I never encountered this issue before. Did I change something in my settings by mistake?
View 8 Replies
View Related
Feb 4, 2008
I am trieing to export some photos that have alpha channel to a program that only accepts JPG or TGA formats. when i used Photoshop 7 i could do it by not having to save as a copy CS3 will not let me do that.
View 1 Replies
View Related
Jul 22, 2009
I have a design in PS CS4 and want to export slices for the web. In the export preview the estimated filesize for the slice is ~200 bytes, however after the export the file size is 4kb.
I have 3-4 small background slices with gradinet and size is 1x200px so the estimated size seems to be ok.
I have alos tried to export in .png and in .gif as well. In all cases the estimation is 200-400 bytes but the result is always ~4kb.
View 1 Replies
View Related
Oct 2, 2013
PDF files exported from PS (levels included as we need them to be selectable) have corrupted text. When opening the saved pdf file, a part of text doesn't appear. It is usually starting from the second chapter of text.
View 3 Replies
View Related
Oct 4, 2012
Just got PS CS6 and Illustrator CS6 and went on to edit some pics of my cat. Only to find out that my Lightroom 3.6 doesn't seem to find PNG files exported from RAW using PS CS6.
Is this normal and I have to cough up some more for LR4?
View 3 Replies
View Related
May 19, 2012
I have an image in Photoshop (CS5, Windows 7) which I wanted to export to PDF in order to print it but then I noticed that the colors varied significantly making the result unusable.The image is composed in Adobe RGB and I'm working on a wide gamut monitor (Dell U2711) which I calibrated and profiled with a Spyder4.
In Photoshop the image contains a nice dull light brown but when I open the PSD in Illustrator or InDesign or when I export it to PDF and view it in Acrobat there is way too much red in it. Below I have attached an example of how colors look like in Photoshop (left) and the rest of the system (right):(note: this is an Adobe RGB JPEG, so viewing it on a normal gamut monitor might not show as much difference as there actually is)
I tried different profiles for my monitor (the one I created with the Spyder, the factory profile from Dell, the standard AdobeRGB profile, no profile at all etc.). While the color obviously changed a little the overall problem still persists: Photoshop shows the nice yellowish brown, all the other applications show a very reddish image. The difference is even noticeable quite extremely on my second monitor which is just a normal gamut monitor with a color range of about 73% of sRGB.I also tried exporting it to a flat JPEG with no embedded profiles which makes the result a little better but the colors are still not accurate at all.
View 30 Replies
View Related
Nov 24, 2013
Suddenly while working on may images in LR5, doing all the usual with Development module I've realised that Radial filter effect is not being exported to CS5; all others ark: healing, spotting, grad filter, and brushes are ok.
View 3 Replies
View Related
Jan 7, 2013
First - I am not an expert in the Color settings/Profiles topic but I am thinking there is an issue here.
When I look at this image "McCroreyDigitalLogo.png" in Photoshop the 'whites' appear right.Then when I import it into ms PowerPoint, the whites look yellowish.
I have done a series of 'tests' and it seems to be that the color profile out of photoshop and the one in PowerPoint are not compatible.I have reset my Photoshop preferences with no luck/change to the results.
Finally, I did a screen shot out of photoshop and pasted that into Powerpoint. The white appeared correct. Basically any files I run through PS, when they are imported into PowerPoint, the whites turn yellow.
View 7 Replies
View Related
Jan 21, 2012
When press "open" the "open"-window dosn't open. Insted it open a comandpromt by the cursor that promt me to enter full search-way and name on the file I want to open.
What can i do to get the "open"-window?
View 2 Replies
View Related
Nov 20, 2013
problem when i open DWF file (exported from Revit 2014) into Autodesk design review 2013 i cannot see the file in
View 4 Replies
View Related
Oct 1, 2012
I'm going to be building an RC airplane for a winter project. Somebody drew the pieces in AutoCAD but before I have the parts sent out to be laser cut, I want to prove out the design. Since I have limited knowledge on AutoCAD, I thought I would bring the CAD file into MAX and do a virtual build there.
I've come across a few pieces so far that need to be adjusted. I can easily tweak them in max, but when I export them back out as a dwg, they have a lot more verts in CAD than they did compared to the original CAD drawing. I am guessing this is because MAX needs them to be editable splines and CAD uses polylines, and the two are just "different".
Short of doing my virtual build in AutoCAD, what are my options? Is it possible to adjust a CAD drawing inside MAX, and keep the nice clean lines AutoCAD has when I open the exported file in CAD?
View 3 Replies
View Related
Aug 8, 2012
I have a model that contains a spring dynamic that needs to be exported as FBX. However, the FBX exporter is unable to translate the movement of the spring and converts it to a static mesh. Is there a way to "bake" the movement/animation of the spring dynamic object which FBX will be able to translate?
View 1 Replies
View Related
Apr 4, 2011
I created a simple tree using one the visor's standard trees (oakWhite).
It appears properly with colors on the screen.
When I convert it to Polygons and export as obj (including mtl files), the obj contains a black tree (see picture below).
How can I make sure to get the colors and texture attachments ?
View 3 Replies
View Related
Jun 20, 2012
When I export a section of a drawing using a viewport in paper space and the export pdf function, the text doesn't appear in the PDF. I've noticed some other layers didn't appear, but that was because they weren't set to print. The text layer is set to print, but it doesn't.
View 6 Replies
View Related
Oct 3, 2012
it looks to me that an arrow created in Illustrator CS5 and exported in a svg 1.1 file is later recognized as a stroke+triangle (two disconnected objects). It just want to make sure that I did not miss anything. The option "preserve Illustrator editing capabilities" is not checked since I want to open the svg file in Inkscape.
View 2 Replies
View Related
Jan 28, 2013
I recently had my hard drive replaced by Apple and did a clean install of my programs, no Time Machine.
I have LR 4.3 and CS5. I have always chosen the Edit in PS CS5 option from LR for editing individual RAW files. When I save my photo in PS, I save it as a jpg. Once back in LR, I would have to synchronize the folder in order to import that new jpg and it would show up alongside the original RAW file. Well now, after upgrading to 4.3, synching won't see that new photo that was created. It IS in Finder, but LR doesn't see it.
I have expanded stacks and no filters. Is there anything else I have to do?
If I use Filters/Metadata/File Type, no jpg's appear.
The only way I can see the photo is if I use the Text filter and write .jpg.
How can I get the jpg to show alongside the original RAW file again??
I'm also getting the "File must be saved as a copy"in the PS dialogue, when I save as jpg. Before, it would just save it as the file type is different.
View 3 Replies
View Related
Aug 14, 2012
sometimes I export a PNG file -lets say 1024px- but then it comes out smaller and not exactly 1024px.
p.s : DPI at 300.
View 1 Replies
View Related
Aug 8, 2012
I am trying to export a DWG as a WMF in AutoCAD LT 2008. Every time I export it, whether from model or paper space, a black border is placed around the exported image. Is there any way to get AutoCAD to stop adding this border?
I was opening it in Adobe Illustrator to delete the border and exporting as a WMF from AI. However, this last export was distorting the image i.e. in AutoCAD the distance between points A and B were equal, but in AI the distance between A and B were NOT equal. It is critical that the image is not distorted in any way.
It must be a WMF because it is being used by a piece of software my coworker is coding. The software cannot handle any other vector graphic formats. A vector graphic is necessary because the software has a zoom function.
Finally, I cannot use BetterWMF or anything similiar because I am unable to install software on my work computer.
View 3 Replies
View Related
Apr 22, 2012
I recently started using AutoCAD. I drew two floor plans for an assignment I have. Now i'm trying to export the drawing into PDF (with scale set to 1:100) so I can export it into indesign and photoshop, however when I export it a small part of the drawing is cut off. I'm not sure how to describe it, but if you look at the included files you can see what i'm talking about.
View 9 Replies
View Related
Jan 13, 2014
I would like to export my dxf flat pattern with the material thickness displayed in the corner. ie. 2mm mildsteel
Is this possible at all ?
View 6 Replies
View Related
Apr 17, 2013
I'm trying to put a GIF into a Kindle book. The GIF itself looks great, and I'm pretty darn good at formatting books if I do say so myself.
For some reason, the black in my GIF images are becoming transparent once loaded to a Kindle mobi file. Now I've used GIFs from Gimp like this before, so it doesn't really make any sense... I've not done anything (as far as I know) to make it transparent, and it's definitely not transparent in the GIF itself.
I tried changing the color of the text, but that hasn't made any difference, so I'm led to believe it's something I'm doing wrong with the text tool, but what that could be.
View 2 Replies
View Related
Oct 18, 2012
I am working on a project that requires the images I create must be at least 250 DPI, preferably 300 DPI.
When I export, I am specifying 300 DPI, but the resulting image is only 96.
Is there a setting somewhere that is causing them to revert back?
View 5 Replies
View Related
Aug 14, 2013
I am using 2014 Revit and have some problem with the exported AutoCAD layers from Revit.
My project has 3 levels and I exported the floor plans from Revit. Ground level and third level have all the elements like shown Revit, but the second floor plan doesn't show certain catagory items like columns. I already tried to create new level for the second floor plan, but the exported result is the same. I am not sure if there is any setting to control the layer visibility when it is being exported.
View 1 Replies
View Related
Feb 28, 2011
I have this .sdf-file with 5 patches of forest. When i try to export this file to a .shp-file only 3 of the 5 polygons are exported. For the export i used the bulk copy command. why only 3 polygons are exported?
I have included a .dwg with polylines of the 5 patches. The .sdf file could not be attached.
View 2 Replies
View Related
Jun 21, 2012
Why the layouts are not exported?why the layout are not exported when applying the command “Export”? why only one layout is exported?
Is there a way to export all the layouts as any part of the dwg file is exported?
View 9 Replies
View Related
Aug 23, 2013
Our GIS department is looking fo an easy way to import a CAD drawing into ArcMap without having to fool around with different scales and what not.
Currently we draft with the units set at "unitless", does this need to be change? Is there other settings that need to be set up to make the export/import easier?
View 1 Replies
View Related
