I need to access Photoshop CS 5.5 running under Windows 7 remotely. I have Go To My PC and is works, but is there a solution that is better and faster?
Second, is the PC from which I access Photoshop relevant to performance – assuming I stick with Go To My PC?
Im trying to install PS CS5 on my Macbook Pro remotely from iMac, 59% complete it asks for disc 2, put disc 2 into iMac and it will not continue installation, just says 'insert disc 2' to continue
View 2 Replies View RelatedI had Photoshop CS5 installed on my laptop. The hard drive recently crashed and had to be replaced. Because it crashed suddenly, I was unable to deactivate the install. Is there any way to remotely deactivate it so I can install it on the new hard drive? I have a Student copy so it can only be activated on one computer at a time.
View 3 Replies View RelatedHow to make an iLogic routine run from a completely different document than the one it's in? I have tried everything from remotely changing properties to even editing a sketch in the model to try an trigger a routine. Nothing works. I have set triggers to fire when the part opens but opening the documents with code doesn't fire those triggers. It’s very frustrating to have to open each part in an assembly manually just to get all the routines to run.
Note I'm using 2012.
Is there any way to close a drawing that is open on another user's computer, from my computer?
We have a problem with engineers opening a drawing, printing and marking up that drawing, then taking the print to a drafter to make changes to the drawing, but failing to close the electronic drawing file.
Normally, we just call the engineer and ask them to close the drawing. If they were away from their desk, we could just walk over and close the drawing ourselves. Now that's not possible. We have a new security protocol which locks the user's computer after ten minutes of non-use. We each create our own password which we're not supposed to share with others. I just want to be able to log into the server and close a drawing that someone else has open.
I have a Nikon D4 with a WT-5 wireless transmiter and lightroom 3.6. When I follow the steps to make it work, lightroom cannot detect the camera, but the camera does seem to recognize lightroom.
View 4 Replies View RelatedI want to setup my camera, Nikon D5100, for pole aerial photography. I want to have the ability to connect my laptop to the camera up on the pole so I can adjust zoom, etc.
Can I achieve this with Lightroom?
I understand how Smart Previews work. What I'm unsure of is...will we be able to edit these files remotely, separate from the host computer? For example, I'm an image editor and I live 500 miles away from the photographer that I work for. Can they (the photographer) download the images after shooting, create Smart Previews then send me the 'Smart Preview' folder of images, I edited them on my own computer then return the Smart Previews back to them fully edited?
View 3 Replies View RelatedIf I build a subassembly in subassembly composer is it possible to deploy it in my company without having each user import it?
View 1 Replies View RelatedI just installed CS6 upgrade. I always started Bridge from CS5 menu bar at the top. There is no Bridge button/icon to start Bridge from the top menu. I have to access it through the file menu. Is there a problem or am I missing an option or preference setting? In CS4 & 5 it was always on the top menu bar?
View 5 Replies View RelatedOut of the blue CS3 extended is crashing when I try to access the preferences/performance menu.
I've reset the preferences during startup which did absolutely nothing. It still crashed.
Running windows Vista w 2 gig of ram.
When I go to save my document, the Notes check box is grayed, no matter what I check or uncheck, and no matter what type of file I select it to be saved as, so I can't create any annotations.
View 1 Replies View RelatedI have Photoshop 7 and Win XP, but am not very experienced in PS. I just downloaded the Bickham Script Pro from Adobe . In Photoshop, I did some type in the regular characters, but I cannot find how to access the alternate characters for this font. The dropdown next to the right of the font box says "regular" and there are no other options to select.
View 5 Replies View RelatedAccidntly hit view hidden files. Tried view all files. Can not access my files. Got message "this file and other files are locked. How do I get my files back? Are the pemamently gone?
View 3 Replies View RelatedI have not used PSE in 2 years; when I open it, no new pictures have been added. At the bottom of the welcome page it indicates it is accessing customer info, but this has been going on for 18 hours and nothing new is added. I have rebooted twice.
View 2 Replies View RelatedI love lighting effects and need it for a rush job, but it is greyed out. I am in RGB mode 8 bits. I have tried flattening, layers and no matter what I still cannot access it.
View 6 Replies View RelatedThe company I work for has security measures in place which prevent me from modifying any directory within the C: drive. This means, of course, that I can't add fonts to either the system fonts directory or the Adobe/Fonts directory.
Obviously, this is a huge disadvantage, and I'm trying to find a workaround. Any way to make Photoshop find fonts in a different directory? I'm able to create and modify directories on our shared server, so I'd like to create an alternate fonts folder there and point Photoshop toward it.
(I'm using CS4 on a Windows XP 5.1 . I'm a Mac guy at home, so I don't know much about Windows.)
I'm experiencing a very bizarre problem in CS with a font special character. I used Extensis Suitcase to examine all the font characters for a particular font that I'm using on a project. The character mapping shows the key combination for the character I want is (on a Mac) Option/Alt + Z.
This works in every other application on my computer, including my email application, but for some reason, within CS it brings up the Omega character. Any idea why this happens and how I change it? I even tried to type the character in Word and cut and paste it into Photoshop and it changes! What gives?
Accessing metadata in Photoshop CS6 extended (file info) for any file, raw or .psd., causes application to freeze. I must force quit the application to continue. Application is running on OSX Lion.
View 7 Replies View RelatedI am unable to choose anything in Preferences in Adobe Elements 9 Organizer in Elements 9.0.3. Every time I try the program crashes. I have checked for updates and cannot find any and have even gone so far as to uninstall and re-install the software - no luck.I am using OSX 10.9.2. Preferences works fine in Photoshop Elements just not in Organizer?
View 8 Replies View RelatedSeveral months go I installed Photoshop Element 11/ Premier Elements. Both worked fine. Now in Elements I cannot access the Quick or Guided Editing space whereas before I could. Can only access the Expert Space now. Did not fool with any of the settings.
View 5 Replies View RelatedI keep receiving the error "Could not complete your request because of a program error" when trying to access Blending Options for a custom graphic or font. It's completely inaccessible. It used to work just fine.
The only other time I've seen this error is when running an action.
CS5.1 (64) Extended, Updated WIN7 64 bit, AMD Radeon HD 6800 Series Graphics Card, AMD FX (tm) 6100 Six Core 3.30GHz, 8GB RAM
I have successfully carried out a trial back up of an Elements 6 2000 picture catalog from an XP based PC, using the Elements 6 full back-up process. This process is intended to be used eventually to transfer this and other catalogs onto a new Windows 8 PC installed with Elements 11.
However, in the interim I would also like to be able to access the picture files and the catalog data on the ehd from a Vista based laptop which also has Elements 6 installed. How to do this without carrying out a full restore process that would load all of the files onto my laptop's hard drive.
In transferring the picture files to the end I also seem to have lost the original file structure that was on my PC, as folders have been renamed numerically and are all held individually in the main folder of the end. Whilst this doesn't matter too much whilst the files remain on the end, provided the catalog still know
Stats first... 2010 iMac quad core i5, 16 gigs RAM, OS X 10.6.8
I can only hope that there is some simple setting that I'm just not aware of.
I've been trying very hard to understand why CS6 (now 64bit) is acting more sluggish than CS5. If I start an intensive task like a detailed Image Trace for instance, I will monitor both CPU usage and memory usage. Apparently Illustrator cannot mult-thread as it only uses one core out of a quad core processor at any given time. So use of modern CPUs is not yet an Illustrator feature it seems?
When I monitor memory usage (with Apple's own Activity Monitor and also iStat menus) as I'm watching a slow progress bar, Illustrator is calling on only between 1 and 2 gigs of RAM, never more than that, and leaving somewhere in the area of 11-12 gigs of RAM free. Why is that?
Bottom line I've seen no change from 32bit to 64bit except that CS6 seems a tad more sluggish. Even to the point of seeing a short progress bar during most saves on files that I'm quite sure weren't calling up progress bars in CS5.
Am I able to access and read and write to the file holding the variables used in the parameters-manager's palette. Ideally, I want to read the value held for an action-parameter, do some math using C, and write the result back to the file as a user-parameter which may be seen in the parameters-manager's palette.
View 2 Replies View RelatedI have recently purchased and installed Nik collection. I have no problem reaching the plug-ins in Photoshopbut can't in Lightroom (except for HDR)
View 8 Replies View RelatedHow do i access Lightroom 5 from a second computer?
View 1 Replies View RelatedI'm trying to write a plug-in that involves operations with TIN surfaces. I tried to follow the example from the Developer's guide just to see if I could get accessing a TIN surface to work, but without success, and now I'm stumped.
Here's my code, which is supposed prompt the user to pick a surface, and then simply spit out the name of the surface that was selected:
Imports System
Imports Autodesk.AutoCAD.Runtime
Imports Autodesk.AutoCAD.ApplicationServices
Imports Autodesk.AutoCAD.DatabaseServices
Imports Autodesk.AutoCAD.Geometry
Imports Autodesk.AutoCAD.EditorInput
[code]....
The plug-in is loading just fine and the initial prompt comes up, but whenever I actually select a surface after being prompted, I get a fatal error that causes AutoCAD to close.
I am trying to have access to the property Custom scale of the Viewport object and trigger a piece of code as soon as I pick the Viewport and change the zoom / Custom scale property.
View 2 Replies View RelatedI'm having a problem accessing data manager tables in the 2011 version. My C# .NET code worked fine with 2010. Here is a sample of the 2010 code that works, but returns zero length tables in 2011.
C#
ProjectPartCollection oPP = PlantApplication.CurrentProject.ProjectParts;
PlantProject oPProj = PlantApplication.CurrentProject;
Project oProj = oPP["PnId"];
try
{
//get ACAD data table
[code].......
The last two lines fail to object any meaningful data in 2011. In 2010, I would have all the table rows and could access tags and asset information.
I have successfully created and defined a topolgy in Map 3D using a Visual Lisp routine that I cobbled together from CREATE.LSP. What I'd really like to do is be able to access that data and create closed polylines and centroids without going through the menu interface. The only documentation that I've been able to find is the Mapping Commands section of the Help file.
I found several commands, but they rely on user input to work. I might be able to work around this by typing a dash before the command line to suppress dialog boxes except for the fact that MAPCLPLINE does not respond to this method.
I noticed in CREATE.LSP that there was a TPM_MTNBUILD command that (apparently) was used to build the topology. Are there similar commands that I just haven't found yet?