After upgrading to3.5, my scanned images from negatives (tiff dng files created in Vuescan 9) crash the program as soon as I make an adjustment in the lens corrections panel. This was not an issue before I upgraded from 3.4.1. Worse, the scanned images that I edited with the lens corrections panel before upgrading crash the program as soon as I try to bring them into the develop module.
View 3 Replies
I have scanned something in OS X Mavericks (10.9.0) using my Canon PIXMA MP280 and am attempting to add it to my main Lightroom catalog (LR 5.2) but am having issues. I have tried the following formats with the noted results:
.TIFF - Lightroom throws error "The file appears to be unsupported or damaged. (1)" .JPG - Lightroom does not show the file in the import dialog, thus does not even attempt to import it. .PNG - Imports ok.
The .TIFF and .JPG formats seem compeltely intact as they open without any issues in OS X Preview and Pixelmator.
I recently installe LR5 beta and imediately had a problem where it started crashing during cropping. I went back to LR4 & that too started crashing. I bought LR5 & now am trying to sort some shots out but it keeps locking up my mac.
Running on OSX 10.8.4
I just bought a new scanner, and after few days , it started scanning like this :
as you can see those lines, what are they ? setting problem ? or scanner problem ? and if scanner problem any way to hide them in ps ?
After scanning a image that has a mostly white background, and opening it in Photoshop CC that portions of the edges had pinkish tones that was quite noticible. I tried to use the replace color from the "Image->adgustments" menu but found that affected small portions of the image as well.
How do I correct this so the background is white? Is there a correction filter for scanners like there is for cameras?
I am on a Mac OS 10.5.8 with Adobe CS2, Acrobat 7.0 Professional, and Illustrator and Bridge.
I have a bunch of print-outs of old documents that came from a microfilm copy. I need to include them in a report, so I need to scan them in. I have tinkered with various settings (100 dpi - 300 dpi) and of course I would like to keep them small sized. At 300, one came in at 10 MB which is absurd.
My second problem is that part of the print-outs are really difficult to read--it's usually one section that has a lot of mid-tones. I can use levels and curves somewhat, but they seem to affect the whole document.
I recently migrated from Windowx XP (32 bit) to Windows 7 (64bit). On the xp computer, I installed the driver for my epson V500 photo scanner, and when go to File--> Import, there is an option to import via espon scanner. However, in Window 7, with Photoshop CS4 64 bit installed, the installed scanner does not show up on the import menu.
I don't know how to get it to see the scanner as it does on my XP machine. I tried copying the photoshop plugins/import-export folder from the xp machine to photoshop (64)/plugind/import-export folder, but that didn't make a difference.
I really need the scanner to be visible inside photoshop.
I am trying to scan some kids artwork and import into photoshop - I can do that bit!
Then I want to crop the image so that it is around the edge of the actual picture. That is - I dont want a butterfly shape (for example) with a white box around it.
I want to paste the images onto a background colour and don't want the white square around the shape on the background!
know if I can save the image like that in photoshop!
I often scan b/w documents with my scanner to Photoshop. The scan always has spots (noise) which are time consuming to remove. I'm basically zooming in and erasing each one.
Does anyone know of any easy time saving steps/procedures I could use to remove these spots?
I have been photoshopping (Photoshop 7) for the past 9 months, and I'm fairly comfortable with the program. I use it mostly for art and drawing.
However, recently, I've run into a bit of a problem. You see, up until a month ago, I would scan a penciled drawing of mine in, add a layer over it, and trace it with the brush. It worked pretty well, never gave me any trouble accept for the large amounts of time it would take to trace everything with a mouse.
So, about a month ago I was looking for coloring tips, and I found that most people ink their drawings, scan them in, and somehow color it. I thought I had the answers, but I didn't.
I scanned an inked picture at 300 dpi with my Canon scanner (I don't know the exact model, but it was cheap, and I got what I paid for). I brought it into PS, and I tried using the magic wand tool (with a tolerance of 175) to pick up all the black ink.
I am in the process of scanning about 50 photo albums almost all B&W prints so I decided to try out the divide scanned images plugin however I am having trouble getting it to divide some of the images it wants to cut some of them in half and I am at a loss of how to adjust to get it to behave.
View 5 Replies View RelatedI have scanned three pictures, using a green background, Epson WF-2540, saved to my pictures. I see the jpeg in organized, load in to editor, I can crop, rotate fix, but the divide scanned images function is not highlighted and thus does not work. ?
View 4 Replies View RelatedJust scanned an image at 600dpi resolution, is it ok for printing a 2' x 1' image from a studio ? or should I go for high resolution ? + There is some dust at that resolution so how can I get rid of it ?Thanx waiting for your replies.
View 4 Replies View RelatedI have scanned in a document and need to change it to digital art. Since I haven't been able to find a suitable font to match it exactly, I am thinking I'll have to do it by hand.
A sample of the text is below. Should I use the pen tool for this? Or some other tool? I would be glad if you could point me in the right direction. As you can see, the document's blurry so I can't just use a marquee.
I need to produce a DVD that will use scanned images and then import both music and a voice over narration track. Which Abobe product is easiest and cheapest to use. I heard you could do this with Elements.
View 1 Replies View RelatedI could seperate multiple images - like an old photo album page - with my old Photoshop. I can't find that on my new CS6.
View 1 Replies View RelatedI'm relatively new to photoshop and I have been searching for a simple answer to this question.
I'm working with images scanned from 35mm transparency film and black and white negatives. The average size when opened in photoshop is .88inches width x 1.297inches height at 2000 pixels/inch. I'll be putting these images on the web as well as printing some.
My question is:
Can I work with them as-is in photoshop and change the size later (for web, printing etc) or is there some general size I should change them too prior to working on them in photoshop CS5 extended?
how can i view all of a 200mb tiff file of scanned images in Ps? "windows photo viewer" opens all 5 pages of the tiff file. Ps appears to only open the first page of images. how can i view all 5 pages of images in Ps.
View 3 Replies View Related4705.sample2.tifOur customers have given us some black and white .tif Monochrome Bitmap images at 400 ppi (see attached sample) and 600 ppi of some scanned black and white engineering drawings. Some of the small text on the drawings is not very legible because open areas are filled in with black. Some of the vertical and horizontal lines are ragged (digitized) on the edges. Is there any way that I can improve the visual quality of these Monochrome Bitmap images in Corel Draw (which I use) or Corel Paint (of which I'm not very knowledgeable, or adept)?
View 2 Replies View RelatedI'm working on a job that requires recreating vintage box artwork. This involves recomposing scanned images into a new layout, recreating text from matched fonts - that sort of thing. Unfortunately, some of the scanned images (originally printed offset press in cmyk) were printed with one or more of the plates out of register, creating a halo effect on one side. Can this be corrected in PhotoPaint? Is there a way to create each channel as an object which could be moved to realign the colors and then flattened again?
View 9 Replies View RelatedIs the image trace feature any better at tracing scanned business cars and newsprint ads in order to extract a logo? Clients never seem to have clean copy to supply me with.
View 1 Replies View RelatedMy CS3 has been crashing every single time I work with a portrait style image... I don't have any other issues except this one.
I can open the raw file and edit it, but when I create a new canvas and move the file over into the new canvas it freezes and crashes... I can do the exact same thing with a landscape style image and it never even flinches. My computer easily meets the requirements to run CS3, so I don't know what the issue is since it only occurs with vertical images.
I was trying to open an image that had already been processed by me in CS6 on this laptop.
When i select the image that i want to open CS6 launches but then i recieve an error message saying that CS6 is unable to open the image. Frustatlingly this does not happen with every image.
One person has said to reinstall the software but i downloaded it from the Adobe site and don't wnt to end up paying twice.
System info
Processor Intel(R)Core(TM)i3-2350M @2.30Hz 2.30GHz
Installed memory Ram 8.00 (7.89 usable)
System type 64 bit
Plug ins
Alien Skin - Exposure 4
Anthropics -Portrait Proffesional
successfully scanning photos into My Pictures. have been able to import first batch into LR3 but having a problem with the last half. i get the following message on the problem files " preview unavailable for this file". when i double click the file i get the following message "could not read preview".
using a nikon coolscan V ed negative scanner and vuescan software. no difference in naming of files between imported ones and unimported ones. again, all files successfully scanned into My Pictures.
Am getting error message: Could not move a file to the requested location.
Scans have been saved on dvd, numbered as Scan_1 (680).tif, Scan_1(681).tif, etc.
Is it the parenthsis in the file numbers? If so how can I chance to make it work. Looking at over 1000 files.
I have a large amount of scanned negatives. The date of most of the negatives are known. How can I change the date in LR, or other program, so they will show up correctly - when sorted by date in LR?
View 6 Replies View Relatedi have scanned 35mm B&W negs into LR4. have printed about 40 images. all have different tones. some have blue or green or brown tones. some images are warmer than others and some colder.
the temp and tint scale are grayed out. impossible to have all images with same exp/contrast/etc.i have been told that when presenting a b&w body of work, all printed images have to have a similar tone.
Light-room 5.2, Windows 7 Home Premium 64 bit.
I have some scanned photos from a trip to England in 1996. I have assigned to each photo the date it was taken. Lightroom clearly displays the date taken. But two photos will not sort properly by date, as you can see in the screen capture; the highlighted photo was taken August 31, 1996, and sorts between photos taken Sept 2, 1996 and Sept 3, 1996.
Why won't lr3 recognze files in a folder that were made from scans.
View 3 Replies View RelatedI started scanning my film & transparency archive and the next step is to import the scans into LR5, but I don't know how to add additional folders into the catalog. So far I have 75 folders going back over 30 years. Assuming I should import the scans into folders by year they were shot and not by the scan date.how I go about importing these folders into LR.
View 7 Replies View RelatedI use a Nikon D800. When I import files from the camera using Nikon Transfer 2, and at the same time try to import files into LR 4.4, LR 4.4 crashes. If I use Bridge to browse files under the same circumstances, it works fine.
I run Windows 8 Pro 64bit. All drivers are upto date as are all software versions. Firmware on the camera is also up to date.
