I have a Photoshop CS file in CMYK, 16 bit color per channel. When a fellow illustrator trys to open in Photoshop 7, the layers in the file are flattened.
how to get this to open in Photoshop 7 with layers intact?
Of late whenever I zoom into or out of an image PS CC flattens the image without prompting. would rather it not do this. Is this a bug or have I inadvertently set some preference that is causing this.
View 1 Replies View RelatedIs there a setting in AI CC 17 that prevents the layers from merging into 1 layer when opened in CS5? The pdf is saved as compatible with Acrobat 6 and the "Preserve Illustrator Editing Capabilities" option is selected.
The layers are intact when the .pdf is opened in Acrobat. When the pdf is opened in CS5 I get an Illustrator error that states: ".pdf was generated by a newer version of Illustrator. Would you like to import this file? Some data loss may occur.". Once opened, the layers are all flattened into one layer.
Why can I not export layers to Photoshop? I need the text editable, too. Working in a multilayered .ai.
View 20 Replies View RelatedHave some photos of a warehouse fire in Plymouth Indiana. Files were saved as .jpg Can't get them to open.
One message is "Pain't cannot read this file. This is not a valid bitmap file or it's format is not currently supported." Couldn’t display DSC-0023.jpg because a suitable graphics importer could not be found.
Carl Beason
Windows 7, Photoshop cs4
file info in Photoshop shows only an empty box yet works in bridge.
View 1 Replies View RelatedWhen I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C: drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
I first had to give the user that I was logged on with write permissions to the root of the C: drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.
Save PSD File of Social Icons to Separate PNG image files for each file
View 7 Replies View RelatedElements11: Trying to make a photo collage, but get the message : "Could not complete your request because the file was not a valid frame file". What does that mean? I follow the instructions given how to make a collage, but it comes to a halt when I try to import the pictures to the collage.
View 2 Replies View RelatedEverything I read says its version 6.4, but when I attempt to run the 6.4 patch I get the message that it does not apply? Has Adobe prevented PSE7 from opening .NEF files from the D5100 (without conversion) in an effort to force paid upgrades to the current PSE version?
View 4 Replies View RelatedI am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. try out the new features of CS6 for video editing.
I am running a 27" iMac with 12gb RAM and 1gb of Video RAM.
Getting this error when trying to use downloaded ACTIONS. "Could not place the document ‘Photoshop_Actions_03_by_ReehBR.atn’ because no parser or file format can open the file."
View 2 Replies View RelatedTrying to edit text in Photoshop CS3 file causes a crash - Tried on multiple PC's.File originally created in Photoshop CS6 with "Maximise PSD/PSB File Compatibility" set at "Always".
Document size A4, using Arial Regular. RGB. 8Bits. 72dpi
Colour Profile: sRGB IEC61966
Multi business licence for CS3 and CS6 Design Standard/Premium/Master Collection all on PC
Background info:
We got several image files every 2 weeks which should be edited and mainly reduced in size for web purpose. This work needs 1 work day for one man/woman to do, because he/she has to open the file save for web and then set the quality to a value were the file is nearly about 150-200 KB in size.
The images are different, some have few colors, some have a lot of colors and there are also different in resolution. But they should not be reduced in resolution, only in quality. All other specs of the image should be kept
Is there any possible script, plug-in or similar which can do the same (Saving with a specific max. file size) in some automatic and faster way?
I used to be able to just open any image and my copyright info would be inserted into the file data. I guess it was a droplet, "when the file is opened or created then add file info from a xmp file". I still have the xmp file with all the data in but i am unsure how to implement it being automatically opened and added to the file when i create a new one? I thought i could handle it, i assume its a droplet of some sort.
View 5 Replies View RelatedAfter I save a file for "Web & Devices," when I open it, it returns this message, "This file contains file info data which cannot be read and has been ignored." Will this cause any problem with the file once I place it in the website I'm building? I've never seen this message before on a photo I've edited. The changes I made involved color correction.
View 9 Replies View RelatedAdobe CC layers setting for exporting a Ai file to Photoshop PSD file
View 4 Replies View RelatedI'm new to photoshop. Why did some of my altered pictures not show up in the file? They appear as a blue file with PSD on it. You can see the pictures when you click on them in Photoshop elements 10 but not in your file.
View 5 Replies View RelatedWhen trying to open a raw file in PSE 5 I receive the following error message
“Could not complete your request because the file format module cannot parse the file”
I checked and my camera Nikon D3100 is listed as a supported camera.
How do I change a project file back to a normal .mov file so that I can play it on my iPad or send it to a freind. I have taken out all the bits that I dont want and woukd like to be able to play it as a normal file and not in "Photoshop"
View 1 Replies View RelatedI create short videos using the PS frame animation panel. I used to be able to FILE-export-render video- and choose MPEG-4 Video in the settings panel which would render my file into a small .mov file. Now in CS6 the new render video panel does not have that option. I tried the QT options in the export window and my file is hugh! The H.264 option gives me an .mp4. I put the .mp4 into my web page via Dreamweaver and my video does not play when uploaded into the sever. The video plays fine in Dreamweaver before I upload to the server. After I upload to the server I just get a Q and no video on my web page. If I render the same file in CS5 I am able to view it in my web page. ADOBE WHY DID YOU CHANGE YOUR EXPORT VIDEO RENDERING OPTIONS in CS6?
View 2 Replies View RelatedWe have been sending images out to contractors, and sometimes when they come back the files are having this error:
the file contains file info data which cannot be read and has been ignored
When I then try to Photoshop Script the file info it throws errors.
I did a search around, and did not find the answer. Basically I have attempted to create an action in Photoshop CS6 which will save a file in the tiff format after i crop the image. I want the file name to be the name of the image (which is supposed to change depending on name of the image) like this:
1280x720_MGXXX.tiff, where, in my case the XXX represents DIFFERENT NUMBERS.
I want to apply the action to one image at a time. Each image has a different number (name). I record the action, add the 1280x720 text to the image name in the Save dialog. I am saving the image in a different folder from the source file. The source file name is _MGXXXX.tiff (again XXXX is a number like 2220...).
When I run the action on a file, say "_MG2221.tiff" it adds the 1280x720, and saves the file. When I apply the action on the next file (_MG2222.tif), the action overwrites the existing file, 1280x720_MG2221.tif, with the image. The action always uses the name I entered in the Save dialog!! I think I was able to do this in CS4 and CS5.
I want to be able to open a file, crop and adjust it, and then save in a diff location with 1280x720 pretended to the file name.
I have been learning about Textures and I've been playing around with different ones and so I have come across a great site with lots of Texture files for download ...
[URL]......
Well, the files are small eg: 38x38 and 76x76 and how to create a larger image with these small images. Also, they are in .png format... if that matters.
From what I've read a Texture is a Pattern ... right? So, I have searched the FAQ's, the Manual etc. for things like: How to make a large Pattern, How to use a small file for a large Pattern and so forth but I can't find the right info.
Am I suppose to use them to create a Repeating Pattern? Can I do this and have them be seamless?
I am trying to find a way to save my image file as a jpeg and add -web or -print to the existing file name. This way I can easily see which files are lower resolution for web posting or high resolution for printing.
View 8 Replies View RelatedI need to redo raw editing of a file that I've invested a lot of time with, creating layer masks. Is it possible to save these layer masks and move them to a new .psd file of the same image; same size? (I'm using Ps Cs5, on Windows XP.) .
View 2 Replies View RelatedI am saving work as jpeg into desktop file.... sometimes (not always) when I go to retrieve it ...it shows up as a file that I cannot open, not a normal jpeg. I just tried to copy and paste to show here..then draged into this space and it opened...tried to save it to desk top from here but it is still showing up as a very weid icon that will not open...? In the properties it shows as a jepeg, but the icon is totally different..
View 1 Replies View RelatedHow can I import the contents of an image file into an already open file? I want to import the WHOLE image, not just a cropped version.
View 1 Replies View RelatedHow can in retain my original jpg file sizes when processing multiple file in 11 using expert mode.
View 9 Replies View RelatedHow do I reconnect a missing file when it doesn't show on the right hand side?
View 2 Replies View RelatedIn Photoshop CS6 extended,when exporting 3D file as an .obj (that has a material assigned to it), it does not create the material file - .mtl - only the .obj file is created.
Is there a setting I am missing?It works on another station, so I assume its a setting.