I want to know how can I scale down the red rim proportionally like in this picture? Is there some plug-in for it, or am I missing some feature which can do this?
Attached Thumbnails
i have an image H:3639 W:4849 , now i want to resize it proportionally down to smaller resolution. Why there's no fast way to do scaling proportionally for example 2x , 3x or 1/4x etc. In above example , the only way is by using calculator and input a new custom destination resolution. My opinion is : there should be a button to grab whatever the source size and paste it into the destination h/w and then need a feature to lock the ratio , so while i change the w , the h will adjust automatically (simply like the 'prop' mode in the source area) . Right now i have to do too many 'click' and 'click' just for that simple task.
View 9 Replies View RelatedI am trying to build a curtain wall panel family (see attached). I want the extremities of the solids to be glued to the surrounding frame. I want to be able to scale the model inside the frame with different curtain wall panel system sizes. 5'x4', 6'x8' etc... I am having problems with restricted constraints. I do not know what I am doing wrong. the model inside the panel are created from soild extrusions. if I align the solid extrusion from one side of the frame , only that side will grow or shrink with frame, and makes the model look weird. I tried to group the solids with reference lines in them glued to the reference line grid i created in the panel and that did not work. I want to be to scale proportionally the model inside the panel.
View 6 Replies View RelatedI use a Mac version 10.6.8 and Photoshop CS6.
When I copy and paste a vector image from Illustrator, the vector image is not be sized at 100%x 100%. It comes in at weird sizes like 100% x 98.33% (this is not consistent, it changes numbers). I have to go into the top to manually change it to 100%x100% while in Transform mode.
Also, after I change it to 100%x100% and try to scale by holding shift down, it will change again. I'm not sure what's happening.
I have the following Adobe Illustrator file: [URL] .....
I would like to copy all visible elements of this file, and paste them onto a new file whose size is that of a standard business card. To do this I create the business card AI file in illustrator and then paste the contents of the AI file listed above onto the file with the business card artboard. SINCE THE ARTBOARD IS MUCH SMALLER, I Select -> All and Resize to 2%.
A. What I don't understand is why the bordeaux square in the middle does not resize proportionally when I carry out this operation. Instead it completely shrinks to a much smaller size.
B. Furthermore, I would like to completely get rid of the orange area that falls outside of the artboard. How can I accomplish this second task?
The first layer you start with is the background, I want to know how to scale/re-size it around the image imported. I am trying to create my own Minecraft skin, so I want to re-size the entire default skin image so I can work with finer detail. But i need to create a border around the original image so I can re-size it back to its proper size to be successfully uploaded to the Minecraft webiste as my skin. I cannot make a border because if I do with its current state the border will go over the first outer line of pixels of the image; I just want it to be a pixel outside the image, not on it.
View 1 Replies View RelatedIs it possible to use .png grey scale photo edges (made for photoshop) in paint.net? I found some "frames" that will add various edges to the image (torn edge, lace, ect), but they are in grey scale and I'm not sure how, if I can, to use them in pdn. I'm just wanting to give a ragged or other style edge to my photos or backgrounds to use them for digital scrapbooking and framed photos.
View 13 Replies View RelatedWhat would be the equivalent on Smoke to S in Paint on Flame to scale the brush?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
When I select an image against a solid background to convert it to a transparent background, there are often extra half-background pixels due to the anti-aliasing. Is there a way to either a) scale the selection toward the center instead of from a corner, or use a smarter selection tool to outline an object and convert anti-aliased pixels to their semi-transparent equivalents?
View 2 Replies View RelatedURLs....I could use these almost daily and doing by hand takes ages where these specialized filters perform the given task in seconds with near perfection. But Photoshop is a bit too expensive and i never really liked GIMP for some reason. However i do like Paint.NET a lot (my primary image editor on all my systems) and would really like to see these features in Paint.NET.
View 4 Replies View RelatedI'm still using Maya 2009 because I really hated what they did to 2010 and 2011. Features that I use often were removed. Multilister being one of them. Now I feel like I'm falling behind too much so thinking of upgrading to 2012 but I ran into a few issues while trying out the trial version.
Paint skin weights tool in 2009, I had the ability to set scale value above 1. Flood smooth couple times and flood scale 1.1 couple times and skinning was pretty much done. It was very quick way to dial in skinning and very effective. Now in 2012, I can't set scale value above 1.000. Has this been moved somewhere else or has it just been taken out? Why is Autodesk keep taking out useful features?
I'm trying to put a picture (subject on a plain background) on a grid, with the picture being pixelated enough to match the scale of the grid, but I'm getting stuck trying to keep the detail of the picture as the grid step gets larger. (see below) Sounds impossible, but i know i'm getting caught up in the maths somewhere. Is there a way to manipulate the picture to get the detail in the bottom pic to transfer to the larger grid step of the top pi without changing the size of the grid?
Attached Thumbnails
I have just had to do a complete re-install of my CorelSuite X4 following the addition of a new hard-drive.
I now have the situation in Corel Photo-paint where -
1 I open a grey-scale image (.jpg).
2 I paste (as a new object) an RGB colour item (a previously created .cpt file) onto the grey-scale image.
3 I then "Convert to 16Bit grey-scale" in order to change the whole new image to grey-scale, but the pasted object is being automatically flattened into the image and I can no longer work on that object independently.
I never had this before, as I was always able to convert to grey-scale and the "pasted object" would remain with the mask outlined and still allow me to work on it.
There is a UI bug in PP X6 where the fields for size on the property bar when using the object picker tool show a tooltip "Scale". See screencap
View 1 Replies View RelatedHow can I create a 2D gray scale image from a color image?
View 1 Replies View RelatedI would like to make a composite image with source images making up the various layers (so I can work my magic on each layer indepent of the others). The problem I have is that not all of the images I'm using are to the right scale. What I want to do is resize those layers that are too big. Here's an example...
Let's say I have 5 pictures that I want to use to make one composite image from. The main background layer will be made from an image that is, say 800x600.
Another picture (let's call this subject 1) is 600x600 and is already at the right scale if I cut out the portion I want to keep and lay it on top of the background layer.
Yet another picture (subject 2) is huge (think 2000x2000). I would like to cut out the portion I would like to use and drop it in as a new layer and then obviously re-size it down to the correct scale. I'd prefer to do this directly in the composite image I'm making on its own layer to ensure I get the size right (and without manipulating the image guess-work style before I cut/paste it in).And so on...
I've found ways to make the canvas bigger (not what I want to do)... but not anything on how to resize the images on individual layers without impacting the other layers. Is there a way to do this?
I have just updated to Autocad 2013. While working on existing drawings (previously created in V2012), I am having issues with the SCALE command. Most times, but not always, when I add a line or block, with a base point on an existing line or object and try to scale it, I get an "extremely small scale factor ignored" message, although I did not get a chance to enter a scale factor. While it appears most times, but not always, if I draw a new line in empty space on that same drawing, I am able to use the SCALE command without problems. I also have the same issue when trying to scale an existing line or block, most times but not always.
Here is a copy of the command line while I am trying to make it work:
Command: l
LINE
Specify first point:
Specify next point or [Undo]: 100
Specify next point or [Undo]:
Command: sc
SCALE
Select objects: 1 found
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
Command:
SCALE
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
If you notice, it does not give me the chance to enter a scale factor. As soon as I pick the base point, it skips over to the error message, yet displays the scale factor prompt with a blank factor. I'm experiencing this issue on various files (not all but most), so I don't think it is a corrupt file. Why I get this and if I can correct it?
I have a floor plan with a very long footprint in a "View" drawn at a convenient scale.
The long building had to be broken to be put on several different "Sheets", and each of the floor plans on each of the sheet has a scale.
When I change the scale of the partial plan on one "Sheet", all the other sheets also change to the same scale and also the original view changes to the new scale.
Is there a way to assign the desired scale of the plan on one sheet without affecting the scale on the other sheets and on the original drawing view?
am in the process of setting up a standard file for all designers to use our local office. This file will have most of the styles created for profiles, alignments, surfaces, profile views, etc... as mostly specified by the customer and industry standards.
I am having trouble maintaining the correct annotation scale in the viewport in paperspace and when plotting.
The attached word document has 3 figures. Fig 1 shows the correct viewport scale and correct annotation scale. Fig 2 shows how the annotation scale abruptly changes during the plotting process. This abrupt annotation scale change sometimes happens during the regen process or when I switch from layout to model space and back to layout.The annotation scale goes from 1:1 to 1:40 just as in the viewport. This change in annotation scale is not supposed to happen because I want to preserve a certain plotting height for my text versus a viewport scale by using various annotation scales.
I have researched the procedures for annotation scale and have not found any info related to this "abrupt change in annotation scale".
Curiously , this abrupt change in annotation scale does not happen if the text does not belong to any styles within Civil 3D. Stand alone text stays at the correct annotation scale and is not affected in the same way.
We have recently noticed that after printing a PDF of a drawing I plotted from AutoCAD we are coming up with differences when we double check the scale on the printed hardcopy using a carpenter ruler.
For example, there is a dimension labeled on the drawing of 200 ft. However, if I try to scale this out with a carpenter's ruler at the drawing was set to (say for instance it is 1 inch = 100 ft) I am coming up short of the 2 inches it should be (typically come up around an 1-15/16" or around 194 feet, approx 97% of the correct amount).
In the Page Setup Manager in AutoCAD, I have the following options selected (see the print screen as well):
Printer/plotter selected: DWG to PDF.pc3
Paper Size: ANSI full bleed B (11.00 x 17.00 Inches)
What to Plot: Layout
I don't have a plot scale scale other than the default 1" = 1'
No plot style selected
Then, on the print menu when I open the PDF that I have exported from AutoCAD, I have the following settings (see the print screens I have attached):
Printer: The printer I use (Konica Minolta c650 Series PCL)
And I have selected the Options "Auto Rotate and Center" and "Choose paper source by PDF page size**"
** Note, that I have tried unselecting the "Choose paper source by PDF page size" option and accordingly changed the paper size in the "Page Setup..." button at the btoom to match the document size (i.e. 11.0 x 17.0in) and it gets the difference to be closer (i.e. I now get 198 ft but some of my border gets cut off). See the print screen below for this a print screen of the print menu and sub-menu of Page Setup showing the paper size selected.
I saw that some people in other forums state that there is no real solution when trying to scale off of PDF's and that there should be a disclaimer saying as much if you are to send the file out to a customer who may rely on doing some in the field scaling from the printed copy of the PDF file. I find it hard to believe there is no solution as we have received some drawings from others whom the scaling works just fine.
When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
I am working on automating page setups in model space and am looking for a way to set the plot scale equal to the annotation scale for scaled drawings with
(setvar "filedia" 0)
(setq a (getstring (getvar "cannoscale")))
(command "-plot" "YES" "MODEL" "" "" "" "" "" "" !A "" "" "" "" "" "" "_Y" "_N")
Setting the plot scale with !A causes the lisp to fail. However, when running each prompt through the command line individually, !A works fine. what is missing?
When I'm editing pix, and need a quick large solid brush for a couple seconds, (1-inch dia), I slide "scale", but it's nearly impossible to manually rest scale back to default without restarting Gimp...
Can there be a dot-button beside scale that auto-sets scale back to default..? and/or a timer on scale changes that resets scale back to default after ten-seconds..?
I am trying to insert a block into a file in Acad 2014 and it comes in too large. If I insert the same block into the same file using Acad 2012 it comes in at the correct scale. Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.
There must be some variable or variables I'm missing.
I have a Viewport set to scale 1:100 and the Viewport is locked.The Annotation Scale displayed in the Viewport was 1:50.
When I clicked on the Synchronize Icon beside the Viewport Scale, the Viewport Scale changed, even though the Viewport was locked.
I was expecting the Annotation Scale to synchronize to the Viewport Scale.
Is this how it is supposed to work? and why does a locked Viewport Scale change?
I have a block that i would like to scale based on the plot scale when plotting.
We set up our drawings full size and occasionally we want to plot them at half size. We do this by setting the plot scale to 1:2 (custom) in the plotting dialog. We have a few blocks that we want to print at the same size on paper, essentially become twice as big.
Is there is a way to fix the size or just set a few scale states and have them automatically adjust based on the plot scale (not drawing/annotative scale)?
I have a drawing with several layouts, and in one particular layout only, I want the text to be smaller than the annotation scale would dictate (the viewport is 1"=300', but I want the text to display at 1"=50' annotation scale).
I tried selecting the viewport and changing the "annotation scale" property to 1"=50', then the "standard scale" property to 1"=300'.
Strangely, this seems to work for a bunch of MText objects I have in the drawing, but it won't work for an alignment station label group or for a particular linetype...for some reason, those two things insist on having their annotation scale equal to the viewport scale.
I tried messing around with the alignment station label group's style but couldn't figure anything out. As far as the line/linetype, I'm completely at a loss why that one wouldn't change.
I have a 3D part, which I want to scale down to 0.5 the size in X and Y direcions, but I don't want to scale it down in Z direction.
Is this even possible? How do I go about doing it?
AutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.
View 1 Replies View RelatedI work in autocad 2010 and I draw in scale 1:1 . What an annotation scale is, moreover I have never used annotative objects in my drawings.
Nonetheless, when I try to plot a drawing, while I am in the model view, I choose the scale in mm/units, I select the plot area and when I press preview or plot, I get the message THE ANNOTATION SCALE IS NOT EQUAL TO THE PLOT SCALE. DO YOU WANT TO CONTINUE?
I press yes, I print it and the outcome is always a bit smaller than it should be.
When i am in the layout mode and I try to plot, I dont get this message. But I dont know how scaling works in this case. For example I want to plot in a A4 paper, scale 1:100. So I type 1000mm/100units, as I did in the model mode, but the result is wrong.
I would like to find a lisp that changes the scale of something that has an annotative scale and deletes all other scales in the object scale list. Often i have many different scales of existing dimensions or objects. i waste a lot of time opening the annotation object scale dialogue box, selecting add, finding my scale and deleting the old scale.
View 3 Replies View Related