I have an i7 3770k, TWO AMD HD 7970s, 16 GB of 1866mhz ram and I'm on Windows 7 64 bit.
Why does Photoshop run (much) worse when I enable GPU acceleration? Do they do this on purpose so they can sell their "professional" graphics cards where the only difference is the driver is more "optimized" for programs like CAD and Phoshop?
I'm using Illustrator CS6, and want to scale an object that has a brush applied to it without scaling the line weights in the brush. I've been able to somewhat do that by Expanding the object with the brush applied, but then of course it no longer has a brush applied to the object. Is it possible to scale an object without changing the stroke weights in the brush?
This is what I have now when I scale, the line weight of the brush scales when I scale the line weight of the line the brush is applied to:
What I want is to be able to scale the line weight of the line the brush is applied to, but not the line weight of the brush itself.
I am working with CS6 windows. I am having a problem when I made a brush, and add additional strokes to the same line.
Here is a pic of what is happening. You can see at the beginning of the arrow, there is a blue and pink link showing around the beginning of the arrow head. I added the pink and blue lines to the same line as the brush using the appearance tab.
Now if I add a dash to the the pink and blue lines, this is what happens... There is a little pink and blue line at the very tip of the arrow head. My dash options use for both the pink and blue lines.
My question is how to I get rid of this little line? What I am trying to do is.. use the black arrowhead on line with a stoke of 1 point black, and then under that have a 3 point stroke of white. In the image what is blue would be white, and what is pink would be black, and the arrowhead is correct as it is now. I had this same setup in CS4, and did not have that little line at the beginning.
here is my brush settings..
I get this message when I try to open cr2 images in bridge
Camera raw is not enabled. Camera raw requires that a qualifying product has been launched at least once to enable this feature.
I also noticed that the thumnail previews are not sharp even though I have sharpening set in the preferences.
There's a very long list that I have to sift through everytime I use the Text tool. I have deactivated a ton of fonts in font book. Is there somewhere else to delete or turn off fonts? I don't want to delete fonts the system needs, but I don't want them showing up in the list, either.
View 2 Replies View RelatedI have having a weird problem with Photoshop CS4. First of all, let me give off the specs.
OS: Windows 7 64 bit
Graphics Card: AMD Radeon HD 7570 (Driver Version 8.960.11.1000, with latest Catalyst Control Center)
I use Photoshop CS4 for freelance work, and one of the tools I like to use is the Rotate tool. When I first got my desktop and installed Photoshop, everything worked fine. However, recently I was forced to perform and factory restore on my desktop due to a virus.
Today I started working on something and when I tried using the Rotate tool, it was not working (I go that error window saying it wasn't enabled). I checked the OpenGL settings to see it was enabled. Confused, I restarted Photoshop and tried again with no luck.
This turned into a search around the internet to see just what is going on, but the only thing I could find was suggesting updating drivers for my graphics card and Adobe, which I have tried with no success. I have found out that some people were having the same trouble as me, but what makes my case odd is that it was working fine before the factory restore.
I have some how enabled the grid function (control h) on EVERY image I open. I have to disbale the grid manually for each photo by pressing control H. It is listed under "extras" as well. Please help me disable this permanentely so I don't have to do it every time.
View 3 Replies View RelatedI'm tying to see if the 3D features in Photoshop Creative Cloud do what I want to do but they are not enabled. Below is my computer specs. It has 2GB on the GPU so it should work.
Adobe Photoshop Version: 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00) x64
Operating System: Mac OS 10.8.4
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3400 MHz
[code]....
In which cases I can see layer>matting>color decontaminate option enabled?
View 2 Replies View RelatedI purchased a logo and business card design from a designer but one of the colors is the wrong shade of blue. Is there a way to change the one color throughout the file if the file doesn't have layers enabled? I'm a novice PS user but am unable to get in touch with designer to get revised files so was hoping there is a way I can do this myself.
View 1 Replies View RelatedI have a creative cloud subscription and have photoshop installed but for some reason, my 3d features aren't enabled. Is this something to do with my creative cloud account is the student based one?
View 1 Replies View RelatedI have Photoshop CS5 Extended (x64), and I have enabled OpenGL in the preferences, AND I've checked that my Graphics card is supported, AND I've updated my drivers....
I can't, for the life of me, get Repousse to work!!I'm trying to extrude a logo I've created.... BUT I've also tried to repousse a text layer and a Shape layer, just to test it... and NOTHING.
I have purchased the following books: Photshop CS4 The Missing Manual, Real World Photoshop CS4 for Photographers, Real World Camera Raw with Adobe Photoshop CS4, I keep getting this message:Suite Color Management is not enabled,
View 7 Replies View RelatedI am interested in grouping and sorting brushes according to size, shape, whatever.
Right now when I add a brush library, they just stack on top of one another.
For example let's say I have a round brush with a 10 diameter, then next to it a round brush with a 20 diameter. If I make a 15, it goes to the bottom of the list, and I have to scroll all around. How can I group them?
I suspect I would have to make my own brush library with my brushes how I want them, then save that and load it?
Basically, when I go to view the layer mask by holding alt and clicking on the layer mask it doesn't function. Along with this problem, when I go to toggle my adjustment layers on and off, by holding alt and clicking on the eye symbol next to the background layer... again this doesn't work.
Im not sure if I have accidently clicked on something that has disabled these functions or its just a bug.
I've downloaded some of adobe cs6 programs such as photoshop, dreamweaver, illustrator, and flash, But when I was going to begain a new download I found that there is an ( English - Arabic enabled ) option that I unfortunately hadn't enabled in the previous downloads -
Is that the reason I can't write arabic properely in photoshop ? - and instead choosing it I chose ( English ) and unfortunately I need arabic beside english to be enabled and written properley as I am egyptian. So , Is there any solution, option, or language patch that changes it to arabic enabled instead of english and re downloading again ? and what is the difference between the two versions, is it language only ?
When i go to Edit > Creative Suite Colour Settings in Adobe Bridge, I am receiving the following error: "Suite Colour Management is not enabled. Suite Colour Management requires that a qualifying product has been launched at least once to enable this feature.
Then I searched this issue in Google and I got a solution from the link [URL]...I did all instructions one by one but my issue still not resolved. i purchased this license very recently From Al suwaidi computers
I have Adobe Photoshop CS6 (part of Master Collection English-Arabic Enabled) installed on MacBook Pro with Mac OS X Mountain LionI went to Preferences -> Type -> chose Middle East , to enable arabic typing but whenever I choose the Text tool, photoshop freezes, and cpu use reaches 130% ( on Activity Monitor it showed that photoshop using 60% of cpu while "fontd" is up to 70%)I don't know why font daemon is consuming that much of cpu, probably facing problems with building fonts models, I left it for half an hour, but no use.
the corresponding windows version, did not freeze, instead just went alittle quirky heavy for half a minute then back to normal and i was able to use text tool and type in arabic normally
I have been trying to burn a Blu Ray project. It is a 108 minute compilation of HD material that I assembled over the last year and am scheduled to show it Christmas Eve for my family. The project burns fine to a Blu Ray disk and plays back fine however for some reason, it will only burn in stereo and not Dolby 5.1. I have 5.1 sound enabled in the settings and when I burn the disk it is also the audio format I have chosen. I have burned two disks with the same results. I burned a test Blu Ray of this project back in November and it was encoded correctly in 5.1.
View 5 Replies View RelatedWhen plotting to an Oce device with enabled accounting: the accounting dialog window pops up for each sheet of the print job when several sheets are chosen.
View 1 Replies View RelatedI've been using Autocad 2014 for several months now, and I've noticed that every couple days or so it turns off my autosave. I can check the box to enable it, and set it to 10 minutes, and a couple days later it will be unchecked and say 0 minutes in the box. I don't know how often it happens, I know it takes more than one day, but it's really annoying and one of those things I usually only find AFTER I have a drawing crash on me.
Is this some kind of software or profile issue?
I have a very simple dynamic block that works when I test it in the editor but refuses to work when inserted into a drawing. I am not a newbie to dynamic block creation/editing, but it has been a long time since I have had to create one and this has got me stumped.
Is it possible that my employer has somehow blocked the use of dynamic blocks in drawings?
I can see the sync settings button but is not enabled how do I sync it?
View 1 Replies View RelatedI'm on the release version LR 4.1
It's typically very stable, but when I enable the Secondary Display, it starts crashing every 10 - 15 mintues.
Win7x64
12GB RAM
ATI Catalyst 12.4 (was the same under 12.1)
Internal 256GB SSD w/ OS and catalogs
External 5.5TB eSata w/ RAW files
Canon 5d2 & 5d3 files
2x Dell U3011 displays
I've googled and searched the forums. Lots comes up about older versions, but I'm not finding anything about the current release version. Windows offers to check for a solution online and close the application.
Crash Info
Problem signature:
Problem Event Name: APPCRASH
Application Name: lightroom.exe
Application Version: 4.1.0.11
Application Timestamp: 4fb2266f
[Code] .......
I have global illumination enabled in Cinema 4D but it not showing up in AE CC.
View 7 Replies View RelatedI was editing a video an while playing with the scale I went to RAM preview and it wouldn't work so I closed it down and reopened it as this problem has happened a few times and this has been the fix. I then went to RAM preview from the beggining and my computer crashed, no bluescreen the monitors just went blank and the BIOS popped up. I then reopened my project and RAM previewed from the beggining and it didn't start it just said requesting frame 2 of ... I then played with a few of the prefrences eg. clearing the cache and purging memory and It still didn't work. I then disabled multiprocessing and RAM previewing worked again though I would like multiprocessing to work as It is alot faster. I then tried restarting my computer and reinstalling AE but still no luck.Also rendering does not work either with multiprocessing enabled.
Specs: i7 4770k @ 4.4Ghz
G.skill Ripjawz Z 32GB @ 2133Mhz
GTX 780
Samsung 840 pro SSD
Seagate Barracuda 2TB HD
A week ago AE was running fine, but in the last few days, I must have enabled or did something to chop its performance by 75%.
Also, while rendering, my ENTIRE computer is super laggy, just typing this text right now, for example, is laggy. I used to ALWAYS hit render, and then browse the web, watch videos, etc... but now it's unbearable. Also, it isn't just when i do a final render. It also occurs when I skip to a single frame in the comp and it tries to render it(goes really slow)
how to turn this feature on? We recently upgraded from Inventor 2011 to 2014 and now this feature has been disabled. The attachment shows that visibility has been greyed out.
View 2 Replies View RelatedI work for a large enterprise that has many machines(all the same) that have Inventor 2010 with the 3GB switch enabled. However, when a user tries to remotely connect the machine with the switch enabled, using Windows RDC, they are unable to. After removing the switch, the user is able to remote successfully. Other forums suggested that the "SessionImageSpace" in the registry needed to be edited to allow for the connection, but that did not work for me.
Machine Info:
Dell T3500 Workstation
Xeon Quad Core 2.8GHz
6GB RAM
NVidia Quadro FX4800 2GB
Windows XP SP3
We use Maya 2008 and 2009 here, along with Turtle 5.1. Our exporter plugin only works with 32-bit Maya, so we are a bit tied to that as well. We are using Turtle to perform shadow and AO bakes for our game, but Turtle fails unpredictably when baking large (>4096) textures. Many times I see:
// Error: Error during baking, see script editor for details! //
Of course, even with "Echo Every Command" enabled in the Script Viewer, and every output option enabled in Turtle, I get no actual error message. On a 16318x16314 bake, it completes 75% of the bake, then does nothing for the remaining 25% (while updating the progress bar) and exiting with the above message. On 8K bakes, it will seemingly finish the bake, but not write out the texture. Sometimes, Maya will crash completely, either with the usual error dialog, or just silently close without any message whatsoever.
In my experience, running out of memory on a 32-bit program can have similar results, and it is possible that 32-bit Maya even running on 64-bit Windows 7 has the same issues, but Task Manager shows only 1.5 GB used by the Maya process at the time of failure, far below the ~2 GB addressing limit for 32-bit programs.
There is an issue with footage that needed the YUV headroom to be turned on when importing.What happens is that when this footage is exported, it get crushed blacks. So there need to be a YUV headroom setting for the export I believe. Maybe I am seeing it wrong.
Footage is MXF Panasonic HPX171 (DVCPRO HD 72025PN) footage.
