One of my authors is asking for a picture of a strip of film negative that looks as though it has been burned in the middle. I can get the film strip quite easily, but can I create a burned look in Photoshop? I've been through all the effects that I can find but can't work out if I can create the look I'm after... I'm working off PS7...
View 9 RepliesIn Photoshop 7.0 is there a way to burn an entire image all at once?
View 1 Replies View RelatedI'm using X5Pro, and have just rendered a project that will be about 1.6Gb including menus. Because I will need to make several disks of the result, I used the create disk image (user guide p156) option in the last panel of the authoring process, rather than burn a disk directly. What I got in the specified folder was a small .iso control file and a winzip compressed archive.
First question: why do it like that? Extraction of that archive to the same folder as the .iso file yields a Video_TS folder containing a series of .bup, .ifo and .vob files.
I ran the iso file with an iso DVD burner program I have. Generally it works on whole .iso files - one humongous file that it breaks apart into the relevant items and burns the DVD in a playable way. As, for example, Mscrosoft's SP3 package for XP - distributed by download and in that format. The burn ISO program ran and it created something like 100kb on the DVD. Something is wrong here.
Second question: Since there isn't a tutorial on how to use this function on-line, is there a document available which describes the correct procedure to create a burned DVD from the created disk image generated by X5?
want to create an effect where I have a piece of paper and I want to burn a hole through the middle. and like have the edges curling up or something with the flame coming out of the middle.
View 1 Replies View RelatedI had finished working on a b&w photo when I saw an area that needed to be burned in. However I was unable to do it, I assume because a layer or something was in the way. Is there a way to do burning or dodging sort of after the fact or should I do that very early on when I begin to edit the original photo?
View 2 Replies View Relatedhow to create a decent looking burning embers effect? Not flames.
View 8 Replies View RelatedI know there are zillions of tutorials on making burning texts and logos out there but the ones I found allways make things burn on a black (or dark) background using the wind effect.
Now, if I am right wind takes the brighter pixels and blow them into the darker ones. If you have a white background and black text the wind effect isn't working, couse it will give the effect of a burning background. The idea of using the wind effect is to make the flames come out of the text NOT go into it, right?
how to make a borning logo, text etc on a bright background? I have tried but it's not 100%.
I recently downloaded upgrade to CS6 and would like to burn a backup CD. I tried, but when I opened the backup CD I got a circle with a line through it (not allowed or available symbol) over the Photoshop icon.
View 2 Replies View RelatedCan someone tell me how I can get rid of the hard line that I get from the lasso tool when doing a burn? I have attached a pic to show what I mean.
View 4 Replies View RelatedI want to use the burn tool for a special effect but I want to do it on a new layer, I've read all about making a new layer set to overlay mode with 50% grey but this produces a different effect than when I burn the backround layer.
When using burn>highlights>15% on skin colour I get a grey kind of burn which is perfect but it destroys the pixles but when using the non-destructive method I get dark red effect which is not what im looking for.
I'm not using the burn tool in the typical sense (to darken part of the picture) I use the highlight/midtone/shadows seperate to create a very specific special effect with the burn tool.
I have taken a digital photo of a pile of bank notes, and want to make it look like they are burning.
View 1 Replies View RelatedMy artwork is in 72dpi - 1920 by 1080 for HDTV... Artwork is clear and sharp on my computer. I understand to save to a BMP or TIFF instead of a JPG... but how can I acheive that same great clarity once I transfer that artwork to a DVD (for commercial purposes..)that I also want to send and share that DVD for others to view. Example: When you see a video game cut scene, or the menu screen... (such as in "Conan" for PS3) the cut scenes STATIC SHOTS are watercolor artwork (as mine) and they are brilliant in sharpness and clarity - though when I burned just a few of mine to a dvd... they were not up to good standards as previously explained.
Is it best to save to Blu Ray Disk or... Don't think it's compression yet as I only tested 3 pieces of art on one dvd. What is the best manner possible to put my artwork onto a DVD and get that same game design quality in appearance... and not slightly fuzzed out? The TV I viewed it on is a plasma 50in 1080p or i think.
I am trying to burn photos to a CD only the pictures that I flattened and deleted in a stack only leaving the top photo says that they are audio files and they will not burn on the CD. What have I done to save them audio files...and how do I correct the problem so that I can put these pics on a CD?
View 1 Replies View RelatedHave P E 5. Wish to create and display slide shows on HDTV. Have created a show, but just learned that my version cannot burn the show to DVD. Are there other options? Does the latest version 10 have this feature?
View 4 Replies View RelatedUsing PSE 11, how do I burn pictures to a CD?
View 2 Replies View RelatedI made my first attempt with my new photo shop Elements 11 and adobe Premier, to burn a slideshow using photos and music. I was able to burn it with no difficulty but some of my photos had been turned sideways on the finished disc. They were not this way on the slideshow. How can I correct this for a reburn?
View 3 Replies View RelatedI just bought an LG DVD burner and everything appears to be working well. I can burn a data DVD with Nero and do about 4 gb in 6 minutes. So, I know it's working okay.
When I try to burn a 53 minute DVD with Adobe Premiere Elements (home videos), I encounter problems. Basically, when its encoding the data (the first step) it says the time remaining is around 4-5 hours. Does this seem right?
Also, the CPU% goes really high. I tried burning it last night before I went to bed and when I woke up I had a virtual memory error. It looked like about 75% along the way it stopped with the error.
Now, I've been searching around reading about VM, etc. and I've tried a few things:
* expanding my VM
* closing down programs in the background both manually and with msconfig (all non-windows programs) then retried it
* defragged HD
* my hard disk has 10 gb remaining so that shouldn't be an issue.
In PS CS3 I had set up something very useful on my Wacom tablet. I had two buttons mapped to two different actions. They would do the following:
1) Load tool preset for Dodge, 25px soft round, 10%, Highlights
2) Load tool preset for Burn, 25px soft round, 10%, Shadows
With PS CS4 this doesn't work because of the new "Protect Tones" checkbox. If Protect Tones is on, the tool preset will not change from "Highlights" to "Shadows" automatically. It just gets stuck on whatever it was on previously. To make matters worse, Protect Tones turns itself ON every time you switch from Dodge to Burn, even if you've saved a Tone Preset with Protect Tones turned off!
I generally do my dodging and burning with an overlay layer. When burning, I typically have opacity set between 10 and 15%, and pain with a black brush. The layer is an overlay layer with 50% gray fill.
THIS MAY HAVE BEEN HAPPENING WITH CS5, IN WHICH CASE I'M CRAZY, SO JUST TELL ME, BUT I DON'T RECALL EVER SEEING THIS..........
BUT, when I burn in CS6, instead of just darkening the area, it APPEARS I'm also getting a color shift. I've checked to make SURE my colors are white and black (black in this case), and I've tried changing the mode of the brush from normal to luminosity just to see if that would make a difference.
I am wondering if it is necessary to fill an empty soft light layer with 50% neutral grey before dodging or burning with a black or white brush? Other than making the brush strokes more visible when viewing the layer by itself does filling the layer first with 50% neutral grey do anything else? If one was to have painted the same black and white brush strokes on an empty layer set to soft light would there be any difference?
View 2 Replies View RelatedI have blended still photos, imported video AVI with it's own audio and music tracks. The work area was rendered and when I play the sections the music blends out and the video plays back as it's supposed to and even with full screen. Then I use the "Share" tab and burn a DVD using either a DVD-R or DVD+R and everything is fine except the video pieces that I want to play are silent.
View 2 Replies View RelatedI have made a slide show with narration and music. Using Photorshop 10 Organizer.
1. The sound slider has no effect. The music does not dip when there is narration on a slide. Can this be solved?
2. I cannot burn the slideshow. Trying in Photoshop (trying a CD as well as DVD) it will not burn. The CD seemed to burn, but there was nothing on the disc when it said it was completed. Trying on the DVD it put me into Premiere Elements 10. It showed the soundtrack but not the pictures. During the burn the disc came out before burning had finished. Another time it completed the burn but there was nothing on the disc. sometimes the unknown error 2131042560 was quoted.
Is there a way to enable the "protect tones" box while working in Lab Color mode for dodging and burning?
View 1 Replies View RelatedRecently I am getting an error message when the X6 starts to burn the DVD.
All procesess before ( multiplexing, VOB generation etc.) are working fine but when the DVD steps into the burn phase there is an error 5.0.0. sometimes it goes several times not. The error has been repeated at least on 3 different computers.
The X6 is working fine. On my computer I did not change anything except recorded new videos for editing.
In previous versions I created VSP files. When I came to create a disk I could add one or more VSP files in the share section and then I could click on burn and go and have a meal. The VSP files don't now seem to be any use at all in the share section. I am back to using version 12 that seems to work
View 12 Replies View RelatedI've been trying to find the right tool for this job for over a year (Premiere Elements, Cyberlink, Corel, etc.) and in some way or another, they all let me down (usually during the rendering process). I have an LG Blu-ray burner I bought a year ago (all my software is up to date with the latest device drivers). I have created one blu-ray disc, a very simple one as a test and it works, but I can't remember the software I used. This weekend I tried using VideoStudio pro X3. When I went to the Share tab and clicked create disc, it launch dvd factory 2010 (I think) and blu-ray was not a format choice. I made sure my version (although trial) was fully up to date with all the latest updates.
View 6 Replies View RelatedIs there a facility in X5 to automatically verify a DVD after burning, I have looked but cant find one. When burning DVDs for customers I use X5 to make an ISO file then burn it using Nero Express 6 as there is a verify facility that can be selected. Maybe I am being too cautious but on a few occasions I have had discs fail the verify, I feel a bit more confident if it passes the verify the DVD is ok. If I can burn with a verify afterwards in X5 this will make the job a bit easier.
View 5 Replies View RelatedI have a version of VideoStudio Pro X3 that came pre-installed on an HP computer. It tends to crash, but I can muddle thru to the point where I can save a project as a video file. Once that step is done, there is no option, not even a greyed out button, that allows me to burn a DVD. The saved file is there, just can't do anything with it. Been thru the process and the instructions several times, the option to burn disks seems to be missing. Is this some sort of trial version, maybe stripped down? The option to export to portable device is also limited to low res WMV, no MP4, 3g2, etc.
I tried to run an update, but the program comes back stating that no new updates are available.
I have been using Ulead VS 11+ for some time with great results. I recently upgraded to Corel VideoStudio Pro X3. The video capturing and editing works flawlessly however when I then want to burn the video to DVD by selecting the “share” tab and make disk it seems to start up DVD Factory which I find totally lame compared to the DVD burning associated with SV11. There seems to be no advanced functions accessible, I can’t seem to insert a photo into the back ground of the menu title, I can't create new decorations to create new back grounds for my title, I can’t burn the project to an .iso file etc. etc. In addition if you save the project and then come back to it later it does not pick up you saved project, and it does not indicate where it has saved to project. Am I missing something here. At the moment I edit in SV ProX3 and burn in VS11.
View 6 Replies View RelatedAm having problems burning blu-ray files generated from VSX5. I get no errors but when I play the disc the player says"unable to play disc" . On windows Media player it wont recognize the chapter list on the disc.
View 4 Replies View RelatedI have VideoStudio X4 pro, think the sales man did a great job as i'm a beginner and man o man this isn't what i thought it woud be I'm trying to save my pictures to cd, it burns in and when i go to play it on the video, it won't work, just comes up black? Have slected create disk image, have used the cd-r before to do a similar thing and it won't work.
View 3 Replies View Related