I created an action that works great, but when I batch automate from Bridge, the action gets stuck on the last steps - save. I get the JPG Options box and have to manually click yes to save. From Bridge, I got to Photoshop > Batch and I've tried different combinations of Destination and Save As. I want to save to the same file name.
View 8 Replies needs to overlay a grid over a photo and then save it as another file. In CS5.5 or earlier, no problem, but in CS6 it is not working for either of us.
The batch action (run from either Photoshop or Bridge) stops and prompts at the Save command every time no matter what format we save it in (psd, png, jpg, save for web, etc.).
I have been through the Web and the Adobe Forums and cannot find a work around for this. He cannot just hit enter everytime the popup window comes up because he has over 2700 photos to put this grid on.
I've created an action that uses the save for web dialogue to optimise images for the web. When I use the batch command to process a full folder of images, even though I have "Override action "save as" command" checked, it ignores this and still uses the location that was used when the action was created.
Apparently this is a known issue in CS6 and previous versions but whether this has been fixed in Photoshop CC?
I have created an action where I do some stuff with the picture and then I save the file to a shared network drive while using the "Save for Web" function. While recording the action everything works fine but when I run the action I got a error that Photoshop can't save the file because the Path does not exist / Is unavailable. It is stuck while he want's to run the "Save for Web" part of the action.
I tried the mapped path (Z:files...) and the UNC path (\fileservusersdjametfiles...) but both did not work.I am using Photoshop CS5 and Windows 7 Professional (64Bit).
I'm trying to make an action that would perform some operations on images and save them to two different folders (as PDF and as JPG). Here's what my action looks like:
I make a droplet out of this action, and run it on a directory with a bunch of jpg files. However, all files are saved the same two locations: "archivepages_c.pdf" and "archivejpeg600pages_c.jpg".
I have a question about actions.
When I create an Action that involves File, Save As.. it hardcodes the directory name I was using during recording. I want it to use the same directory as the open document. Is there a way to do this?
I.e., when I record the action on the file /path1/xyz.psd, and then try to run it on /path2/abc.psd, it will save the document abc.psd in /path1 rather than /path2.
when I use the 'Save for web' option, choose 'gif 128 Dithering' and click on the save-button, PS wants to save an html-file (like slices in Imageready).
When this occurs I have to rename the file-extension into gif and choose 'pictures only'.
This sometimes becomes a problem with actions and batch-processing.
For example: I've made a simple action which resizes all pics to 180 pixels and saves them as gif for web. This action stops, when the 'save for web' option wants to save the file as html.
I want the gifs to have the same name as the original file, so I can't just name them pic001, pic002 and so on.
Has this something to do with the original files being bmp's?
Im trying to record a SAVE action.
After I have done my adjustments to an image, I usually click the X
Working from Lightroom in PS - trying to record action to simply flatten layers and File Save back to Lightroom. PS records specific file path of original image used when action was recorded. Is there a way to eliminate this specific path?
View 1 Replies View RelatedIs it possible to insert a "stop" in the action for save for the web, just before actual save. Basically i want to be able to name my file manually (use distinctive names), but just to automate the picture size option and quality (which don't change). I know that i can write an action for an image resize and than save it with my desired file name, but i was wondering if i can do it all in "one shot" without the altering of original image.
View 1 Replies View RelatedI've got Photoshop CS4 and have created an action. However, for the life of me, I can't figure out how to save the action to a file so I can share it with others. The action converts a PSD to JPG and exports it for the web. How do you save an action so you can share it? I don't want to share all of my actions -- just this one.
View 1 Replies View RelatedI am trying to create an action that will, take the photo i am working with, change from 16 Bit to 8 Bit, and then save as a jpeg in the folder that the RAW file is saved. I have tried to set it up but i cannot figure out how to make the photos save in the right folder. i.e they always save to the folder that was used during the recording of the action.
View 2 Replies View RelatedUsing PS7 I need to make an action that allows me to type in a different name each time when saving a file. ... this is basic but I just can't seem to get it.
More detail is... I have a .psd file that gets changed and then saved from 5 to 15 different ways to another computer on a network. The problem is being able to save the file as a number from "500" to "1299." Is there another way to do this without having an action for each number?
Every time I make minor adjustments to a photo in Camera Raw within Adobe Bridge, it saves the edits in a DW (Dreamweaver) file next to that photograph. I have not changed any settings recently and don't know why it would start doing that all of a sudden.
When I delete that DW file, all of the edits to that photo disappear and it reverts back to the original. Every time I click on the DW file, it takes me to Dreamweaver and opens a window with a whole bunch of code. How can I go back to having everything I do in Camera Raw save to/into the photo itself?
Using bridge to organize 150 images. Does it save an image order? I clicked the build and export cache option last night before leaving it, but this am it's reverted back to the order it wants to be in, which is the order it is in finder.
View 2 Replies View RelatedI made an action that does a bunch of stuff, and then saves as to a folder. How do I change the save to destination within the action? Every so often I need to save to a new location.
View 2 Replies View RelatedI'd like to save certain action attributes as text to archive along with adjustment files for archived image group adjustments. how to copy this to clipboard as text?
View 8 Replies View RelatedMy Problem in Photoshop CS5: Action is not running automatically while I trying to save PDF to JPG, in the batch process:
Followed following steps:
Opened PDF fileCreated new auction (F2)Flatten imageSave as JPGClose fileTo Run Batch:
Opened Batch dialogue boxSelected set/action nameSource: selected as “Folder”Directed location using “Choose” buttonAnd no selected any check boxes under the “Choose” buttonClicked “OK” Now all the PDFs are opened one after another but not execute the selected action.
This wasn't happening before, but now, every time I use a 'save' action, "copy" is inserted after the filename even if no other image with the same filename/extension is in the folder.
I don't know how to attach an image of my action, but would be happy to send a jpg via email if any one wishes.
I have some deifned actions in CS4. At one point I would like to save the file at a pre-defined quality. When I record that Save As part it also stores the path where to save the file to. I would like to remove that path. How can I do it?
View 6 Replies View Relatedi create an action with a save for web command, i change the image size to 400x400 pixels. But when i run the action on a larger or smaller image the image size will change proportionatly. Not 400x400pixels. If i add to the action before i save for web to resize the image through the menu commands i end up with lost resolution.
View 13 Replies View Relatedway to save a file in a certain format through an action?
Like I want an image to be always saved in tiff when I run an action.
I just re-built my PC with Vista x64 and re-installed PS CS3 from scratch upgrading to 10.0.1 from the auto update. I need this for LR2 to integrate.
Since the re-build (I was on XP x64 previously) one of my actions which includes a 'Save As', which saves the image to a specified directory and as a JPG (not the directory the image opens from), is unexpectedly displaying the 'save as' dialog, waiting for manual input. This opens on the source image directory, suggesting it's ignored the suggested destination path, and it suggests the PSD file type rather than JPG as suggested in the action. It seems to be looking for input simply because it thinks I'm trying to overwrite the original image file.
In the menu under File there is a command "Close and Go to Bridge" Is there a way to do something similar for returning to Lightroom after a "Save"?
View 1 Replies View RelatedI am trying to resize one image to 4 different sizes. So far I have an action created to do all of this, with only one minor problem. Whenever it saves the images, they are always saved as the wrong file name. I was wondering if there would be a way to keep the original file name, but then add a suffix to it- all within the action.
If it's not possible to automatically add a suffix, how do I keep the original file name when it's saving within the action?
I found an older post (URL...) that was very similar to what I'm trying to accomplish, but the question was never fully resolved.
Basically, my action processes a picture in different ways and saves each version in different folders within a main folder on the desktop. The action works fine but as soon as I rename or delete the main folder, the change is reflected in the action which forces me to re-record the "save as" parts of it. I would like to use the same folder structure since I have duplicates of it.
Is it something new in PS CC or specific to the Mac OS (Maverick)?
I've run into the Photoshop CS5 bug whereby an action with save-as truncates the filename (and adds " copy").
For the original bug, see for example:
[URL]......
I have created an action script where I change the color of the objects in a photo and then have the action automatically save for web as a PNG-24 image. My issue is that the save for web continually overwrites the existing file at that location. Is there anyway to prevent this from happening?
View 7 Replies View RelatedI have Photoshop CS6 and I'd like to know how to create an action to save multiple photos in a batch command. I've been searching the Web, but I haven't been able to locate anything useful on this (except one article for CS5). Seems a bit odd. Anyway, I already know how to create an action, but what I'm stuck on is having the action pause and open a dialogue box so I can do things like name a photo, choose the size I want in the Save for Web dialogue, etc.
View 5 Replies View RelatedThere is still an issue with making new actions that include saving for web. While recording the action, save for web functions as it should. But once the action is played, regardless of the original format the saved image should be, it gives it an html filename extension.
[URL]
I have spoken about this bug with a friend that is a computer programmer. Considering that the action is saving the file correctly, and it's only the name that is not saving properly indicates that this is a superficial error, and not an issue that would require rewriting the code completely. Also consider that this WAS functioning properly in CS5, and that this is a very easily reproducible bug.
We do hundreds of images for our main client for print purposes. As part of the work, they want all of the final images run through Save for Web saved as both a .jpg and .png file at 1000 pixels wide.
The problem is, if you try to create an action for this, the size the action saves is a percentage and not a pixel width. So it's impossible (so it seems) to save an action that sets the scale as a proportional resize with a fixed output of 1000 pixels wide. Since all of the images vary in size and it insists on saving the size as a percentage, you can't create an action that will work.
I've tried to see if there's a way to modify the action to change the output to a pixel width, but can't see how to do it. Is this even possible? It would save us TONS of work not having to manually open each image twice and saving for each format.